Search results for: 'steam+elect'

T-9112 MONFORTS SHRINKING MACHINE FOR KNIT FABRIC PRESHRINKING, WIDTH 1600mm, YEAR 2004-PRESHRINKING MACHINE FOR KNIT (NOT WOVENS) BRAND: MONFORTS MODEL: TOPTEX YEAR 2004 THIS MACHINE WAS USED TO SANFORIZE COTTON FABRIC BANDAGES WITH TWISTED YARNS IN THE WARP. QUANTITY: 1 Learn More

T-7427 EPSON ROBUSTELLI DIGITAL PRINTING MACHINES, YEAR 2017 HEAD PIECES: 32 HEAD BRAND: EPSON PRECISION CORE COLOR PIECES: 8 WORKING WIDTH: 1800mm INK TANK CAPACITY: 3 LITERS MAX PRINT SPEED: 450 LINEAR METER / H INSTALLED ELECTRIC POWER: 19 KW BELT HEATER: AVAILABLE BELT BLOWER: AVAILABLE DRIVEN FABRIC UNIT: EFFE FABRIC ENTRY UNIT: EFFE DRYER UNIT: EFFE 3 PHASE DRYER DRYER HEATING CAPACITY: NATURAL GAS NAM BURNER 125 KW POWER SUPPLY UNIT: İNFORM 30 KVA QUANTITY: 2 Learn More

A-2611 ULTRAVIOLET AGING TESTING CHAMBER BOX TYPE FLUORESCENT UV LAMP IS IMPORTED FOR THIS ACCELERATED AGING TEST CHAMBER. CAN SIMULATE HARM BY SUNLIGHT, RAINWATER AND DEW. UV WEATHER RESISTANCE CHAMBER USE FLUORESCENT UV LAMP TO SIMULATES THE EFFECT OF SUNLIGHT, CONDENSATION MOISTURE IS USED TO SIMULATE DEW. THE TESTED MATERIAL IS PLACED IN A LOOP PROGRAM THAT ALTERNATES LIGHT AND MOISTURE AT A CERTAIN TEMPERATURE. THE MATERIAL WAS TESTED FOR ACCELERATED WEATHERABILITY. UV CHAMBER CAN RE-CREATE HAZARDS THAT OCCUR OUTDOORS FOR MONTHS OR YEARS.THE TYPES OF HAZARDS INCLUDE: DISCOLORATION, CHALKINESS, POWDER LIGHT, CRACKING, TURBIDITY, BUBBLES, BRITTLE, STRENGTH, DECAY, OXIDATION, ETC. THIS MACHINE INCLUDES SPRAY DEVICE. Learn More

REFERENCE NUMBER: A-2487 165 KG CAPACITY SPLIT POCKET WASHER EXTRACTOR • 165 KG CAPACITY • SEPARATE 3 POCKET, PREVENTING LARGE ITEMS FROM GETTING ENTANGLED • HIGH WASHING QUALITY • EASY USING MACHINE • HIGHER OPERATOR COMFORT AND FASTER PREPARATION TIMES AT FLATWORK FINISHING SIDE • HEAVY DUTY CONSTRUCTION • OPTIMIZED ENERGY AND REDUCED COST • MAXIMUM EFFICIENCY WITH SUSPENSION SYSTEM AND NEW DRUM DESIGN WHICH PROVIDES ENERGY AND TIME SAVING FEATURES: • QUALITY WASHING PROCESS OPTIMIZING WATER, ENERGY AND CHEMICAL PRODUCTS • SAVING IN THE DRYING PROCESS DUE TO ITS SPIN FACTOR 350 G • WIDE - RANGING POSSIBILITIES WITH AN EASY PROGRAMMING • EXCELLENT WASH QUALITY WITH SPLIT DRUM STRUCTURE AND BREAKWATERS 50% LONGER LIFETIME THE TEXTILE WITH TEXTILES FRIENDLY DRUM STRUCTURE • QUITE AND PERFECT OPERATION WITH ELECTRONIC ANTI-BALANCE CONTROL • HIGH EXTRACTING FORCE • TEXTILE FRIENDLY WASHING MACHINE • FREE STANDING CONSTRUCTION WITH NEW DEVELOPED SPRING SYSTEM • DOOR DESIGN THAT PROVIDES WATER TIGHTNESS AND HEAT ISOLATION • NEW GENERATION TOUCH SCREEN CONTROLLER • AUTOMATIC DOOR POSITIONING SYSTEM • HIGH-GRADE STAINLESS STEEL INNER AND OUTER DRUM AND THE ENTIRE BODY SPECIFICATION: DRUM POCKET: 3 PCS CAPACITY: 165 KG / LOAD DRUM SIZE: Ø 1480 / 1000 mm DRUM VOLUME: 1720 LT MOTOR POWER: 30 KW EXTRACTING SPEED: 650 CYCLE / DK G FACTOR: 350 G STEAM HEATING POWER: 120 CYCLE / DK WIDTH: 2600 mm DEPTH: 1770 mm HEIGHT: 2450 mm NET WEIGHT: 4850 KG Learn More

REFERENCE NUMBER: J-2640
DYEING AND FINISHING PLANT FOR SALE

ITEM 001
THIES SAMPLE DYEING MACHINE
MODEL: MINISOFT SAMPLE
CAPACITY: 50 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 002
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
3 PORT SPLIT/SPLIT
CAPACITY: 900 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 003
THIES DYEING MACHINE
MODEL: ECOSOFT PLUS
2 PORT SPLIT/SPLIT
CAPACITY: 600 KGS
YEAR: 1999
MICROPROCESSOR CONTROL
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 004
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
1 PORT SPLIT/SPLIT
CAPACITY: 300 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: A460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 005
GASTON COUNTY DYEING MACHINE
MODEL: AQUAFLOW
2 PORT
CAPACITY; 250 KGS
YEAR: 1987
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING AND UNLOADING REEL
QUANTITY: 1

ITEM 006
THIES DYEING MACHINE
MODEL: SOFT TRD
2 TUBE
CAPACITY: 700 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 007 (also our J-2647)
LAFER OPEN WIDTH COMPACTOR MACHINE
MODEL: KSA 500 2400/2200
YEAR: 1998
LAFER TEXEN CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY, VERTICAL PIN CHAIN, WITH PLATE GUIDES, RAIL OPENING, PINNING BRUSHES, PINS ONLY, WITH SUPPORT SECTION FOR THE FABRIC IN THE CENTER, AT 10’ THERE IS A STEAMING SECTION, TOTAL LENGTH OF THE TENTER IS 30’, WITH AUTOMATIC LUBRICATION FOR THE CHAIN
• KSA 500 COMPACTOR BENCH WITH TEXEN CONTROLS
• TENSIONLESS FABRIC CONVEYOR
• PLAITOR AND FABRIC SCRAY WITH OPTICAL LOAD SENSOR
• INLINE INSPECTION BATCHER MACHINE, WITHH A BACK LIGHTED BOARD, MANUAL CUT
• SCALE TO WEIGHT THE FABRIC
QUANTITY: 1

ITEM 008 (also our J-2648)
SANTEX TUBULAR 4-ROLL EXTRACTION PAD
MODEL: SANTASTRETCH PLUS 140
YEAR: 1998
COMPOSED OF TURNTABLE, DETWISTER, TUBULAR 4-ROLL PAD WITH WET SPREADERS, PLAITOR
WITH ADDITION TANKS FOR SOFTENER
REEL FABRIC PLAITOR EXIT
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 009
SANTEX CONVEYOR DRYER FOR OPEN WIDTH AND TUBULAR FABRIC
MODEL: SANTASHRINK 4/5240
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER TO
• (2) SANTEX 2-ROLL PADS, RUBBER OVER RUBBER, 102” WIDE x 12” DIAMETER, STAINLESS STEEL PAN, 10-TON PAD, SWING-AWAY PAN, TENSION BAR WITH 2 STAINLESS STEEL MIXING TANKS, 75 GALLONS EACH
• DRIVEN SCROLL ROLLS WITH EDGE GUIDE CONTROL, WIDTH 95”
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY 45°, YEAR 1998, VERTICAL PIN CHAIN, 30’ LONG WITH TANDEMATIC PLATE GUIDES, RAIL GUIDES, PINNING BRUSHES, GUIDE SUPPORT FOR THE FABRIC, FABRIC CONVEYOR TO ENTER BOTH TUBULAR OR OPEN WIDTH FABRIC TO
• CONVEYOR DRYER 100” WIDE, 5 ZONES, 3-PASS WITH MAXON BURNERS, 5 CIRCULATING FANS TO CONVEYOR BELT TO PLAITOR
• ALL MOTORS AND SANTEX CONTROLS AND MONITORS
QUANTITY: 1

ITEM 010
SANTEX AG TUBULAR COMPACTOR MACHINE
MODEL: SANTASPREAD 140
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSIONS BAR ENTRY
• OPERATOR’S PLATFORM
• TENSION DEVICE
• DRIVEN SPREADER BARS
• STEAMING DEVICE
• TUBULAR COMPACTING BENCH
• FELT BLANKET ONTO THE CONVEYOR BELT
• PRECISION PLAITOR
• TABELTOP ELECTRONIC SCALE
QUANTITY: 1

ITEM 011
COMET NAPPER
MODEL: PEGSO-X4
YEAR: 1998
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
24 ROLLS WITH TURNING BARS FOR TUBULAR 90” WIDE
XYCOM CONTROLS
12-BAG COLLECTION SYSTEM AND PLAITOR
YEAR: 1996
QUANTITY: 1

ITEM 012
STENTEX TENTER FRAME
MODEL: STENTOTHERM 3300
YEAR: 1999
STENTEX CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION ENTRY TO TEXT-STAR TYPE GUIDER TO 2 ROLL PAD
• ADDITION TANK TOP SCRAY PAD TO TEXT-STAR TYPE GUIDER
• TWO ROLL PAD R/R 10 TON
• OPERATOR’S PLATFORM
• WORKING WIDTH 1800mm
• HORIZONTAL PIN CHAIN, KNIT ENTRY
• TANDEMATIC SPLITLEVEL DECURLERS
• OVERFEED
• PINNING BRUSHES
• STEAM BOX
• RAIL GUIDERS, 20 FEET ENTRY, 8 ZONES
• 80 FEET HOUSING
• SCREEN MONITORS
• GAS FIRED, MAXON OVEPAK 408 BURNERS
• HONEYWELL CONTROLS
• 3 FEET COOLING ZONE
• 2 COOLING CANS, SELVEDGE TRIMMERS
• PLIATOR, SCRAY
• ZONE IN LINE INSPECTION BATCHER
QUANTITY: 1

ITEM 013
ZIMMER ROTARY SCREEN PRINTING MACHINE
MODEL: R92-S153
YEAR: 1993
COMPOSED OF:
• TENSION BAR SKY ENTRY
• SCRAY
• CORINO BRUSH
• CORINO PRINT GUIDER
• ZIMMER PRINTER, 8 COLOR, 86” BLANEKT
• PRINT CONVEYOR DRYER, 30’ LONG, 3-ZONE, GAS FIRED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 014
SAFETY SWITCH BULLET NOSE SLITTER
MODEL: CUTTING
WITH REEL FABRIC PLIATOR
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

Learn More

MAKE: MS PRINTING SOLUTIONS
MODEL: ECOVAPOR 110
FABRIC CAPACITY: 110 M
ROLLER WIDTH: 2200mm
SATURATED STEAM OPERATION: 102 TO 106 ⁰C
STEAM CONSUMPTION: 400 TO 600 KG/H
HIGH TEMPERATURE OPERATION: 180 ⁰C
TEMPERATURE DIATHERMIC OIL: 260 ⁰C
INSTALLED THERMIC POWER: 64,000 KCAL/H
WORKING SPEED: 2 TO 20 METERS/MINUTE
DWELL TIME: 5,5 TO 55 MINUTES
INSTALLED ELECTRIC POWER: 16 kVA
AIR COMPRESSED CONSUMPTION: 2 L/MIN
AIR COMPRESSED SUPPLY: 2 BAR
VOLTAGE: 400V 50/60Hz

QUANTITY: 1

 

Click here to watch the videos of this machine on YouTube.

Learn More

REFERENCE NUMBER: T-1138

LORIS BELLINI APPC/LV 150 HANKS CABINET DYEING MACHINE, YEAR 1988 RECONDITIONED 2016

 

HANKS CABINET DYEING MACHINE

UNDER PRESSURE TEMPERATURE 110°C

WITH EXTRACTABLES BASKETS

MODEL LORIS BELLINI APPC/LV 150

YEAR 1988 FULLY RECONDITIONED 2016

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: T-1139

OBEM HANKS CABINET DYEING MACHINE, YEAR 1989 RECONDITIONED 2017

 

HANKS CABINET DYEING MACHINE

UNDER PRESSURE TEMPERATURE 110°C

WITH EXTRACTABLES BASKETS

BRAND OBEM

TYPE MBC 350/06/CE

YEAR 1989 FULLY RECONDITIONED 2017

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: L-5744

LPG GAS MANUFACTURING PLANT, YEAR 2010 – PROPANE, ISO BUTANE, BUTANE, PENTANE

 

 MANUFACTURING YEAR: 2010

 

CAPACITIES:

LIQUEFACTION EQUIPMENT: 80,000 SM³/DAY

DISTILLATION EQUIPMENT: 65,000 SM³/DAY(120TON/DAY)

PRODUCT : PROPANE, ISO BUTANE, BUTANE, PENTANE

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: R-8947
SCIROCCO MODULAR BOARDING MACHINE FOR MEN SOCKS
QUANTITY: 1

Learn More