Search results for: 'All ti'
-
P-3516 BALEMASTER AUTO-TIE BALER WITH PAPER SHREDDER AND LOADING CONVEYOR YEAR 1989P-3516 BALEMASTER AUTO-TIE BALER WITH PAPER SHREDDER AND LOADING CONVEYOR YEAR 1989
BALEMASTER
AUTO-TIE BALER WITH PAPER SHREDDER AND LOADING CONVEYOR
YEAR: 1989
6’ WIDE x 32’ LONG INCLINED LOADING BELT CONVEYOR:
ORIGINAL INSTALLATION:
THE ENTRANCE WAS BELOW FLOOR LEVEL ALLOWING FLOOR LEVEL, PUSH-TYPE LOADING. PRODUCT THEN FALLS ONTO A SHORT SECTION OF SHREDDER FEEDING CONVEYOR
EQUIPPED WITH:
24 INCHES HIGH SIDE GUIDES
AUTO BELT TRACKINGBALEMASTER
SERIES 1350J-62 PAPER SHREDDER
62 INCHES WIDE
SPECIFICATIONS:
MOUNTED TO TOP OF BALER FEED CHUTE
WAS USED FOR MAGAZINE EDGE TRIM & NEWSPAPER, BUT CAN BE USED FOR OTHER MATERIALSBALEMASTER
MODEL: 4025C-8
AUTO TIE BALER
YEAR: 1989
SPECIFICATIONS:
MATERIALS: NEWSPRINT, MAGAZINES, CORRUGATED CHIPBOARD, FIBERBOARD, BOXBOARD
BALESIZE: 28 INCHES W x 36-1/2 INCHES H x UP TO 84 INCHES LONG
BALE WEIGHT: 1,440 POUNDS @ 72 INCHES LONG
OPENING SIZE: 17 INCHES x 32 INCHES
BALER HEIGHT: 48 INCHES
BALER HEIGHT WITH CHUTE: 72 INCHES
CYLINDER DIAMETER: 8 INCHES
THRUST: 150,900 POUNDS @ 3,000 PSI
NUMBER OF WIRE REELS: 5 @ 100 POUNDS EACH
(10) AUTO TWISTER HOOKS, (5) CUTTERS PER SIDEEQUIPPED WITH:
AIR COOLED HYDRAULIC OIL COOLER FOR CONTINUOUS OPERATION WITH ITS OWN MOTOR & PUMP WATER SPRAY SYSTEM
(2) 5’ LONG BALE TAKE-AWAY TABLESMOTOR DATA: 25 HP BALER, 230/460/60/3
NOTE: INSTALLATION ASSISTANCE AVAILABLE
QUANTITY: 1
Learn More -
F-1427 FEATHER FILLING MACHINE MODEL SR-1REFERENCE NUMBER: F-1427
FEATHER FILLING MACHINE MODEL SR-1
PRODUCT FEATURES
• FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL
• AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY
• FILLING TIME IS 2 TO 5 SECONDS
• NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC
• CE CERTIFICATE
• PRODUCT NAME: WEIGHING DOWN & FEATHER FILLING MACHINE
• TYPE: SR-1
• DIMENSION: 7500 x 2500 x 3500MM
• VOLTAGE: 200/380/415V 50/60HZ 3PHASE
• POWER: 11KW
• FILLING RANGE: 2 TO 100 G, DEPENDING ON THE MATERIAL
• ACCURACY: ±0.5G，±1.0G，±1.5G,DEPENDING ON THE FILLING WEIGHT
• AIR SUPPLY: 0.5 TO 0.8MPA
• WEIGHT: APPROX. 800KG
• THE AUTOMATIC DOWN AND FEATHER FILLING MACHINE IS MAINLY USED TO PRODUCE JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS AND COMFORTERS THAT MADE WITH DOWN AND FEATHER MATERIAL BY COMPUTERIZED WEIGHING SYSTEM.
• THREE HOPPER-SYSTEM( FOR ONE FILLING PIPE) FOR CONSTANT SUPPLY
• THE SYSTEM IS THE VACUUM FILLING FUNCTION AND DOES NOT HURT THE MATERIAL; IT KEEPS THE ORIGINAL ELASTICITY AND SOFT HAND FEELING.
• ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 GRAM. IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT AND CHOOSE TOTAL ERROR OR SINGLE ERROR FROM THE CONTROL PANEL. THIS CONTROLS FOR THE PRODUCTION QUALITY AND MATERIAL WASTE
• ONE FILLING PIPE CAN BE HANDLED BY 1 OPERATOR BY VERY SIMPLE OPERATION WHICH SAVES YOU A BIG AMOUNT OF LABOR COSTS..
• THE KEY ELECTRICAL COMPONENTS ARE IMPORTED, SO THAT THE QUALITY IS RELIABLE AND STABLE.
• THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM
• ACCORDING TO DIFFERENT QUANTITY AND QUALITY REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 DIFFERENT RECIPES AND EACH RECIPE CAN BE 80 SETS DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS
• AVERAGE FILLING TIME CAN BE 2 TO 5 SECONDS (DEPENDING ON THE WEIGHT AND FABRIC) AND THE FILLING TIME CAN BE ADJUSTED
• DIFFERENT CUSTOMER REQUIREMENTS CAN BE CONSIDERED BY OUR PROFESSIONAL ENGINEERS TO WORK ON OUR MACHINES TO MATCH THE CUSTOMER’S NEED.
• MATERIAL HOPPER: DIA. 1700 x 2500MM 1PCS
• WEIGHING SYSTEM: 1200 x 1000 x 1000MM 3 PCS(6SETS)
• FILLING TABLE :1200 x 550 x 1500 2 PCS
• PLC CONTROL SYSTEM AND CONTROL PANEL: 2 SETS
• AIR OUTPUT BOX: 1200 x 1800 x 1700MM 1 PCS
• MATERIAL FEEDING BOX: 1200x1200x2500MM 1 PCS
• BLOWER: 6PCS
• PIPE SYSTEM: 1SET
Learn More -
C-4354 FULL-AUTO HIGH SPEED WET TISSUE FOLDING MACHINE Y-2700(A) AND FULL-AUTO WET TISSUE PACKING MACHINE Y-360, CAPACITY 40 TO 120 PCS/PACKAGEREFERENCE NUMBER: C-4354
FULL-AUTO HIGH SPEED WET TISSUE FOLDING MACHINE Y-2700(A) AND FULL-AUTO WET TISSUE PACKING MACHINE Y-360, CAPACITY 40 TO 120 PCS/PACKAGE
DETAILS:
Y-2700A+360 FULL AUTOMATIC WET TISSUE FOLDING AND PACKING MACHINE
MAKING 40PCS TO 120PCS/PACK WET WIPES
IS A MACHINE THAT CAN SLITTING THE BIG JUMBO RAW MATERIAL, FOLDING, WETTING, CUTTING IN LENGTH
STACKING THEN TRANSFER TO PACKING MACHINE FOR PACKING FROM RAW MATERIAL TO FINISH PRODUCT ALL THE STEPS ARE FINISHED ON MACHINE
THE PROCESS IS QUICK AND CLEAN
THE FOLDING MACHINE AND PACKING MACHINE CAN BE COMBINE TOGETHER TO BE A FULL AUTOMATIC LINE OR CAN BE SEPARATED WHEN NEEDED THAT CAN MAX USE THE MACHINES AND MAKE MORE OUTPUT
QUANTITY: 1
Learn More -
F-1431 FEATHER FILLING MACHINE MODEL SR-5
REFERENCE NUMBER: F-1431
FEATHER FILLING MACHINE MODEL SR-5
PRODUCT FEATURES
• FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL
• AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY
• FILLING TIME IS 2 TO 5 SECONDS
• NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC
• CE CERTIFICATE
• TYPE : SR-5
• DIMENSION: 1200 x 1500 x 2000MM
• VOLTAGE: 200/380/415V 50/60HZ 3PHASE
• POWER: 1.5 KW
• FILLING RANGE: 0.5 TO 50 GRAMS, DEPENDING ON THE MATERIAL
• AIR PRESSURE: 0.5 TO 0.8MPA
• THE VACUUM FILLING FUNCTION DOES NOT HURT THE MATERIAL AND KEEPS THE ORIGINAL ELASTICITY AND SOFT HAND FEELING.
• THE WHOLE LINE CAN BE HANDLED BY ONLY TWO OPERATORS
• THE AVERAGE FILLING TIME CAN BE 4 TO 10 SECONDS (DEPENDING ON THE ACCURACY) AND THE FILLING TIME CAN BE ADJUSTED.
• Material hopper: 1200 x 900 x 2000mm 1pcs
• Weighing system: 1200 x 600 x 1000mm 1pcs
• Blower: 1 set
• Pipe system: 1 pc
Learn More -
E-9989 PILLOW VACUUM PACKING MACHINEREFERENCE NUMBER: E-9989 PILLOW VACUUM PACKING MACHINE MODEL: 700 DIMENSIONS: 1002 X 730 X 1820mm (40" X 28" X 72") VOLTAGE: AS PER CUSTOMERS REQUIREMENT POWER: 500 WATTS COMPRESSING AREA: 645 X 1000mm (25" X 40") STROKE: 300mm (12") AIR PRESSURE: 0.4-0.8 MPA (60 TO 120 PSI) CAPACITY: 2 PCS/MIN WEIGHT: 330 KG (720 LBS) DESCRIPTION: SUITABLE FOR ALL KINDS OF HOME TEXTILE PACKING WITH PP BAGS, SUCH AS PILLOWS, CUSHIONS AND PLUSH TOYS, SOFA CUSHIONS, ETC. THE SUITABLE BAG MATERIAL CAN BE PP, PE, PA, OPP, ETC. HIGH LEVEL OF AUTOMATION. QUANTITY AVAILABLE: 1 Learn More -
G-6925 ELECTRONIC STUFFING MACHINE FOR PILLOWS AND FURNISHING CUSHIONREFERENCE NUMBER: G-6925 ELECTRONIC STUFFING MACHINE FOR PILLOWS AND FURNISHING CUSHION QUANTITY AVAILABLE: 1 Learn More -
TT-8285 POWER BARGE, 16.2MW EACH (TOTAL 120MW), YEAR 1998, 50HzTT-8285 POWER BARGE, 16.2MW EACH (TOTAL 120MW), YEAR 1998, 50Hz TECHNICAL DETAILS LIKE LENGTH, WIDTH, DEPTH OF THE BARGE: L= 96540mm, B= 30480mm DEPTH = 6090mm YEAR OF BUILT: 1998 SINGLE BARGE: YES Learn More -
YY-3530 COLINES FILM EXTRUSION LINES, CAST FILM, MODEL ALLROLL EX 1500, YEAR 2018YY-3530 COLINES FILM EXTRUSION LINES, CAST FILM, MODEL ALLROLL EX 1500, YEAR 2018 1. MANUFACTURER: COLINES 2. MODEL: ALLROLL EX 1500 3. YEAR: 2018 4. NUMBER OF LAYERS: 5 QUANTITY: 1 Learn More -
T-7979 KMT CONTICRASH TYPE 350E - FOR WOVEN FABRICS, YEAR 2003T-7979 KMT CONTICRASH TYPE 350E - FOR WOVEN FABRICS, YEAR 2003 MAX WIDTH 3500mm OF FABRIC TO BE CRUSHED AND AVERAGE OUTPUT 800-1000 RUNNING METERS OF FABRIS PER HOUR. COMPOSITION: ENTRY – UNWINDER OF 2 ROLLERS STEAM/RESUURE CHAMBER FOR CRUSHING OF STAINLESS STEEL EXIT ON CONVEYOR OVER WHICH AND UNDER ARE COOLING FANS COOLING X 6 FANS OVER AND UNDER EXIT CONVEYOR. TO OBTAIN BETTER CRUSHING EFFECT – THE FABRIC MAY BE PUT 2 OR 3 TIMES INTO MACHINE. MACHINE WAS USED VERY LITTLE. EXCELLENT COMPLETE CONDITION QUANTITY: 1 Learn More -
M-5586 AUTOMATIC MATTRESS FLIP OVER TAPE EDGE MACHINE, NON WALK AROUND , SIT DOWN OPERATORM-5586 AUTOMATIC MATTRESS FLIP OVER TAPE EDGE MACHINE, NON WALK AROUND , SIT DOWN OPERATOR PRODUCTION CAPACITY: MINIMUM: 130 PCS / 8 HR (140mm-190mm) MAXIMUM: 180 PCS / 8 HR (90mm-190mm) QUANTITY: 1 Learn More