Search results for: 'Electrical ca'

TT-5852 MASCOTT PLUS 25-30 CROSSLAPPER AND MONO_1AB_27-3000 NEEDLE LOOM

Compare

TT-5852 MASCOTT PLUS 25-30 CROSSLAPPER AND MONO_1AB_27-3000 NEEDLE LOOM Learn More

A-1876 END OF LINE UNIT T4.0 FOR NEEDLEPUNCHED PRODUCTS – 4000mm

Compare

REFERENCE NUMBER: A-1876
END OF LINE UNIT T4.0 FOR NEEDLEPUNCHED PRODUCTS – 4000mm

PRODUCT TO BE PROCESSED: NEEDLEPUNCHED NONWOVENS
PRODUCT WIDTH: 4.000 MM

WORKING SPEED: 1 – 20 M/MIN

QUANTITY: 1

Learn More

J-1563 COFFEE, SYRUP, LABELERS, CARTONERS AND SIMILAR EQUIPMENT

Compare

COFFEE, SYRUP, LABELERS, CARTONERS AND SIMILAR EQUIPMENT

Learn More

T-9753 BRUNO MODEL FH250-T TOGGLE DIE CUTTING PRESS BELT-FEED FOR SHEET AND ROLLED MATERIALS, 78” X 54”, 250 TON-YEAR 2003

Compare

T-9753 BRUNO MODEL FH250-T TOGGLE DIE CUTTING PRESS BELT-FEED FOR SHEET AND ROLLED MATERIALS, 78” X 54”, 250 TON-YEAR 2003 78” X 54” BRUNO FH 250-T YEAR: 2003 QUANTITY: 1 Learn More

T-2034 SIEMENS ELECTRICAL GEAR, 480 VOLT

Compare

SIEMENS LOW VOLTAGE EQUIPMENT:
SIEMENS TYPE WL LOW VOLTAGE SWITCHGEAR
5000 AMP MAIN BUS, 3 PHASES-3 WIRES, 480 VOLT, 50/60HZ, 100KA INTERRUPTING CAPACITY
SINGLE ENDED SOURCE OR DOUBLE ENDED SOURCE SUBSTATIONS AVAILABLE.
5000A AND 1600A SIEMENS TYPE WL CIRCUIT BREAKERS, MECHANICALLY OPERATED, ELECTRICALLY OPERATED, AND ADJUSTABLE TRIP SETTINGS.

SWITCHGEAR FEATURES:
-MODBUS (RS-485) COMMUNICATIONS TO POWER METER AND BREAKERS.
-SIEMENS 9610 DIGITAL POWER METER
-PROTECTIVE RELAYS, BASLER BE1-87T TRANSFORMER DIFFERENTIAL (ANSI 87T FUNCTION), BASLER BE1-47N PHASE SEQUENCE, UNDER VOLTAGE, OVER VOLTAGE (ANSI 47, 27, & 59 FUNCTION), BASLER BE1-50 TIMED OVERCURRENT / INSTANTANEOUS (ANSI 50 /51 FUNCTION), BASLER BE1-25 SYNC CHECK (ANSI 25 FUNCTION)
-SIEMENS TVSS TRANSIENT VOLTAGE SURGE SUPPRESSOR
-ARC FLASH SAFETY PROVISIONS FOR “CLOSED DOOR REMOTE RACKING MOTOR” (LIMITED RACKING MOTORS AVAILABLE)
-MIMIC BUS ON FRONT OF SWITCHGEAR
-TEST PLUGS FOR MAINTENANCE TESTING OF COMPONENTS
-INFRASCAN PORTS IN REAR OF SWITCHGEAR
-SIEMENS SWITCHGEAR AND BREAKERS ARE CURRENTLY IN PRODUCTION SO SPARE PARTS AND UPGRADES ARE READILY AVAILABLE.

SIEMENS LOW VOLTAGE EQUIPMENT INVENTORY:
AF= AMP FRAME, AT= AMP TRIP, M.O.= MECHANICALLY OPERATED, E.O.= ELECTRICALLY OPERATED.
ITEM 001
MANUFACTURER: SIEMENS
CURRENT RATING: 5000 AMP
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 100 KA
TIE BREAKER: QTY 0 NONE
SECTIONS: 4
TYPE: WL LV SWITCHGEAR
VOLTAGE RATING: 480 VOLT
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 5000 AF/AT M.O.& E.O
FEEDER BREAKERS: QTY 10 1600 AF / 1200AT M.O.& E.O.
FUTURE PROVISIONS: 2

ITEM 002
MANUFACTURER: SIEMENS
CURRENT RATING: 3200 AMP
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 100 KA
TIE BREAKER: QTY 0 NONE
SECTIONS: 6
TYPE: WL LV SWITCHGEAR
VOLTAGE RATING: 480 VOLT
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3200 AF/AT M.O.& E.O
FEEDER BREAKERS: QTY 14 (9)1600 AF / 1200AT (5)1600 AF / 800AT M.O.& E.O.
FUTURE PROVISIONS: 6

ITEM 003
MANUFACTURER: SIEMENS
CURRENT RATING: 5000 AMP
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 100 KA
TIE BREAKER: QTY 1 5000 AF/AT M.O.& E.O
SECTIONS: 5
TYPE: WL LV SWITCHGEAR
VOLTAGE RATING: 480 VOLT
HERTZ: 50 / 60
MAIN BREAKER: QTY 2 5000 AF/AT M.O.& E.O
FEEDER BREAKERS: QTY 1600 AF / 1200AT M.O.& E.O.

4160 VOLTAGE SWITCH GEAR
SIEMENS MEDIUM VOLTAGE SWITCHGEAR:
SIEMENS TYPE GMSG MEDIUM VOLTAGE SWITCHGEAR
2000 AMP MAIN BUS, 4760 VOLT, 50/60HZ, 63KA INTERRUPTING CAPACITY
SINGLE ENDED SOURCE OR DOUBLE ENDED SOURCE SUBSTATIONS AVAILABLE.
3000A, 2000A AND 1200A SIEMENS TYPE GMSG CIRCUIT BREAKERS, MECHANICALLY OPERATED, ELECTRICALLY OPERATED, WITH ADJUSTABLE SOLID STATE PROTECTIVE RELAYS.

SWITCHGEAR FEATURES:
-FIBER-OPTIC AND MODBUS (RS-485) COMMUNICATIONS TO POWER METER AND RELAYS.
-SIEMENS 9610 DIGITAL POWER METER
-PROTECTIVE RELAYS, BASLER BE1-87T TRANSFORMER DIFFERENTIAL (ANSI 87T FUNCTION), BASLER BE1-87B BUS DIFFERENTIAL (ANSI 87B FUNCTION), SIEMENS TYPE 7SJ6215 TOC AND INSTANTANEOUS (ANSI 50 /51 FUNCTION), ABB CIRCUIT SHIELD SYNC CHECK (ANSI 25 FUNCTION).
-LINE VT’S AND BUS VT’S
-CONTROL POWER TRANSFORMER
-ARC FLASH SAFETY PROVISIONS FOR “CLOSED DOOR REMOTE RACKING MOTOR”, RECEPTACLES FOR REMOTE RACKING AND REMOTE OPERATION OF BREAKERS.
-MIMIC BUS ON FRONT OF SWITCHGEAR.
-TEST PLUGS FOR MAINTENANCE TESTING OF COMPONENTS.
-INFRASCAN PORTS IN REAR OF SWITCHGEAR
-SIEMENS SWITCHGEAR AND BREAKERS ARE CURRENTLY IN PRODUCTION SO SPARE PARTS AND UPGRADES ARE READILY AVAILABLE.

11 SECTIONS:
SIEMENS MEDIUM VOLTAGE SWITCHGEAR INVENTORY:
AF= AMP FRAME, M.O.= MECHANICALLY OPERATED, E.O.= ELECTRICALLY OPERATED.
ITEM 004
MANUFACTURER: SIEMENS
CURRENT RATING: 2000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (6) 1 THRU 6
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 2000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 8 (2)2000AF (6)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 005
MANUFACTURER: SIEMENS
CURRENT RATING: 2000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (6) 1 THRU 6
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 2000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 8 (2)2000AF (6)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 006
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 1 3000AF M.O. & E.O.
SECTIONS: (5) 11 THRU 15
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 0 NONE
FEEDER BREAKERS: QTY 5 (5)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 0

ITEM 007
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (5) 16 THRU 20
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 8 (2)2000AF (6)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 008
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 1 3000AF M.O. & E.O.
SECTIONS: (5) 11 THRU 15
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 5 (5)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 009
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 1 3000AF M.O. & E.O.
SECTIONS: (5) 6 THRU 10
LINE VT’S: 0
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 5 (4)1200AF (1) 2000AF M.O.& E.O.
CPT: 0
BUS VT’S: 1 (3 PHASES)

ITEM 010
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (5) 1 THRU 5
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 7 (7)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 011
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (5) 16 THRU 20
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 7 (7)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 012
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (5) 1 THRU 5
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 7 (7)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

ITEM 013
MANUFACTURER: SIEMENS
CURRENT RATING: 3000A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 1 3000 AF, M.O.& E.O
SECTIONS: (5) 6 THRU 10
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 3000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 4 (4)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES) USED

ITEM 014
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (4) 1 THRU 4
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 4.76 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
FEEDER BREAKERS: QTY 3 (3)1200AF M.O.& E.O.
CPT: 1
BUS VT’S: 1 (3 PHASES)

4160 SIEMENS MEDIUM VOLTAGE MCC EQUIPMENT INVENTORY:
SIEMENS 81000 SERIES MEDIUM VOLTAGE MCC STARTERS AND CUBICLES:
SIEMENS TYPE 81000 MEDIUM VOLTAGE STARTERS AND MV-MCC
1200 AMP MAIN BUS, 4160 VOLT, 60HZ, 50KA INTERRUPTING CAPACITY, 3 PHASES, NEMA 1
SINGLE ENDED SOURCE OR DOUBLE ENDED SOURCE MV-MCC AVAILABLE.
1200A TYPE 81000 SERIES STARTERS, ELECTRICALLY OPERATED, WITH ADJUSTABLE SOLID STATE PROTECTIVE RELAYS.

MV-MCC AND STARTER FEATURES:
-FIBER-OPTIC AND MODBUS (RS-485) COMMUNICATIONS TO RELAYS.
-PROTECTIVE RELAYS, SIEMENS TYPE 7SJ6215 TOC AND INSTANTANEOUS (ANSI 50 /51 FUNCTION), GENERAL ELECTRIC MULTILIN M60 MOTOR PROTECTION RELAYS.
-BUS VT’S
-CONTROL POWER TRANSFORMER
-MIMIC BUS ON FRONT OF SWITCHGEAR.
-INFRASCAN PORTS IN REAR OF SWITCHGEAR
-SIEMENS MV-MCC AND STARTERS ARE CURRENTLY IN PRODUCTION SO SPARE PARTS AND UPGRADES ARE READILY AVAILABLE.
-DRAW-OUT VACUUM TECHNOLOGY CONTROLLERS
-LOAD BREAK ISOLATION SWITCHES.
37 SECTIONS:

ITEM 015
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 150A/5A

ITEM 016
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 150A/5A

ITEM 017
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 018
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 019
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 020
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 021
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 022
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 023
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 024
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 025
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (1) SIEMENS 7SJ6215 (7) G.E. MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 8-May
CURRENT TRANSFORMERS: (8) SETS 150A/5A

ITEM 026
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: ( (6) G.E. MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4/6
CURRENT TRANSFORMERS: (6) SETS 150A/5A

ITEM 027
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (1) SIEMENS 7SJ6215 (7) G.E. MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 5/8
CURRENT TRANSFORMERS: (6) SETS 150A/5A (2) SETS 75A / 5A

ITEM 028
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (8) G.E. MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 5/8
CURRENT TRANSFORMERS: (4) SETS 150A/5A (4) SETS 75A / 5A

ITEM 029
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 030
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 031
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 032
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 033
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 034
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 035
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 036
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 037
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 038
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 039
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 040
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 041
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 042
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 043
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 044
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 045
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (6) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (6) SETS 200A/5A

ITEM 046
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (4) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 3 / 4
CURRENT TRANSFORMERS: (4) SETS 200A/5A

ITEM 047
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (4) SIEMENS 7SJ6215
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 3 / 4
CURRENT TRANSFORMERS: (4) SETS 200A/5A

ITEM 048
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES
MOTOR PROT. RELAYS: (2) SIEMENS 7SJ6215 (4) GE MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 4 / 6
CURRENT TRANSFORMERS: (4) SETS 75A/5A (2) SETS 150A/5A

ITEM 049
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES (2)
MOTOR PROT. RELAYS: (2) SIEMENS 7SJ6215 (4) GE MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 5 / 6
CURRENT TRANSFORMERS: (2) SETS 75A/5A (4) SETS 150A/5A

ITEM 050
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES (2)
MOTOR PROT. RELAYS: (1) SIEMENS 7SJ6215 (5) GE MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 5 / 6
CURRENT TRANSFORMERS: (2) SETS 75A/5A (4) SETS 150A/5A

ITEM 051
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
PRIMARY DISC. SWITCH: YES (2)
MOTOR PROT. RELAYS: (2) SIEMENS 7SJ6215 (4) GE MULTILIN M60
TYPE: 81000 SERIES
VOLTAGE RATING: 4.16KV
HERTZ: 60HZ
SECTIONS / FEEDERS: 5 / 6
CURRENT TRANSFORMERS: (6) SETS 150A/5A

SIEMENS 15KV MEDIUM VOLTAGE SWITCHGEAR INVENTORY:
SIEMENS 15KV MEDIUM VOLTAGE SWITCHGEAR:
SIEMENS TYPE 15KV GMSG MEDIUM VOLTAGE SWITCHGEAR
1200 AMP MAIN BUS, 15,000 VOLT, 50/60HZ, 63KA INTERRUPTING CAPACITY
SINGLE ENDED SOURCE SUBSTATION AVAILABLE.
1200A SIEMENS TYPE GMSG CIRCUIT BREAKERS, MECHANICALLY OPERATED, ELECTRICALLY OPERATED, WITH ADJUSTABLE SOLID STATE PROTECTIVE RELAY.

SWITCHGEAR FEATURES:
-FIBER-OPTIC AND MODBUS (RS-485) COMMUNICATIONS TO RELAY.
-SIEMENS 9610 DIGITAL POWER METER
-SIEMENS TYPE 7SJ6215 TOC AND INSTANTANEOUS (ANSI 50 /51 FUNCTION
-LINE VT’S
-INFRASCAN PORTS IN REAR OF SWITCHGEAR
-SIEMENS SWITCHGEAR AND BREAKERS ARE CURRENTLY IN PRODUCTION SO SPARE PARTS AND UPGRADES ARE READILY AVAILABLE.

AF= AMP FRAME, M.O.= MECHANICALLY OPERATED, E.O.= ELECTRICALLY OPERATED.
ITEM 052
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASESS, 3 WIRES
INTERRUPTING RATING: 63 KAIC
TIE BREAKER: QTY 0 NONE
SECTIONS: (1) 1
LINE VT’S: 1 (3 PHASES)
TYPE: GMSG
VOLTAGE RATING: 15 KV
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 2000 AF, M.O.& E.O
FEEDER BREAKERS: QTY 0 NONE
CPT: 0
BUS VT’S: 0

SIEMENS 38KV MEDIUM VOLTAGE SWITCHGEAR:
SIEMENS TYPE 38KV MEDIUM VOLTAGE SWITCHGEAR
1200 AMP MAIN BUS, 38,000 VOLT, 50/60HZ, 40KA INTERRUPTING CAPACITY
SINGLE ENDED SOURCE SUBSTATIONS AVAILABLE.
SIEMENS TYPE 38KV 3AH3 CIRCUIT BREAKERS, MECHANICALLY OPERATED, ELECTRICALLY OPERATED, WITH ADJUSTABLE SOLID STATE PROTECTIVE RELAYS.

SWITCHGEAR FEATURES:
-FIBER-OPTIC AND MODBUS (RS-485) COMMUNICATIONS TO PROTECTIVE RELAYS.
-PROTECTIVE RELAYS, SIEMENS TYPE 7SJ6215 TOC AND INSTANTANEOUS (ANSI 50 /51 FUNCTION)
-EXTERNAL CONTROL POWER TERMINALS.
-INFRASCAN PORTS IN REAR OF SWITCHGEAR
-SIEMENS SWITCHGEAR AND BREAKERS ARE CURRENTLY IN PRODUCTION SO SPARE PARTS AND UPGRADES ARE READILY AVAILABLE.
-38KV TYPE 3AH3 VACUUM BREAKERS, 1200A.

SIEMENS 38KV 3AH3 MEDIUM VOLTAGE SWITCHGEAR INVENTORY:
AF= AMP FRAME, M.O.= MECHANICALLY OPERATED, E.O.= ELECTRICALLY OPERATED.
ITEM 053
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 054
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 055
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 056
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 057
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 058
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 059
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 060
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 061
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 062
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 063
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 064
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 065
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 066
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 067
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 068
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 069
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 070
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 1 1200 AF, M.O.& E.O
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 2

ITEM 071
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

ITEM 072
MANUFACTURER: SIEMENS
CURRENT RATING: 1200A
CONFIGURATION: 3 PHASES, 3 WIRES
INTERRUPTING RATING: 40 KAIC
FEEDER BREAKER: QTY 0 NONE
TYPE: 38KV 3AH3
VOLTAGE RATING: 38,000
HERTZ: 50 / 60
MAIN BREAKER: QTY 1 1200 AF, M.O.& E.O
SECTIONS: 1

TRANSFORMERS
ABB LIQUID FILLED TRANSFORMERS:
ITEM 073
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.32%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 08 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 074
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.30%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 08 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 075
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.28%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 10 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 076
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.20%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 09 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 077
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.34%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 09 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 078
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.48%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 06 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 079
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.47%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 06 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 080
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.25%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 10 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 081
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.34%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 09 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 082
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.29%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 10 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 083
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.22%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 09 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 084
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 480Y-277
IMPEDANCE: 7.32%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 10 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 3000 / 3360
B.I.L. HV / LV: 200KV / 30KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 21066 LBS.

ITEM 085
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 4160Y-2402
IMPEDANCE: 11.11%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 08 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 12000 / 13440
B.I.L. HV / LV: 200KV / 60KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 65852 LBS.

ITEM 086
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 4160Y-2402
IMPEDANCE: 11.18%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 08 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 12000 / 13440
B.I.L. HV / LV: 200KV / 60KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 65852 LBS.

ITEM 087
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 4160Y-2402
IMPEDANCE: 11.56%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 10 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 12000 / 13440
B.I.L. HV / LV: 200KV / 60KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 65852 LBS.

ITEM 088
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 4160Y-2402
IMPEDANCE: 11.54%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 09 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 12000 / 13440
B.I.L. HV / LV: 200KV / 60KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 65852 LBS.

ITEM 089
MANUFACTURER: ABB
TYPE: 3 PHASES
CLASS: KNAN / KNAF
VOLTAGES HV / LV: 33640 / 4160Y-2402
IMPEDANCE: 11.56%
TAP CHANGER: 5 POSITION, NO LOAD
FANS: YES
DATE OF MANUFACTURE: 10 / 2010
CONFIGURATION: DELTA-WYE (DYN1)
INSULATION FLUID: SILICONE
KVA RATING: 12000 / 13440
B.I.L. HV / LV: 200KV / 60KV
FREQUENCY: 60HZ
INSTRUCTION BOOK #: PC-1002
TOTAL WEIGHT: 65852 LBS.

SIEMENS MV GROUND AND TEST DEVICES:
GMSG GROUND AND TEST DEVICES (SWITCHGEAR ACCESSORIES) SHOULD BE SOLD AS A SAFETY UPGRADE.
ITEM 090
MANUFACTURER: SIEMENS
RATED CURRENT: 1200A, 2000A, & 3000A
FREQUENCY: 50 HZ / 60HZ
OP. DUTY CYCLE: NOT LISTED
MAIN CONTACTS: VACUUM INTERRUPTER
CLOSE COIL: 125 VDC RANGE100-140
QUANTITY OF STYLE: (1) UPPER CUBICLE (1) LOWER CUBICLE
TYPE: GMSG-EO TYPE B
RATED VOLTAGE: 15 KV
RATED SHORT CIRCUIT: 63KA
INSTRUCTION BOOK#: E50001-U229-A408-X-US00
CHARGING MOTOR: 125 VDC RANGE100-140
TRIP COIL: 125 VDC RANGE70-140

EMAIL US FOR PRICE & PICTURES
INCLUDE OUR REFERENCE NUMBER

Learn More

M-5300 UNDER PAD PRODUCTION LINE

Compare

REFERENCE NUMBER: M-5300 (131342BVGT12UF) L UNDER PAD PRODUCTION LINE UNDER PAD PRODUCTION LINE MODEL: 100CD PRODUCTS TO BE PRODUCED: 3 SIZES OF DISPOSABLE UNDER PAD (SIZE: 600x900mm, 600x600mm, 600x400mm) MECHANICAL DRIVING SYSTEM WITH INVERTER CONTROL PRODUCT STRUCTURE: FLUFF +SAP; TOP TISSUE; BOTTOM TISSUE; TOP SHEET; BACK SHEET QUANTITY AVAILABLE: 1 Learn More

G-0784 RIETER FDY EXTRUSION EQUIPMENT FOR POLYPROPYLENE YEAR 1996/98

Compare

REFERENCE NUMBER: G-0784

RIETER FDY EXTRUSION EQUIPMENT FOR POLYPROPYLENE YEAR 1996/98

1. Machine m26/39:

Year 1996

For 1 fdy spinning line with 2+4 positions, each position with 4 ends

Product: fdy-yarn on bobbins

Raw material: pp, dried filament grade chips

Yarn count range: 150 – 400 dtex

Winder speed for target: 4000 m/min

Machine technical data:

Position gauge: 800 mm

Spinning pump capacity: 4x10 ccm/rev

Spinneret size diameter: 95 mm

Quench width: 670 mm

Quench length: 1700 mm

Number of spin-finish pumps per position: 1

Capacity of spin-finish pump: 4x0.05 ccm/rev

Number of winders/position: 1

Type of winder: riemat a6-094

Number of packages/winder: 4

Maximum package diameter: 420 mm

Package stroke: 190 mm

Package weight at 280 mm package diameter: approx. 6.2 kg

Detailed technical specifications:

Extruder for 4 positions Year 1998:

1 extruder type e1. 105-30m:

-nominal extruder capacity: max 275 kg/h for pp

-operational extruder capacity: max 248 kg/h for pp

-screw diameter: 105 mm

-l/d ratio: 30

-barrel with:

electrical ceramic heaters

7 heating zones, each zone equipped with one 2xpt100

heating zone capacity approx. 58 kw

inlet zone, water cooled

nozzle for nitrogen purge

insulation

-screw with torpedo mixing head

-reduction gear, including belt transmission to motor

-dc motor, rated power approx. 95kw

-extruder frame

1 extruder measuring head, dowtherm vapour heated

-measuring head comprising:

coarse filter

insulation

-double pt100, one each for melt and dowtherm vapour temperature

-pressure sensors for melt pressure, one in front and one behind the coarse filter

1 melt distribution system, dowtherm vapour heated

-melt distribution system comprising

main product pipe between extruder, measuring head and melt distributor.

Extruder for 2 positions Year 1998:

1 extruder type e1. 60-30

-nominal extruder capacity: max 275 kg/h for pp

-operational extruder capacity: max 248 kg/h for pp

-screw diameter: 60 mm

-l/d ratio: 30

-barrel with

electrical ceramic heaters

6 heating zones, each zone equipped with one 2xpt100

heating zone capacity approx. 17 kw

inlet zone, water cooled

insulation

-screw nitrited with maddock mixing head

-reduction gear, including belt transmission to motor

-dc motor, rated power approx. 22kw

-extruder frame

1 extruder measuring head, electrically heated year 1998

-measuring head comprising:

insulation

Double pt100, one each for melt and dowtherm vapour temperature

pressure sensors for melt pressure

burst disc for power switch-off at overpressure.

1 melt distribution system, dowtherm vapour heated

-melt distribution system comprising

main product pipe between extruder, measuring head and melt distributor.

1 riebeam bottom loading spinning beam year 1998

-beam comprising:

welded-in pump blocks with bolted pump adapter plate

silumin insulation blocks

melt distribution pipes with polished inner surfaces

efficient vapour heating on all sides of spin pumps

optimized heat condustion to the spinnerets

1 freezing valve upstream of each spinpump

2 pressure sensors for measuring the melt pressure in front and behind the spinpump

(2 per line)

heating box, completely insulated

heating by dowtherm vapour

1 double pt100 for measuring and controlling the heating box temperature

Designed as follows:

-bottom loading of rieter quickfit spinpacks

-design temperature 320°c

-maximum allowable working pressure: 300 bar for melt pipe and 2.57 bar for jacket

Dowtherm evaporator and components for heating system:

-electrically heated, total capacity approx 25 kw

-shut-off valves

-drainage valves

-dry protection sensor

-magnetic controlled level gauge

- vent system on top of measuring head.

Poy spin packs, type rieter quickfit:

-max pressure in the spinpack: 350 bar

-design temperature: 320 °c

-spinneret outside dimensions: 95 mm

-bottom loading design

-bayonet locking, insert and tighten by turning 90°

-self sealing system

-sand or metal powder filtration, 3 cm filling depth

-wire mesh filters

Spin pumps with motors and gears:

Gear pumps, 4-fold

Capacity 4 x 6 ccm/rev

Each spin pump system comprising

Individual drive motor with flange connection to the reduction gear

Hollow gear shaft for installation of spin pump shaft

Shaft with shear pin protection

Reduction ratio 1:80

Pump speed: 8-30 rev/min

Motor type: synchronous ac-motor

Rated power: 500w at 50 cps

Quench air cabinets bsk 670/1700:

Each cabinet comprising:

-rigid cabinet made from welded sheet metal, painted, side walls made from alu sheet metal

-air rectifier consisting of different layers of perforated metal sheets, rectifiers removable to the front for cleaning.

-1 perforated hinged door

-air inlet duct flanged with counter flange, comprising air flow regulating flaps

-interfloor filament duct, length 2000 mm

-alu chutes for start-up

-nozzles for connection of differential pressure gauge.

Spinning vapour exhausts:

-exhaust hood per spinning position for removal of spinning vapour

-hood designed as follows:

made from stainless steel

air flow regulation flap

hood removable for cleaning

Take-up frames, type riedraw 1:

Welded steel frame, housing all drawrolls, compressed air supply pipes for the aspirator units and the yarn waste pipes within the fdy take-up unit.

Per position:

4 inlet yarn guides

4 spin finish application nozzles

1 yarn cutter / aspirator unit

1 spin finish pump

4 centring yarn guides

4 intermingling units

rolls as described further

1 automatic winder riemat a6-094

Drawrolls year 1998:

Mono 1 with 1 rievap 32 dual shell drawroll, type j7/32-40, ot40

Speed range: 750 to 4000 mpm

Roll diameter: 190 mm

Working width: 250 mm

Temperature range: 45-250°c

And 1 bearing separator roll, type srd60 hard chromium plated

Duo 1 with 2 rievap 32 dual shell drawroll, type j7/32-60, ot40

Speedrange: 1000 to 6000 mpm

Roll diameter: 190 mm

Working width: 250 mm

Temperature range: 45-250°c

Duo 2 with 2 rievap 32 dual shell drawroll, type j7/32-60, ot40

Speedrange: 1000 to 6000 mpm

Roll diameter: 190 mm

Working width: 250 mm

Temperature range: 45-250°c

Duo 3 with 2 cold draw roll units each type j7/45-55

Speedrange: 1800 to 5500 mpm

Roll diameter: 150 mm

Working width: 180 mm

Automatic and wasteless winder riemat a6-094

Spindle driven

Number of ends per winder: 4 ends

Yarn count range: 15 to 1000 dtex

Take up speed: 2500 to 5500 m/min

Chuck length: 900 mm

190 mm stroke, 420 mm outside package diameter

Package volume: 24.7 dm³

Tube bore: 94 ±0.2 mm

Tube outside diameter: 106 ±0.4 mm

Tube length: 225 ±0.5 mm

Oil-mist lubrication unit:

Compressed air distribution station

Mobile aspirator guns with hoses

Electrical control equipment

-for electrical power

general: 3 x 380v/50hz plus ground wire

euro-standard: 3x400v 50 or 60hz plus ground wire

maximum voltage variation ±10% measured at terminals of cabinets

maximum frequency variation: ±2%

Process control system (cif):

fully integrated control system to control and monitor the entire spinning line.

the central monitoring unit si linked to the plc of the spinning section and the plcs of each spinning position.

Drive and heater control year 1998:

Spinning section:

Speed adjustment for the extruder motor is done via a dc-convertor

To achieve a constant pressure at the extruder outlet, the output of the pressure controller is transmitted to the dc-converter to adjust the extruder speed.

The feedback of the actual extruder speed is done by a tacho generator mounted on the extruder motor.

One common frequency inverter supplies the synchronous ac motors for the spin pumps.

According to process conditions, the plc transmits the setpoint to the inverter.

All motors are equipped with an overload protection.

Solid state relays heat each extruder zone and spinning beam.

Each extruder zone and the spinning beam represent an independent control loop.

Take-up section:

The inverter unit is a processor-controlled static frequency inverter for powering the 3-phase motors.

All inverter units in a position cabinet are supplied with approx 570v dc from a common rectifier.

Heating system:

The heating unit rhu is processor-controlled.

The power supply is taken straight from 3-phase 380/400v which powers the cabinet.

The inductor is fitted inside the draw roll.

The rhu switches the current on and off in this inductor. While current flows, a voltage is inducted into the

Rotating draw roll.

This sets up a short-circuit current in the draw roll, thereby heating the roll unit.

2. Machines m27/ 28 / 30 year 1998:

For 3 fdy spinning lines each with 2 positions, and each position with 4 ends

Product: fdy-yarn on bobbins

Raw material: pp, dried filament grade chips

Yarn count range: 150 – 400 dtex

Winder speed for target: 4000 m/min

Machine technical data:

Position gauge: 1000 mm

Spinning pump capacity: 4x7.5 ccm/rev

Spinneret size diameter: 95 mm

Quench width: 470 mm

Quench length: 1200 mm

Number of spin-finish pumps per position: 2

Capacity of spin-finish pump: 4x0.16 ccm/rev + 4x0,05 ccm/rev

Number of winders/position: 1

Type of winder: riemat a6-094

Number of packages/winder: 4

Maximum package diameter: 420 mm

Package stroke: 190 mm

Package weight at 280 mm package diameter: approx. 6.2 kg

Detailed technical specifications:

1 extruder type e1. 60-30m

-nominal extruder capacity: max 80 kg/h for pp

-screw diameter: 65 mm

-l/d ratio: 30

-barrel with:

electrical ceramic heaters

7 heating zones, each zone equipped with one 2xpt100

heating zone capacity approx. 22 kw

inlet zone, water cooled

nozzle for nitrogen purge

insulation

-screw with torpedo mixing head

-reduction gear, including belt transmission to motor

-dc motor, rated power approx. 22kw

-extruder frame

1 extruder measuring head, electrically heated:

-measuring head comprising:

coarse filter

insulation

-double pt100, one each for melt and dowtherm vapour temperature

-pressure sensors for melt pressure, one in front and one behind the coarse filter

1 melt distribution system, dowtherm vapour heated:

Melt distribution system comprising:

main product pipe between extruder, measuring head and melt distributor.

1 riebeam bottom loading spinning beam:

-beam comprising:

welded-in pump blocks with bolted pump adapter plate

silumin insulation blocks

melt distribution pipes with polished inner surfaces

efficient vapour heating on all sides of spin pumps

optimized heat condustion to the spinnerets

1 freezing valve upstream of each spinpump

2 pressure sensors for measuring the melt pressure in front and behind the spinpump

(2 per line)

heating box, completely insulated

heating by dowtherm vapour

1 double pt100 for measuring and controlling the heating box temperature

Designed as follows:

-bottom loading of rieter quickfit spinpacks

-design temperature 320°c

-maximum allowable working pressure: 300 bar for melt pipe and 2.57 bar for jacket

Dowtherm evaporator and components for heating system:

-electrically heated, total capacity approx 18 kw

-shut-off valves

-drainage valves

-dry protection sensor

-magnetic controlled

-level gauge

-vent system on top of measuring head.

Poy spin packs, type rieter quickfit:

Max pressure in the spinpack: 350 bar

Design temperature: 320 °c

Spinneret outside dimensions: 95 mm

Bottom loading design

Bayonet locking, insert and tighten by turning 90°

Self sealing system

Sand or metal powder filtration, 3 cm filling depth

Wire mesh filters

Spin pumps with motors and gears:

Gear pumps, 4-fold

Capacity 4 x 7.5 ccm/rev

Each spin pump system comprising

individual drive motor with flange connection to the reduction gear

hollow gear shaft for installation of spin pump shaft

shaft with shear pin protection

reduction ratio: 1:80

pump speed: 8-30 rev/min

motor type: synchronous ac-motor

rated power: 500w at 50 cps

Quench air cabinets bsk 470/1200

Each cabinet comprising:

-rigid cabinet made from welded sheet metal, painted, side walls made from alu sheet metal

-air rectifier consisting of different layers of perforated metal sheets, rectifiers removable to the front for cleaning.

-1 perforated hinged door

-air inlet duct flanged with counter flange, comprising air flow regulating flaps

-interfloor filament duct, length 2000 mm

-alu chutes for start-up

-nozzles for connection of differential pressure gauge.

Spinning vapour exhausts:

-exhaust hood per spinning position for removal of spinning vapour

-hood designed as follows:

made from stainless steel

air flow regulation flap

hood removable for cleaning

Take-up frames, type riedraw 1:

Welded steel frame, housing all drawrolls, compressed air supply pipes for the aspirator units and the yarn waste pipes within the fdy take-up unit.

Per position:

4 inlet yarn guides

2 spin finish application nozzles per end

1 yarn cutter / aspirator unit

2 spin finish pump

4 centring yarn guides

4 pre-intermingling jets

4 intermingling units

1 additional operator panel between duo1 and duo 2.

rolls as described further

1 automatic winder riemat a6-094

Drawrolls:

Mono 1 with 1 rievap 32 dual shell drawroll, type j7/32-40, ot40

Speedrange: 750 to 4000 mpm

Roll diameter: 190 mm

Working width: 250 mm

Temperature range: 45-250°c

And 1 bearing separator roll, type srd60

Hard chromium plated

Duo 1 with 2 rievap 32 dual shell drawroll, type j7/32-60, ot40

Speedrange: 1000 to 6000 mpm

Roll diameter: 190 mm

Working width: 250 mm

Temperature range: 45-250°c

Duo 2 with 2 rievap 32 dual shell drawroll, type j7/32-60, ot40

Speedrange: 1000 to 6000 mpm

Roll diameter: 190 mm

Working width: 250 mm

Temperature range: 45-250°c

Duo 3 with 2 cold draw roll units each type j7/45-55

Speedrange: 1800 to 5500 mpm

Roll diameter: 150 mm

Working width: 180 mm

Automatic and wasteless winder riemat a6-094:

Spindle driven

Number of ends per winder: 4 ends

Yarn count range: 15 to 1000 dtex

Take up speed: 2500 to 5500 m/min

Chuck length: 900 mm

190 mm stroke, 420 mm outside package diameter

Package volume: 24.7 dm³

Tube bore: 94 ± 0.2 mm

Tube outside diameter: 106 ± 0.4 mm

Tube length: 225 ± 0.5 mm

Compressed air distribution station:

Mobile aspirator guns with hoses

Electrical control equipment

For electrical power

general : 3 x 380v/50hz plus ground wire

Euro-standard: 3x400v 50 or 60hz plus ground wire

Maximum voltage variation ±10% measured at terminals of cabinets

maximum frequency variation: ±2%

Process control system (cif):

Fully integrated control system to control and monitor the entire spinning line.

The central monitoring unit si linked to the plc of the spinning section and the plcs of each spinning position.

Drive and heater control:

Spinning section.

Speed adjustment for the extruder motor is done via a dc-convertor.

To achieve a constant pressure at the extruder outlet, the output of the pressure controller is transmitted to the dc-converter to adjust the extruder speed.

The feedback of the actual extruder speed is done by a tacho generator mounted on the extruder motor.

One common frequency inverter supplies the synchronous ac motors for the spin pumps.

According to process conditions, the plc transmits the setpoint to the inverter.

All motors are equipped with an overload protection.

Solid state relays heat each extruder zone and spinning beam.

Each extruder zone and the spinning beam represent an independent control loop.

Take-up section:

The inverter unit is a processor-controlled static frequency inverter for powering the 3-phase motors.

All inverter units in a position cabinet are supplied with approx 570v dc from a common rectifier.

Heating system:

The heating unit rhu is processor-controlled.

The power supply is taken straight from 3-phase 380/400v which powers the cabinet.

The inductor is fitted inside the draw roll.

The rhu switches the current on and off in this inductor.

While current flows, a voltage is inducted into the rotating draw roll.

This sets up a short-circuit current in the draw roll, thereby heating the roll unit.

HOURLY PRODUCTION:

FOR 150 DENIER @ 3500 MPM WINDER SPEED, THE HOURLY PRODUCTION IS 3.5 KG/BOBBIN.

AS THERE IS 4 ENDS PER POSITION, THIS MEANS 14 KG/HOUR/POSITION

M26/39 ARE OF 2 + 4 POSITIONS; HENCE M26 = 28 KG/HOUR AND M39 = 56 KG/HOUR

M27/28/30 ARE OF 2 POSITIONS EACH, HENCE 28 KG/HOUR EACH.

(AS PER OUR PEOPLE AT THE EXTRUSION PLANT, THEY WERE RUNNING TRIALS TO PRODUCE THE 150 DENIER @ 4000 MPM WINDER SPEED)

FOR 300 DENIER @ 3600 MPM WINDER SPEED, THE HOURLY PRODUCTION IS 7.2 KG/BOBBIN.

AS THERE IS 4 ENDS PER POSITION, THIS MEANS 28.8 KG/HOUR/POSITION

M26/39 ARE OF 2 + 4 POSITIONS; HENCE M26 = 57.6 KG/HOUR AND M39 = 115.2 KG/HOUR

M27/28/30 ARE OF 2 POSITIONS EACH, HENCE 57.6 KG/HOUR EACH.

FOR 600 DENIER @ 2200 MPM WINDER SPEED, (SPEED LIMITATION DUE TO EXTRUDER CAPACITY) THE HOURLY PRODUCTION IS 8.8 KG/BOBBIN.

AS THERE IS 4 ENDS PER POSITION, THIS MEANS 35.2 KG/HOUR/POSITION

M26/39 ARE OF 2 + 4 POSITIONS; HENCE M26 = 70.4 KG/HOUR AND M39 = 140.8 KG/HOUR

M27/28/30 ARE OF 2 POSITIONS EACH, HENCE 70.4 KG/HOUR EACH.

MACHINE HAS BEEN PARTIALLY DISASSEMBLED (EXTRUDERS AND SPINBEAMS HAVE BEEN TAKEN DOWN TO GROUNDFLOOR) REST OF THE EQUIPMENT STILL TO BE DISASSEMBLED

Learn More

J-5305 FINISHING PLANT FOR WORSTED AND WOOLEN

Compare

J-5305 FINISHING PLANT FOR WORSTED AND WOOLEN SPLIT SALE POSSIBLE Learn More

TT-7680 SIEMENS SST 400 CONDENSING STEAM TURBINE, YEAR 2011, 50/60Hz, 30 MW

Compare

TT-7680 SIEMENS SST 400 CONDENSING STEAM TURBINE, YEAR 2011, 50/60Hz, 30 MW SIEMENS SST 400 YEAR 2011 TYPE: SST 400 CONDENSING STEAM TURBINE WITH FOUR BLEEDS AND ONE EXTRACTION TURBOSE OUTPUT: (AT GENERATOR TERMINALS) NORMAL 30 MW MAXIMAL 31.88 MW MINIMAL 4.5 MW QUANTITY: 4 Learn More

TT-2791 SIEMENS SST-400 STEAM TURBINE, 30MW, 10500V, 50Hz

Compare

TT-2791 SIEMENS SST-400 STEAM TURBINE, 30MW, 10500V, 50Hz QUANTITY: 1 Learn More