Search results for: 'Design Qualit'

R-6855 STA IMPIANTI MILLENNIUM 3 ROASTING MACHINES

THE ROASTING MACHINES SERIES MILLENNIUM 3 REALIZED BY STA IMPIANTI SRL CONFIRM THEMSELVES CAPABLES OF A WORLD LEADING TRADE MARK IN DESIGN AND PROJECTATION OF INDUSTRIAL AUTOMATIC ROASTING MACHINES FOR COFFEE AND OTHER SIMILAR PRODUCTS. THESE MACHINES, ALLOWING HIGHLY INTEGRATED TECHNOLOGICAL SOLUTIONS, ANTICIPATE THE MOST ADVANCED MARKET DEMANDS.
THANKS TO THE CONSTANT PURSUIT OF HIGH QUALITY STANDARD AND THE COMPANY’S DESIRE TO PROVIDE AT THE SAME TIME A PRODUCT TAILORED TO THE NEEDS OF EACH CLIENT COMPANY, STA IMPIANTI SRL IS ABLE TO OFFER THE BEST SOLUTION IN THE MARKET.

THE ROASTING MACHINES SERIES MILLENNIUM 3 ARE GUARANTEE OF THE HIGHEST STANDARDS OF TECHNOLOGY DECLINED

ON CONCEPS OF HIGH PRODUCTION, MAXIMUM PERFORMANCE, RELIABILITY TOTAL SAFETY WITH LOW NOISE AND ENVIRONMENTAL EMISSIONS.

STANDARD EQUIPMENT:

ELECTRIC CONTROL BOARD WITH PLC + TOUCH SCREEN FOR FULL AUTOMATIC OR PARTIAL DRIVE.
AUTOMATIC ROASTING PROCESS WITH RECORDING – STORAGE OF ROASTING PARAMETERS
SYSTEM CONTROL THROUGH PLC + TOUCH SCREEN
FITTINGS FOR PC
ALARM SYSTEM BY BUZZER AND SIGNAL LAMP WITH DISPLAY ANOMALIES.
PRE-HEATING SYSTEM FOR RAW COFFEE IN STAND-BY
TEMPERATURE COFFEE CONTROL BOTH DURING ROASTING AND COOLING CYCLE.
HOT AIR GENERATOR (STA IMPIANTI‘ PATENTED SYSTEM)
“LOW INERTIA” DEVICE FOR IMMEDIATE STARTING OF PRODUCTION
INDUSTRIAL GAS BURNER TYPE MODULATING OR GASOIL BURNER AT MULTI STAGES OF FLAME ACCORDING APPLICATION.
PROCESS AIR ADMITTANCE CONTROL SYSTEM
FITTINGS FOR CLEAN AIR BY AIR EXCHANGER
CONTROL BOARD COMPLETE WITH LIGHTING DEVICE
SCREENER WITH PNEUMATIC DRAWING
WATER PUMP COMPLETE WITH TANK AND SAFETY BY PASS DEVICE
PRE COOLING SYSTEM OVER ROASTING DRUM
PRE COOLING SYSTEM CONNECTED TO THE COOLER
FIRE PREVENTION SYSTEM LINKED TO THE CYCLONE-CHAFFS COLLECTOR.
CYCLONE-CHAFFS COLLECTOR WITH DRIVEN STAR VALVE
CYCLONE FOR COOLER AND DESTONER
SELF CLEANING COOLING TANK
ADDITIONAL EMERGENCY UNLOADING FOR COOLER
INTEGRATED DESTONER
SERVOCONTROL DEVICE FOR REMOTE ADJUSTMENT OF DESTONER
SOUND PROOFING SYSTEM
GLOBAL SAFETY PROTECTION
OPTIONAL EQUIPMENT

COMPUTERIZED AUTOMATIC ROASTING PROCESS CARP MANAGED BY PC AND MONITOR.
CLEAN AIR BY AIR GENERATOR-EXCHANGING SYSTEM
POST COMBUSTOR TYPE THERMAL BURNER OR CATALYTIC
EXTERNAL DRAWING AIR (QUICK FRESH) SYSTEM
DESTONER WEIGHING CELLS
CHAFFS COMPACTOR.
HEATING ADDUCTION SYSTEM:

PATENTED SYSTEM BY STA IMPIANTI SRL SPECIFICALLY STUDIED FOR ROASTING LINE APPLICATIONS. THIS SYSTEM ALLOWS SHORTER AND HOMOGENEOUS ROASTING TIME:

BY CONVECTION HOT AIR FLOWING THROUGH THE COFFEE IN THE DRUM
BY CONDUCTION DUE TO THE HEATED ROASTING DRUM
BY IRRADIANCE FROM THE GRATE LOCATED BETWEEN THE FLAME AND THE ROASTING DRUM (INFRARED RAYS)
HOT AIR GENERATOR:

THREE ARE THE POSSIBILITIES OF SETTLEMENT TO THE OVER INDICATED SYSTEM:

AIR BY AIR EXCHANGING SYSTEM WITH RECOVERY DEVICE (100% CLEAN AIR)
CONVENTIONAL GENERATOR
HEATING GENERATOR WITH PARTIAL OR TOTAL RECYCLE

Learn More

P-5043 PROBAT (P5) ROASTER 5 KILOS YEAR 2009

PROBAT
MODEL: P5
ROASTER
YEAR: 2009
5 KILOS
NICE FULL CONTROL PANEL MOUNTED ON LEFT SIDE
AVERAGE 33 POUNDS PER HOUR. MAXIMUM 10 POUNDS PER BATCH
PROBAT HAS RETURNED TO THEIR CLASSIC, NOSTALGIC DESIGN CONTACT COMPONENTS MADE OF HIGH-QUALITY CAST IRON
SIMULTANEOUS ROASTING AND COOLING HAS JUST BEEN ADDED WITH SUCTION FOR COOLING AND ROASTING EXHAUST AIR
SEPARATE MOTORS FOR DRUM DRIVE, COOLING SIEVE STIRRING ARM AS WELL AS ROASTER AND COOLER FANS – NO MORE BELTS AND CHAINS, A GREAT IMPROVEMENT.
SIMPLIFIED CLEANING BY REMOVABLE LATERAL WALLS
SEPARATE ROASTING CYCLONE FOR AN EFFECTIVE CHAFF ASPIRATION WHICH CAN BE LOCATED IN DIFFERENT LOCATIONS AS NEEDED
CLEAR OPERATION WITH DIGITAL TIME AND TEMPERATURE DISPLAY
EMERGENCY DISCHARGE IN CASE OF POWER OUTAGE USING SUPPLIED CRANK. ADAPTER MAKES POSSIBLE THE USE OF A CORDLESS SCREWDRIVER
OPTIONAL (PROBATONE 5 / PROBATONE 12): PS NASED CONTROL SYSTEM WITH VISUALISATION OF PRODUCT TEMPERATURE CURVE AND RECIPE MEMORY

QUANTITY: 1

Learn More

R-3266 SIROCCO SR 35 ROASTER - 35 KILOS

SEVEN “MACHINES” IN ONE BODY. THAT SAVES YOU PRECIOUS SPACE, EXPENSIVE ENERGY, REDUCES WASTE AND TOTALLY QUIET. WHEN COMPARING, REMEMBER THAT YOU WILL NEVER NEED TO BUY OXIDIZER, AND A AFTERBURNER, SINCE IT IS ALL INCLUDED.
AFTERBURNER
INCINERATOR
CHAFF COLLECTOR
MANUALLY & PROGRAMMED PROFILE CONTROLLER
VARIABLE AIR SPEED CONTROLLER
SEPARATE HEAT CONTROLLER
GAS MODULATING CONTROLLER

COMPLETE ROASTING PROCESS WITH ALL FEATURES BUILT INSIDE ONE MACHINE
GENTLE CAST IRON ROASTING ENVIRONMENT
MECHANICALLY FLUIDIZED BEAN MOVEMENT
INTEGRATED AFTERBURNER AND INCINERATOR
TO ELIMINATE SMOKE, ODOR AND CHAFF
GRAPHICAL TOUCH SCREEN WITH PROFILE MEMORY
OVERSIZED INSPECTION PORTS
STIRFLEX COOLING TRAY
QUICK-RELEASE COOLER WITH REMOVABLE SCREEN
MAINTENANCE FREE SEALED ROASTING DRUM
BUILT-IN STONER BOOT
LOW PROFILE INFEED HOPPER
WEB-ENABLED FOR FACTORY ASSISTANCE AND DIAGNOSTICS
AUTOMATIC OR SEMI-AUTOMATIC OPERATION FOR CONSISTENT BATCHES
CLEAR PROCESS INFORMATION INCLUDES BEAN TEMP., ELAPSED TIME,
TEMPERATURE CHANGE AND STATUS

SPECIFICATIONS:
MODEL #: SR 35
BATCH CAPACITY: 35 KGS
DIMENSIONS: 35" W X 112" L X 84" H
COOLER DIAMETER: 40
HEAT SPECIFICATIONS: GAS & 380K-760K
WEIGHT: 3600 LBS

QUANTITY: 1

Learn More

P-5090 JOPER CAST IRON ROASTER 60 KILOS

ONE BAG ROASTING – WORLDWIDE FAVORITE SINCE MOST OF THE COFFEE BAGS IN THE WORLD ARE 60 KILO. NOW THIS IS NOT AN EXCUSE TO AVOID SILO MANAGEMENT OF THE COFFEE BEANS - AS COFFEE STORED IN SILOS ENJOY A UNIVERSAL MOISTURE CONTENT WHERE LEAVING IT IN BAGS WILL GIVE YOU MOISTURE ALL OVER THE PLACE - SO THINK SILOS AS PART OF YOUR PLANT. NOW TO THE ACTUAL ROASTER BEING A VERY RUGGED CAST IRON ROASTING FRAME AND ROASTING DRUM CONTACT-CLEARANCES WITH THAT SOLID FRAME MAKING IT JUST PLAIN SOLID AND DOES NOT MOVE UNDER LONG OR EXTENDED USE. DOUBLE WALL DRUM MEANS THAT THE HEAT IS ALL DESIGNED TO GO THROUGH THE CENTER OF THE ROASTING CHAMBER, NOT "ONTO" THE DRUM EXTERIOR. TOTAL TRUE CONVECTION. NOT ONLY IS THIS THE SAME STYLE FROM THE OLD GOTHOT & BARTH ROASTER DAYS. . . BUT EVEN BETTER AS THE SHAFT DESIGN SO THAT BEARINGS ARE EXTERNALLY MOUNTED AND ADDITIONALLY ARE AIR COOLED FOR LONG LIFE AND TROUBLE-FREE CONTROL. EVEN THE SIDE PANELS OR PRODUCT FLIGHTS HAVE A LONGER CURVE POSITIONING THAT ALLOWS FOR MORE PRODUCT FLOW INTO THE HOT AIR STREAM, RESULTING IN A SLIGHTLY MORE RAPID ROAST WITH MORE EVEN BEAN INTERIOR AND EXPANSION THAT FRANKLY LEADS THE INDUSTRY.

ALL THIS COMMENTARY ABOVE MEANS THIS ROASTER SIMPLY IS MORE QUIET THAN ANYTHING ON THE MARKET. PERIOD. THERMAL INSULATION WITH HIGHEST QUALITY OF FIBER FOR LOW GAS CONSUMPTION; DIGITAL TEMPERATURE CONTROL. CYCLONE IS SEPARATE. THE COOLER, BEING TOTALLY SEPARATE ALSO HAS THE LARGEST AIR COLLECTION AREA OF ANY ROASTER MADE ALLOWING FOR TOTAL AMBIENT COOL COFFEE IN LESS THAN THREE MINUTES. ADD TO THIS PACKAGE A LOADER OR YOUR CHOICE OF DESTONERS AND EVEN YOUR CHOICE OF CONTROL METHODS. . . SEE BELOW FOR DETAILS. SPECIAL NOTE - THE MORE AUTOMATIC VERSIONS OF THIS ROASTER MEANS THAT EVERYTHING IS TOTALLY DIFFERENT FROM THE BURNER TO THE MOTORS USED TO CONTROL EACH FUNCTION - AS THEY ARE ALL SPEED CONTROLLED - SO THERE IS A HUGE DIFFERENCE BETWEEN THE "MANUAL" METHOD AND THE AUTOMATIC AND PROFILE OPERATED MACHINE.

SPACE PLANNING AND DRAWINGS - WE ARE HAPPY TO DRAW THIS INTO YOUR DRAWINGS, SO THAT YOU CAN SEE SPECIFICALLY JUST WHERE AND HOW THIS WILL FUNCTION WITHIN YOUR PLANT. PLEASE SEND YOUR DRAWINGS FOR A DETAIL STUDY.

BUILT TO UL295 STANDARDS.

QUANTITY: 1

Learn More

S-1166 SEMI-AUTO TIPPING MACHINE, MACHINE DIMENSION 800 X 650 X 900mm

SEMI-AUTO TIPPING MACHINE
IT IS WIDELY USED FOR TIPPING CORDS, SHOELACES, ROPES ETC
IT IS EASY TO PRODUCE DIFFERENT SIZES OF SHOELACE BY CHANGING THE GEAR
ADOPTING FREQUENCY CONTROL
OUR MACHINES POSSESS AUTO-STOP SYSTEM
WRAPPING CENTER YARN FEEDING SYNCHRONOUSLY
AND THAT CAN ACHIEVE LOW WASTE AND HIGH PRODUCTIVITY
WITH HIGH QUALITY WORK AND REASONABLE STRUCTURES
IT RUNS STABLY IN LONG LIFETIME
WITH GOOD DESIGNATION
EASY AND SECURITY OPERATION
THE MAINTENANCE OF IT IS EASY AND CONVENIENT
ADOPTING FREQUENCY CONTROL MOTOR IS EASY TO CONTROL THE SPEED
AND PROTECT THE LOAD
HANGING INDUSTRIAL CERAMIC EYELETS AT THE YARN OFF-TRACK POINT TO INSTEAD PERFORATION WORK AND IT IS EASY TO CHANGE THE BOBBIN
AND ADJUST THE SPRING FOR THE USING OF NEW TYPE SPINDLE
SEMIAUTOMATIC TIPPING MACHINE:
VOLTAGE: 220VAC, SINGLE PHASE, 50HZ, 0.75KW
OUTPUT CAPACITY: 40 PIECES/MIN
MACHINE WEIGHT: 160 KGS
MACHINE DIMENSION: 800 X 650 X 900mm

QUANTITY: 1

Learn More

S-1179 FULL AUTOMATIC TIPPING MACHINE, MACHINE DIMENSION 2900 X 1230 X 1660mm

FULL AUTOMATIC TIPPING MACHINE
IT IS WIDELY USED FOR TIPPING CORDS, SHOELACES, ROPES ETC.
IT IS EASY TO PRODUCE DIFFERENT SIZES OF SHOELACE BY CHANGING THE GEAR
ADOPTING FREQUENCY CONTROL
OUR MACHINES POSSESS AUTO-STOP SYSTEM
WRAPPING CENTER YARN FEEDING SYNCHRONOUSLY
AND THAT CAN ACHIEVE LOW WASTE AND HIGH PRODUCTIVITY
WITH HIGH QUALITY WORK AND REASONABLE STRUCTURES
IT RUNS STABLY IN LONG LIFETIME
WITH GOOD DESIGNATION
EASY AND SECURITY OPERATION
THE MAINTENANCE OF IT IS EASY AND CONVENIENT
ADOPTING FREQUENCY CONTROL MOTOR IS EASY TO CONTROL THE SPEED
AND PROTECT THE LOAD
HANGING INDUSTRIAL CERAMIC EYELETS AT THE YARN OFF-TRACK POINT TO INSTEAD PERFORATION WORK AND IT IS EASY TO CHANGE THE BOBBIN AND ADJUST THE SPRING FOR THE USING OF NEW TYPE SPINDLE
AUTOMATIC TIPPING MACHINE:
VOLTAGE: 220VAC, SINGLE PHASE, 50HZ, 1.5KW
OUTPUT CAPACITY: 15000 PAIRS/8H
MACHINE WEIGHT: 700 KGS
MACHINE DIMENSION: 2900 X 1230 X 1660mm

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-6091
FULLY AUTOMATIC PVC MEDICAL URINE BAG MACHINE

MACHINE FOR PRODUCING DISPOSABLE URINE/URINARY COLLECTING BAG, DRAINAGE BAG, ETC.
PLC CONTROL, COMPUTER TOUCH SCREEN CONTROLLING SYSTEM, WITH PRECISE, EASY OPERATION.

Learn More

REFERENCE NUMBER: X-0008 ELECTRONICALLY CONTROLLED SEMI-AUTOMATIC FILLING FOR PILLOW, CUSHIONS, QUILTS, BABY MATTRESSES AND MORE THIS MACHINE IS A STAND-ALONE AND VERY VERSATILE PILLOW STUFFING AND BAGGING MACHINE. ITS SIMPLE OPERATION ALLOWS TO USE THE SAME EQUIPMENT TO ACCOMPLISH THE TWO PROCESSES: STUFFING A BATT OR A FOAM CORE IN A COVER (OR AN INSERT IN THE FINAL DEC COVER / A PILLOW IN THE FINAL ZIPPERED COVER) AND/OR PUT A FINISHED PILLOW IN A BAG (INDIVIDUAL PE BAG, TWIN-PACK BAG, ZIPPERED VINYL BAG, ETC). THE MACHINE CAN BE LOADED MANUALLY OR WITH A CONVEYOR ON THE REAR PART, WHILE AN OPERATOR IS NEEDED IN THE FRONT: HE PUTS THE COVER/BAG ONTO THE STUFFING BELTS, ACTIVATES THE TENSIONING FORKS WITH THE PEDAL AND HOLDING THE COVER/BAG FACILITATES THE PILLOW STUFFING. POWER SUPPLY IS 400 VOLTS, WILL NEED A TRANSFORMER TO OPERATE ON 480 VOLTS, INQUIRE IF NEEDED Learn More

REFERENCE NUMBER: M-3824 (990UEWIHH8) L FROZEN FRENCH FRIES LINE 500KG/H QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1861 (1313235MKD12RX) SANTEX PRE-TREATMENT AND WASHING MACHINE TYPE ACTIWASH YEAR 2002 DESIGNED FOR LOW-TENSION PRE-TREATMENT OF WOVEN AND KNITTED GOODS MANUFACTURER: SANTEX - SWITZERLAND YEAR OF MANUFACTURE: 2002 WORKING WIDTH: 2200/1800 mm SPEED OF MACHINE: 3-100 M/MIN PRODUCTION SPEED: APPROX. 75 M/MIN THE DAILY OUTPUT WILL DEPEND E.G. ON QUALITY AND WEIGHT OF FABRICS/KNIT GOODS YOU WILL WASH ON THESE MACHINES. SO FAR THE PLANT WAS RUNNING AT AN AVERAGE SPEED OF 40 M/MIN, I.E. 2,400 MTRS PER WORKING HOUR. QUANTITY AVAILABLE: 1 Learn More