Search results for: 'Winder machine s'

REFERENCE NUMBER: J-0015 (11116JKYCV10) PLANTEX BCF MULTIFILAMENT PP CARPET YARN MACHINERY YEAR 1998 BRAND: PLANTEX TYPE: 3/12U/3C X 2 YEAR: 1998 FOR POLYAMIDE AND POLYPROPYLENE 1000-6000 DTEX YARNIN 3 COLORS ALTERNATIVE 2 OR 1 COLOR SOLUTION DYED PRODUCTION 6 X150 –750kg/H WITH 24 THREAD LINES FOR 1000-3000 DENIER 12 THREAD LINES FOR 3000-6000 DENIER FILAMENT RANGE 15 TO 25 DEN/FILAMENT PLANT FEATURES 6 ELECTRONIC GRAVIMETRIC DOZING 4 COMPOUND 6 EXTRUDERS 2 SPINNHEAD 6 SPINNING PUMPS 6 SPINNING POSITIOS 24 SPINNING PACKS 72 SPINNERETTES GODETS PRE-TENSION GODETS 1 MOTORISED ROLL WITH 1 IDLE ROLL PER SPINNING POSITION SLOW DRAWING GODETS 1 MOTORISED HEATED ROLL WITH 1 IDLE ROLL PER SPINN. POS. FAST DRAWING GODETS 2 MOTORISED HEATED ROLLS PER SPINNING POSITION TAKE-UP FEEDING GODETS 1 MOTORISED ROLL WITH 1 IDLE ROLL PER WINDER (2 ENDS) MAXIMUM-SPEED 3.000 M/MIN TEXTURISING SYSTEM TEXTURISING POSITIONS 6 TEXTURISERS 24 (4 EACH TEXTURISING POSITION) COOLING DRUMS (4 ENDS EACH) INTERLACERS 12 (2 ENDS EACH) WINDERS 12 MAXIMUM SPEED 3.000 M/MIN BOBBINS 2 PER WINDER WINDING TUBE I.D. 73 MM WINDING TUBE O.D. 79 MM WINDING TUBE LENGTH 290 MM WINDING TRAVERSE STROKE 250 MM BOBBIN MAX. DIAMETER 360 MM BOBBIN MAX. WEIGHT 4,5 K QUANTITY AVAILABLE: 2 Learn More

TT-5631 COMPLETE WEAVING AND FINISHING MILL FOR THE PRODUCTION OF DECORATIVE FABRICS, CURTAINS AND SUN PROTECTION, YEAR 1986 TO 2019 Learn More

REFERENCE NUMBER: M-3973 (99016AVEZ8RX)-D HOTMELT POWDER SCATTERING AND LAMINATING MACHINE-2200mm 1.LAMINATING LINE : MAKE : VILLARS (CH) ACTUALLY SANTEX YEAR: 1993 WORKING WIDTH : 2200mm (NOMINAL WIDTH 2M10) VOLTAGE: 3X380(400)V TOTAL POWER : 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION : INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997) : 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS : 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED 2.ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM : MAKE : MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR: 1999 OPERATING VOLTAGE : 3X380V CAPACITY ACCUMULATOR : +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) 3. SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE : MAKE: MENZEL YEAR: 2000 OPERATING VOLTAGE : 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT KNOWN PROBLEM : PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) 4.MISCELLANEOUS : SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS Learn More

REFERENCE NUMBER: A-1876
END OF LINE UNIT T4.0 FOR NEEDLEPUNCHED PRODUCTS – 4000mm

PRODUCT TO BE PROCESSED: NEEDLEPUNCHED NONWOVENS
PRODUCT WIDTH: 4.000 MM

WORKING SPEED: 1 – 20 M/MIN

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-1137 WORSTED WOOL RING SPINNING PLANT, YEAR 1988 TO 1991, WITH 8968 SPINDLES SPECIFICATIONS: WORSTED(WOOL) RING SPINNING PLANT COMPLETE(TOTAL 8,968 SPINDES) OF NM20 ~ NM120 100% PURE WOOL PRODUCTION LINES RECOMBING SECTION : 2 BLENDING GILL MACHINES(COGNETEX/TEMATEX)) 2 PREGILL MACHINES(COGNETEX/TEMATEX) 14 RECOMBING MACHINES(4 SETS NSC PB31,4 SETS SANT'ANDREA P90,6 SETS SANT'ANDREA PSE10) 2 FIRST GILL MACHINES(COGNETEX/TEMATEX) 2 SECOND GILL MACHINES(COGNETEX/TEMATEX) ----------------------------------------------------------------------------------------- PREPARATION TO SPINNING SECTION : 2 AUTOLEVELLER GILL MACHINES(COGNETEX/TEMATEX) 2 HIGH SPEED GILL MACHINES(COGNETEX/TEMATEX) 2 BICOILER GILL MACHINES(COGNETEX/TEMATEX) 2 BOBBINER MACHINES(COGNETEX SFC,22 SPINDLES) ----------------------------------------------------------------------------------------- SPINNING SECTION : 6 TOYODA RXW RING SPINNING FRAMES(624 SPINDLES,45MM RING DIA.75MM GAUGE,YEAR 2000 3 SETS,YEAR 2003 3 SETS) 6 COGNETEX RING SPINNING FRAMES(448 SPINDLES,FTC7L,48MM RING DIA.YEAR 1991) 6 COGENTEX RING SPINNING FRAMES(416 SPINDLES,FTC8L,55MM RING DIA.YEAR 1988) ----------------------------------------------------------------------------------------- WINDING AND TWISTING SECTIONS : 4 AUTOMATIC WINDERS(SAVIO,RAS-15,1 SET 64 SPINDLES,3 SETS 56 SPINDLES) 2 DOUBLING MACHINES(FADIS,42 SPINDLES,YEAR 1995) 10 TWO FOR ONE TWISTING MACHINES(MURATA,363,120 SPINDLES,YEAR 1989) 2 TWO FOR ONE TWISTING MACHINES(LEEHWA,120 SPINDLES,YEAR 2003) 2 STEAM SETTING MACHINES(ASHIDA) ----------------------------------------------------------------------------------------- PREPARATION TO SPINNING SECTION : 1 NSC BLENDING GILL MACHINE(GN6,1991) 1 NSC GILL MACHINE(GN6,1991) 1 NSC GILL MACHINE(GN6,1991) 1 NSC GILL MACHINE(GN6,1991) 1 NSC REDUCER MACHINE(FM5P,8 SPINDLES,YEAR 1991) 1 NSC BOBBINER MACHINE(FM7A,20 SPINDLES,YEAR 1991) QUANTITY AVAILABLE: 1 Learn More

YY-2736 NEEDLE PUNCHING LINE, WORKING WIDTH 4800mm (NEW) MACHINE LIST: BALE OPENER→ PRE-OPENER→ LARGE CHAMBER MIXER→ FINE OPENER→ VIBRATING CHUTE FEEDER→ HIGH SPEED CARDING MACHINE→ CROSS-LAPPER→ FEEDER→ PRE-NEEDLE MACHINE→ UP NEEDLE PUNCHING MACHINE→ DOWN NEEDLE PUNCHING MACHINE→ FABRIC ACCUMULATOR→WINDER AND SLITTING MACHINE. QUANTITY: 1 Learn More

TT-7807 KUSTERS CONTINUOUS BLEACHING RANGE, WORKING WIDTH 3600 TO 3800mm, YEAR 1991 1. KUSTERS CONTINUOUS BLEACHING RANGE 2. FOR FLAT AND TERRY COTTON AND COTTON BLENDED FABRIC 3. YEAR 1991 4. WORKING WIDTH: 3600 TO 3800mm 5. PRODUCTION SPEED: 120M/MIN QUANTITY: 1 Learn More

YY-2409 SLOT DIE COATING MACHINE, MAXIMUM COATING WIDTH 1550mm (61 INCHES) APPLICATION: 1. HOT MELT SENSITIVE PRESSURE ADHESIVE COATING AND LAMINATION LINE, FOR COATING, LAMINATION, PEELING, REWINDING FUNCTION. 2. APPLICATION MATERIAL: PET, PVC, PAPER ETC. MACHINE FEATURES: 1. THIS MACHINE INCLUDES MICROCOMPUTER PLC, TOUCH SCREEN CONTROL, SIMPLE OPERATION AND HIGH AUTOMATION; 2. USING HIGH WEAR-RESISTANT ALLOY STEEL SLOT DIE, WITH COATING CONTROL ACCURACY AND GOOD SERVICE LIFE; 3. AN OVERALL COATING ADJUSTMENT BRACKET IS INCLUDED, AND THE REPEAT POSITIONING ACCURACY IS PRECISE; 4. AUTOMATICALLY TRACKS AND DISPLAYS AND STORES THE AMOUNT OF GLUE NEEDED, MAKING THE OPERATION AND USE CONVENIENT AND FAST; 5. THE FIRST UNWINDING IS EQUIPPED WITH A WEB GUIDING DEVICE, WITH A HIGH-PERFORMANCE INFRARED SENSOR AND ELECTRIC CONTROLLER TO ENSURE THE EVEN LET OFF OF THE MATERIAL ROLL; 6. THE HEATING TEMPERATURE IS ALL CENTRALLY CONTROLLED BY PLC; 7. THE AMOUNT OF GLUE SUPPLIED BY THE METERING PUMP FOR THE COATING WIDTH IS INPUT BY THE WORKER, AND THE AMOUNT OF GLUE SUPPLIED WILL BE AUTOMATICALLY CALCULATED AND SUPPLIED TO THE DIE SLOT. QUANTITY: 1 Learn More

REFERENCE NUMBER: L-6890 TEXPA HEMMING AND LABEL SEWING MACHINES, MODEL QRSN RUNNING TERRY ITEM 001 TEXPA LONGITUDINAL HEMMING MACHINE YEAR 2005 QUANTITY: 1 ITEM 002 TEXPA CROSS HEMMING AND LABEL SEWING MACHINE YEAR: 2005 MODEL: QRSN POSSIBILE TO SEW THREE TYPES OF LABELS: U, V, FLAG PFAFF SEWING MACHINES EQUIPPED FOR TERRY TOWEL WORKING WIDTH: 300mm TO 2000mm QUANTITY: 1 STATUS: STOPPED, NOT DISMANTLED DELIVERY: DISMANTLING AND LOADING WILL NEED 3 WEEKS, REQUIRES TWO 40 FT CONTAINERS TO SHIP Learn More

REFERENCE NUMBER: L-5506

ZINSER LINKED RING SPINNING MACHINES MODEL 320, YEAR 1989 TO 1990

 

YEAR: 1989 TO 1990

MODEL: 320

1196 SPINDLES

RING DIAMETER: 42mm

FLANGE 1

GAUGE: 75mm

TUBE LENGTH: 220mm

 

QUANTITY: 18

Learn More