Search results for: 'fiber g'

REFERENCE NUMBER: L-4307
WITH INCLINED APRON, DOUBLE-ROLL CLAMP, RECIPROCATING LAPPING, BOTTOM-APRON OUTLET
VERTICAL THICKNESS CONTROLLED BY RECIPROCATING LAPPING: 30mm TO 150mm
INPUT APRON WIDTH: 2700mm
INPUT APRON SPEED:≤40m/min (ADJUSTABLE)
OUTPUT APRON WIDTH: 2700mm
OUTPUT APRON SPEED:1 TO 12m/min (ADJUSTABLE)

Learn More

P-5042 JOPER CAST IRON SMALL BATCH ROASTER 5 KILOS

JOPER
CAST IRON SMALL BATCH ROASTER
5 KILOS
JOPER 5 KILOS AUTOMATIC PROFILING CONTROLS. SHIPS WITH YOUR ELECTRICAL AND GAS SPECIFICATIONS. FEATURES THE SAME CAST IRON ATTRIBUTES OF THE OLD PROBAT SCHOOL. THE DRUM ROASTING MACHINE RUNS QUIETLY DUE TO THE HIGH FIBER INSULATION AND NO PULLEYS OR CHAINS IN ITS DESIGN. CHAFF REMOVAL IS QUICK AND EFFICIENT DUE TO THE FREE STANDING DESING. THE POWERFUL SELF CLEANING ROASTING AND COOLING FANS ALLOWS THE SEPARATE AIRFLOW. TWO MODELS: MANUAL AND PROFILE (AUTOMATIC)

DATA:
LOAD CAPACITY 11/POUUNDS BATCH 44 POUNDS PER HOUR
ROASTING TIME 15 MINUTES COOLING 3 MINUTES
NATURAL GAS OR PROPANE
ELECTRICAL REQUIREMENTS CAN NE BEUILT TO YOUR SPECIFICATIONS.
220v 3 PHASE IS THE MOST QUIET, BUT THE ELECTRICAL CAN BE BUILT TO YOUR NEEDED VOLTAGE AND PHASE.
LOW NOX PRECISE BURNER ADJUSTMENT
WEIGHT WITH COOLOR AND CHAFF 992 POUNDS
DIRECT DRIVE SEPARATE MOTORS (4 OF THEM)
REQUIRED FLOOR SPACE: 56 INCHES WIDE 84 INCHES FRONT TO BACK, 79 INCHES HIGH
(DIMS INCLUDE EXTERNAL CHAFF COLLECTOR)
BURNER POWER: 95,000 BTU
BUILT TO UL295 STANDARDS

QUANTITY: 1

Learn More

V-1042 RIETER SPINNING PLANT OF ABOUT 20,500 SPINDLES

01 X RIETER A10 UNIFLOC, YEAR 1998, LENGTH 38 METERS
01 X RIETER B2/5 WASTE FEEDER, YEAR 1998
01 X RIETER B11 UNICLEAN, YEAR 1998
01 X RIETER B7/3 UNIMIX, YEAR 1998
01 X RIETER B60 UNIMIX, YEAR 1998
02 X JOSSI FOREIGN FIBER DETECTORS, ED-33-1200-1 YEAR 2002
02 X RIETER A20+A21 CONDENSER, YEAR 2002
01 X RIETER B11 UNICLEAN, YEAR 2002
01 X RIETER B7/3 UNIMIX, YEAR 2002
01 X RIETER B60 UNIMIX, YEAR 2002

06 X RIETER C51 CARDS, YEAR 1998
11 X RIETER C51 CARDS, YEAR 2002
AUTOMATIC COILER
CAN SIZE: 600 MM X 1200 MM

02 X RIETER SB-D10 DRAW FRAMES, YEAR 1998
02 X RIETER RSB-D30 DRAW FRAMES, YEAR 1998
03 X RIETER SB-D15 DRAW FRAMES, YEAR 2002
04 X RIETER RSB-D35 DRAW FRAMES, YEAR 2002

01 X RIETER E32 UNILAP, YEAR 2002
05 X RIETER E62 COMBERS, YEAR 2002
01 X KAIGON UNILAP 2, YEAR 2012
06 X RIETER E7/5 COMBERS, YEAR 1987

04 X RIETER F10 ROVING FRAMES, YEAR 1998, 120 POSITIONS
03 X RIETER F11 ROVING FRAMES, YEAR 2002, 144 POSITIONS

08 X RIETER G33 RING FRAMES, YEAR 1998, 1104 SPINDLES, DIAM. 42 MM, GAUGE 70 MM, TUBES 210 MM, DRAFTINGS P3-1
10 X RIETER G33 RING FRAMES, YEAR 2002, 1200 SPINDLES, DIAM. 40 MM, GAUGE 70 MM, TUBES 200 MM, DRAFTINGS P3-1

04 X SCHLAFHORST AC 238 WINDERS, YEAR 1998, 60 SPINDLES
04 X MURATA 21F MURATEC WINDERS, YEAR 2002, 60 SPINDLES
AUTOMATIC FEEDING
USTER QUANTUM IMK-C20-F20 CLEARERS
5.57 CONICITY
WAXING

Learn More

P-5079 COMMERCIAL JOPER CAST IRON CRM-30 ROASTER 30 KILOS

WHAT WE HAVE HERE IS A VERY RUGGED CAST IRON ROASTING FRAME AND ROASTING CONTACT CLEARANCES WITH THE MACHINE - JUST PLAIN SOLID AND DOES NOT MOVE UNDER LONG OR EXTENDED USE. DOUBLE WALL DRUM MEANS THAT THE HEAT IS ALL DESIGNED TO GO THROUGH THE CENTER OF THE ROASTING CHAMBER, NOT "ONTO" THE DRUM EXTERIOR. TOTAL TRUE CONVECTION. NOT ONLY IS THIS THE SAME STYLE FROM THE OLD GOTHOT & BARTH ROASTER DAYS. . . BUT EVEN BETTER AS THE SHAFT DESIGN SO THAT BEARINGS ARE EXTERNALLY MOUNTED AND ADDITIONALLY ARE AIR COOLED FOR LONG LIFE AND TROUBLE-FREE CONTROL. EVEN THE SIDE PANELS OR PRODUCT FLIGHTS HAVE A LONGER CURVE POSITIONING MORE PRODUCT FLOW INTO THE HOT AIR STREAM, RESULTING IN A SLIGHTLY MORE RAPID ROAST WITH MORE EVEN BEAN INTERIOR AND EXPANSION THAT FRANKLY LEADS THE INDUSTRY.

ALL THIS COMMENTARY ABOVE MEANS THIS ROASTER SIMPLY IS MORE QUIET THAN ANYTHING ON THE MARKET. PERIOD. THERMAL INSULATION WITH HIGHEST QUALITY OF FIBER FOR LOW GAS CONSUMPTION; DIGITAL TEMPERATURE CONTROL. CYCLONE IS SEPARATE. THE COOLER, BEING TOTALLY SEPARATE ALSO HAS THE LARGEST AIR COLLECTION AREA OF ANY ROASTER MADE ALLOWING FOR TOTAL AMBIENT COOL COFFEE IN LESS THAN THREE MINUTES. ADD TO THIS PACKAGE A LOADER OR YOUR CHOICE OF DESTONERS AND EVEN YOUR CHOICE OF CONTROL METHODS.

DATA INFORMATION:
BATCH CAPACITY: 30 KG / 66 LBS
CONTROL DESIGN: MANUAL
CAPACITY PER HOUR: 120 KG / 265 LBS
ROASTING TIME: 12-18 MIN (4 BATCHES AN HOUR)
EXHAUST AIR TREATMENT: OPTIONAL
COOLING CYCLONE: OPTIONAL
PRE-COOLING WITH WATER IN DRUM: OPTIONAL
COOLING TIME: 3-4 MIN
TYPE OF COOLING: AIR AMBIENT
SAFETY DEVICE: YES
BURNER POWER: 110 KW / 375000 BTU
BURNERS MANUFACTURER: RIELLO
OPERATION TYPE BURNER: BS2D-2 STAGE
FUEL TYPE: PROPANE/NAUTRAL GAS/DIESEL
SIDE OF OPERATION: LEFT
POWER REQUIREMENTS: 20 AMP
VOLTAGE/FREQUENCY/PHASES: 400+N-230 V / 50-60 HZ / 3 PH
9 AMP. . . 3 PHASE 50/60 HZ PREFERRED, YOUR CHOICE OF 220/440 - SINGLE PHASE AVAILABLE AT SPECIAL REQUEST
(NOTE ON 3 PHASE. . . NOT ONLY IS IT LESS EXPENSIVE TO OPERATE, BUT IT RUNS MORE QUIETLY THAN SINGLE PHASE WHENEVER OR WHEREVER IT IS USED. KEEP THIS IN MIND FOR ANY MACHINERY.)
Ø EXHAUST CHIMNEY (ROASTER CYCLONE): 250MM / 9,8 INCH
Ø EXHAUST CHIMNEY (COOLER): 250MM / 9,8 INCH
Ø HOPPER ROAST CHIMNEY: 150MM / 5,9 INCH
ROASTER WEIGHT WITH CYCLONE: 1050 KG / 2310 LBS
COOLER WEIGHT: 300 KG / 660 LBS
ROASTER FAN MOTOR: 1, 5 HP
COOLER FAN: 4 HP
DRUM GEARBOX: 1 HP
COOLER GEARBOX: 0, 75 HP
BUILT TO UL295 STANDARDS.

QUANTITY: 1

Learn More

C-4227 EREMA RM120TVE FILM/FIBER PELLETIZING LINE, EXTRUDER 120mm, YEAR 2000 - NEW

EREMA PELLETIZING LINE NEW
MODEL: RM120TVE FILM/FIBER
YEAR: 2000
LINE CONSISTS OF THE FOLLOWING:
EREMA MODEL RM120TVE
120mm EXTRUDER WITH 36/1 L/D DOUBLE VENTED BARREL
EXTRUDER IS DRIVEN BY A 160KW AC MOTOR WITH INVERTER
DOUBLE VENT INCLUDES A STAINLESS STEEL DEKER VACUUM PUMP
APPROXIMATELY 50 CUBIC FOOT STAINLESS STEEL CUTTER/COMPACTOR MOUNTED AT FEED SECTION
AND FED BY A 35″ WIDE X 20′ LONG INCLINED BELT CONVEYOR
CUTTER COMPACTOR DRIVEN BY A 105 KW
480 VOLT AC MOTOR

QUANTITY: 1 LINE

Learn More

M-6053 SPUNBOND PRODUCTION LINE, WORKING WIDTH 4040mm TO 4500mm

OFFER 001
SPUNBOND PRODUCTION LINE
WORKING WIDTH: 4040mm
WEIGHT: 130 TO 250 G/M2

OFFER 002
POLYMER CLEANING GROUP

OFFER 003
CRYSTALLIZING GROUP

OFFER 004
DRYING GROUP

OFFER 005
PNEUMATIC CONVEYING SYSTEM

OFFER 006
EXTRUDER HOPPER

OFFER 007
EXTRUDER

OFFER 008
FILTERING UNIT

OFFER 009
MELT TRANSFER LINE

OFFER 010
SPINNING BEAM

OFFER 011
SPINNING PACKS

OFFER 012
FILAMENTS QUENCHING SYSTEM

OFFER 013
FILAMENTS DRAWING AND DISTRIBUTION SYSTEM

OFFER 014
WEB FORMING CONVEYOR BELT

OFFER 015
CREEL FOR APPLICATION OF REINFORCING FILAMENTS

OFFER 016
PRE-NEEDLING MACHINE

OFFER 017
NEEDLING MACHINE

OFFER 018
THERMOSETTING UNIT

OFFER 019
OUTLET CALENDER

OFFER 020
FOULARD

OFFER 021
BINDER PREPARATION SYSTEM

OFFER 022
DRYER

OFFER 023
OUTLET CALENDER

OFFER 024
AUTOMATIC WINDER

OFFER 025
AIR COMPRESSORS (FOR FILAMENTS STRETCHING EJECTORS)

OFFER 026
DIATHERMIC OIL HEATING SYSTEM

OFFER 027
CHILLED WATER CIRCULATION AND GENERATION SYSTEM

OFFER 028
EQUIPMENT FOR CLEANING CYCLE, SPECIAL TOOLS

OFFER 029
FIBRE DUST RECOVERY SYSTEM

OFFER 030
EDGES RECOVERY SYSTEM

OFFER 031
SPINNING SECTION STEEL STRUCTURE

OFFER 032
DISTRIBUTION ELECTRIC CABINETS

OFFER 033
PROCESS ELECTRIC SYSTEM OF EXISTING MACHINES ACCORDING TO THE ACTUAL LAYOUT

OFFER 034
CABLES AND CABLING MATERIALS

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: C-2505 AIR LAID LINE YEAR 2000 WIDTH 2400mm, CONTINUOUS OVEN FOR THERMOBONDING YEAR 2010 WIDTH 2600mm, LONGITUDINAL & TRANSVESAL CUTTER YEAR 2000 WIDTH 2500mm SPECIFICATIONS: NO. 1 AIR-LAY LINE BY "LAROCHE" – FRANCE NO. 1 CONTINUOUS OVEN FOR THERMOBONDING OF NONWOVENS BY "SICAM" - ITALY NO. 1 LONGITUDINAL AND TRANSVERSAL CUTTER BY "AUTOMATEX" - ITALY QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: X-0008 ELECTRONICALLY CONTROLLED SEMI-AUTOMATIC FILLING FOR PILLOW, CUSHIONS, QUILTS, BABY MATTRESSES AND MORE THIS MACHINE IS A STAND-ALONE AND VERY VERSATILE PILLOW STUFFING AND BAGGING MACHINE. ITS SIMPLE OPERATION ALLOWS TO USE THE SAME EQUIPMENT TO ACCOMPLISH THE TWO PROCESSES: STUFFING A BATT OR A FOAM CORE IN A COVER (OR AN INSERT IN THE FINAL DEC COVER / A PILLOW IN THE FINAL ZIPPERED COVER) AND/OR PUT A FINISHED PILLOW IN A BAG (INDIVIDUAL PE BAG, TWIN-PACK BAG, ZIPPERED VINYL BAG, ETC). THE MACHINE CAN BE LOADED MANUALLY OR WITH A CONVEYOR ON THE REAR PART, WHILE AN OPERATOR IS NEEDED IN THE FRONT: HE PUTS THE COVER/BAG ONTO THE STUFFING BELTS, ACTIVATES THE TENSIONING FORKS WITH THE PEDAL AND HOLDING THE COVER/BAG FACILITATES THE PILLOW STUFFING. POWER SUPPLY IS 400 VOLTS, WILL NEED A TRANSFORMER TO OPERATE ON 480 VOLTS, INQUIRE IF NEEDED Learn More

REFERENCE NUMBER: K-1291 INNOVATIVE SEWING TECHNOLOGY FOR HIGH QUALITY CUSHIONS SPECIFIC FOR PRODUCING CUSHIONS OF SOFAS AND ARMCHAIRS, IN FOAM PARTIALLY OR TOTALLY COVERED WITH DACRON, EVEN WITH MECHANICAL PARTS, BABY MATTRESS, BEDSOFAS, CARAVAN BEDS WORKS WITH MANY KINDS OF MATERIALS: FOAM, DACRON (FOR FOAM THICKNESS: UP TO 20mm. ALSO HIGH DENSITY; FOR DACRON: UP TO 1000 GRAMS DENSITY), SYNTHETIC FIBER, COTTON, NON WOVEN, FEATHER, FIBRES, RECYCLED FIBRES AND FIBERBALLS. THE RESISTANT AND ELASTIC SEAM ALLOWS THE ELIMINATION OF THE USE OF GLUE, MAXIMIZING THE QUALITY OF THE PRODUCT AND GIVING ADDED VALUE TO THEIR PRODUCTION FACILITATES THE UPHOLSTERER OPERATIONS DURING THE SOFA CONSTRUCTION, GIVING ADVANTAGES THROUGHOUT ALL THE PRODUCTION PHASES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4636 (SHORT FORM) (1111TCWBXX10) L NONWOVEN POLYESTER FIBERFILL LINE FOR BEDSPREADS , QUILTS , DUVETS OR SLEEPING BAGS WITH 3 GARNETTS AND ONE OVEN (PROCTOR) THIS LINE IS COMPLETE WITH BLENDING LINE , THREE 60” GARNETTS 3 CAMEL BACK CROSSLAPPERS ETC ONE SINGLE PASS OVEN EXIT 110” (2800mm) STILL INSTALLED ON THE MILL FLOOR QUANTITY AVAILABLE: 1 THIS IS THE SECOND LINE Learn More