Search results for: 'Fiber ope'

REFERENCE NUMBER: M-1585 (66012THSGW5UF) STAPLE FIBER LINE – 20 TO 25 TONS PER DAY PRODUCT SPEC.: 1.4 ~ 20 DE. PET STAPLE FIBER SPINNING LINE CAPACITY: SPINNING: 20 T/D, DRAWING: 25 T/D CURRENTLY IN OPERATION SPINNING LINE DRAW LINE QUANTITY AVAILABLE: 1 Learn More

TT-8275 EDGE TRIM OPENER, 9.25 KW, WORKING WIDTH 500mm QUANTITY: 1 Learn More

TT-5138 RIETER OPEN END LINE 5400 ROTORS, MODEL R60, YEAR 2014 TO 2016 RIETER OPEN END LINE 5400 YEAR 2014 TO 2016 BLOWROOM MACHINES: UNIFLOC A11 HEAVY METAL SEPARATOR A 48 UNICLEAN B122 UNIMIX B76 UNISTORE A79 CONDENSER A21 MAGIC EYE JOSSI VISION SHIELD JOSSI TVS XSPECT WASTE OPENER B25 UNICONTROL Learn More

TT-4959 RIETER COTTON RING SPINNING PLANT WITH 26112 SPINDLES, YEAR 2010 TO 2016 RIETER COTTON RING SPINNING PLANT 26112 SPINDLES PRODUCTION YEAR: 2016 BRAND: RIETER STATE: USED QUANTITY: 1 Learn More

YY-2756 SKEIN WINDER FOR LABORATORIES AND SMALL FIBER MILLS ELECTRIC SPECIFICATIONS: POWER CONSUMPTION: 1.0 KW SINGLE PHASE 230V 50/60Hz (CUSTOMIZABLE) SIZE OF THE MACHINE (LENGTH X WIDTH X HEIGHT): 3060 mm X 1580 mm X 2060 mm (120'' X 62'' X 81'') THE WOODEN CRATE SIZE IS 235 X 140 X 182 CM, WITH A GROSS WEIGHT OF 840 KG. THE MACHINE ITSELF WEIGHS 500 KG. QUANTITY: 1 Learn More

YY-2515 NONWOVEN PRODUCTION LINE, MAXIMUM NET WIDTH 4200mm RAW MATERIALS: 6D- 15D X 76-102mm PET OR PP MAIN APPLICATION: FOR GEOTEXTILE MAXIMUM NET WIDTH: ≤4200mm PRODUCT WEIGHT: 150 TO 1000GSM THE CAPACITY OF THE WHOLE LINE: ≦ 800KGS/H @ OVER 500GSM PRODUCT WITH OVER 6D FIBER ASK FOR MORE DETAILS! QUANTITY: 1 Learn More

YY-2514 NONWOVEN PRODUCTION LINE, MAXIMUM NET WIDTH 6000mm RAW MATERIALS: 3D- 15D X 51-102mm PET OR PP MAIN APPLICATION: FOR GEOTEXTILE MAXIMUM NET WIDTH: ≤6000mm PRODUCT WEIGHT: 200 TO 700GSM CAPACITY OF CARDING MACHINE: ≦ 1000KGS/H THE CAPACITY OF THE WHOLE LINE: ≦ 800KGS/H @ OVER 500GSM PRODUCT WITH OVER 6D FIBER ASK FOR MORE DETAILS! QUANTITY: 1 Learn More

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: V-0025 COTTON PAD, BALL, SWAB MACHINES M-5138 SQUARE COTTON PAD PRODUCTION MACHINE M-5139 COTTON GAUZE PAD PRODUCTION MACHINE M-5140 MACHINE TO PRODUCE VARIOUS TYPES OF COTTON PADS M-5141 COTTON PAD PRODUCTION MACHINE M-5142 MAKEUP REMOVING COTTON PAD PRODUCTION MACHINE M-5143 ROUND COTTON PAD MAKING MACHINE M-5144 SQUARE ABSORBENT COTTON PAD PRODUCTION MACHINE M-5145 ROUND ABSORBENT COTTON PAD PRODUCTION MACHINE M-5146 ROUND COTTON PADS MAKING MACHINE M-5147 COTTON PAD MAKING MACHINE M-5148 COTTON PAD MAKING MACHINE M-5168 COTTON PADS MAKING MACHINE M-5169 COTTON Q-TIP MAKING MACHINE (100PCS/BAG) M-5170 COTTON BALL MAKING MACHINE (NEW) M-5171 COSMETIC COTTON PAD (GLOVE SHAPE) MAKING MACHINE M-5172 COSMETIC COTTON PAD MAKING MACHINE (ROUND PAD) M-5101 MEDICAL COTTON BALL MAKING MACHINE 20KG/HOUR QUANTITY AVAILABLE: 17 Learn More

TT-8289 SPUNLACE LINE, WORKING WIDTH 3000mm, YEAR 1980 TO 2004 1. SPUNLACE LINE 2. YEAR: 1980 TO 2004 3. WORKING WIDTH: 3000mm QUANTITY: 1 Learn More