Search results for: 'Electrical b'

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

Learn More

K-2919 MAN-BHKW COMPLETE MODULES 500KW YEAR 2009

ELECTRICAL POWER 500 KW
THERM. POWER 400 KW
FUEL: BIO OIL AND DIESEL
YEAR2009
ONLY BETWEEN 6000 AND 9000 HOURS
INCLUDING ELECTRICAL BOXES
HEAT EXCHANGER
CATALYSATORS
11 KV / 50 HZ

QUANTITY: 8

Learn More

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-2073 PAPERPLAST DRY 70/102 YEAR 2007 SIZE 1000 x 1400mm PAPERPLAST TYPE: DRY 70/102 YEAR: 2007 SIZE: 1000 x 1400mm UNWINDING AN AXIS FIXED GROUP RIFLO THE FIL WITH A LATERAL AVVOLGRIFLO AUTOMATIC FEEDER ENTRY SHEETS CALANDRA ACCOMPANYING COOLING UNIT CLOSED CIRCUIT WITH CHILLED ROLLER SEPARATOR AUTOMATIC INDEPENDENT AUTOMATIC STACKER ELECTRICAL CONTROL PANEL ELECTRICAL SYSTEM ON THE MACHINE WITH CABLES FLAME PROOF PLANT TIRE ON THE MACHINE EXTRACTION DEVICE OF THE PRESSURE ROLLER ROLLER WHEEL SPARE BEARINGS IN PRODUCTION QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-5175 AUTOMATIC PILLOW MACHINE WITH HOPPER FEED DIMENSIONS: 11700mm X 4000mm X 3000mm POWER: 23.45KW CAPACITY: 8 TO 10 PIECES PER MINUTE LABOR NEED: 1 CONTROL SYSTEM: SIEMENS PLC ELECTRICITY: AS PER CUSTOMER FIBER OPENING RATE: 98%+ WEIGHT: 3650 KG QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-4249 CHICKEN SLAUGHTERING LINE 1500 PER HOUR QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: E-9901 AUTOMATIC COMPUTERIZED PILLOW FILLING LINE FILLING HEAD IS CONTROLLED BY A PLC MODEL: CF FLOORSPACE REQUIRED: 9000 X 5000 X 2100mm (29.5 FEET X 16.4 FEET X 82 INCHES) QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-9456-B FOAM BUN COMPRESSION AND PACKAGING MACHINE 10 METERS LONG TO COMPRESS FOAM 48" X 48" X 30" HIGH FLOORSPACE DIMENSIONS (LENGTH X WIDTH X HEIGHT): 5000mm X 1600mm X 3800mm MACHINE WEIGHT: 4000KG TABLE DIMENSIONS: 1150mm X 1350mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5167 (1212595FG11RC)
SULZER P7300 RR PROJECTILE WEAVING LOOMS

MAKE: SULZER
MODEL: P7300 RR
WORKING WIDTH : 390mm
YEAR: 2004

ACCESSORIES WITH ALL 6 LOOMS
BIG LOT OF SPARE PARTS INCLUDE MECHANICAL SPARES AND ELECTRICAL CARDS  

QUANTITY AVAILABLE: 6

Learn More

REFERENCE NUMBER: M-1530 (660EUSJXX5) DILO DI-LOOP YEAR 1995 WIDTH 5500mm DILO STRUCTURING NEEDLE LOOM MAKE: DILO TYPE: DI-LOOP VS 55 WORKING WIDTH: 5.500mm Y.O.C.: 1995 QUANTITY AVAILABLE: 1 Learn More