Search results for: 'Electric d'

TT-7165 COMPLETE TEXTILE MILL EQUIPMENT, YEAR 1986 TO 2023 COMPLETE DENIM TEXTILE MILL EQUIPMENT: WEAVING, SIZING, TWISTING, WINDING, AND FINISHING MACHINERY - INCLUDING CONTINUOUS WASHING, MERCERIZING, AND SANFORIZING. Learn More

YY-1366 BAG CLOSING MACHINE HEAD, INSTRUCTION MANUAL FOR OPENRATOR SAFETY: - THIS MANUAL BOOK CONTAINS INSTRUCTIONS AND PRECAUTIONS FOR USING THE BAG CLOSING MACHINE HEAD. BE SURE TO READ AND UNDERSTAND THE MANUAL BOOK BEFORE USING THE MACHINES. - KEEP THIS MANUAL BOOK NEAR THE SEWING MACHINE FOR REFERENCE. BE SURE TO ATTACH THIS MANUAL BOOK TO THE MACHINE WHEN LENDING OR TRANSFER IT TO ANOTHER PERSON OR COMPANY. - PLEASE CONTACT THIS MANUAL BOOK FROM US IF IT LOST. - THE CONTENTS OF THIS MANUAL BOOK ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE FOR IMPROVEMENT AND SAFETY PURPOSE. Learn More

REFERENCE NUMBER: R-9392

ROLLS-ROYCE/ABB DIESEL GENERATORS – NEW, 27.7 MW, FUEL MDO (MARINE DIESEL OIL), YEAR 2015 – 60Hz

 

(5587 KW X 2 + 4190 KW X 4 = 27.934 KW ROLLS-ROYCE)

Learn More

TT-7981 REGGIANI RENOIR ROTARY PRINTING MACHINE, WIDTH 3200mm, YEAR 1991 1. REGGIANI RENOIR ROTARY PRINTING MACHINE 2. NO. OF COLORS INSTALLED: 12 3. NO OF COLORS POSSIBLE TO INSTALL: 15 4. MAX. PRINTING WIDTH: 3200mm 5. COLOR APPLICATION SYSTEM: MAGNET SYSTEM 6. DRYER HEATED WITH: GAS 7. YEAR: 1991 8. ELECTRICAL TENSION: 3 X 380 V 50 Hz 9. COLOR FEEDING SIDE: LEFT 10. OPERATING SIDE: RIGHT 11. GLUE APPLICATION: HYDROSOLUBLE QUANTITY: 1 Learn More

TT-4110 SAMCO TC-75 FULL HEAD HYDRAULIC DIE CUTTER, 67” X 32”, CAPACITY 75 TON THIS MACHINE IS NOT RUNNING DUE TO AN ELECTRICAL ISSUE QUANTITY: 1 Learn More

TT-3818 DILO DI-LOOM OD-II HSC 12.5 NEEDLE LOOM, WIDTH 1250mm, YEAR 2004 BRAND: DILO NEEDLE LOOMS MODEL: DI-LOOM OD-II HSC 12.5 CONDITION: USED YEAR: 2004 ELECTRICITY: 480/3/60 QUANTITY: 1 Learn More

TT-3762 HFO WARTSILA W18V32 POWER PLANT, 7MW, 60Hz, YEAR 2001 HFO WARTSILA W18V32 35MW 60Hz POWER PLANT THIS POWER PLANT HAD OPERATED 5 DIESEL ENGINE GENERATORS FOR ELECTRICITY PRODUCTION USING DIESEL OIL AS FUEL ENGINE MODEL IS WARTSILA W18V32. GENERATOR MODEL IS ABB AND ITS OUTPUT IS 7,050KWE AT 60Hz. THEY WERE PRODUCED IN 2001 AND HAD BEEN SUCCESSFULLY OPERATED FOR ABOUT 35,000 RUNNING HOURS. THE POWER PLANT WAS DISMANTLED IN 2018 AND HAS BEEN PRESERVED IN A LOCAL SITE. THEREFORE, THEY ARE READY FOR IMMEDIATE INSPECTION AND DELIVERY AT THE CUSTOMER’S DISCRETION. ENGINE MODEL: W18V32 BRAND: WARTSILA CONTINUOUS OUTPUT: 7,050 KWE X 720 RPM FREQUENCY & VOLTAGE: 60 Hz & 13,800 VOLTS YEAR OF PRODUCTION: 2001 FUEL OIL: DIESEL OIL PLANT AUXILIARY EQUIPMENT: 1 SET RUNNING HOURS: ABOUT 35,000 HOURS QUANTITY: 5 Learn More

TT-1738 HUMMEL LNG CLEAN POWER GENERATING BARGE, 7.5MW, 50 TO 60 Hz, YEAR 2014 THE POWER BARGE WAS ORIGINALLY DEVELOPED TO ENABLE VISITING CRUISE VESSELS TO POWER DOWN MAIN ENGINES IN PORT, REDUCING FUEL USE AND POLLUTION, WHILST RETAINING FULL ELECTRICAL POWER TO ON BOARD SYSTEMS. THE BARGE IS CAPABLE OF GENERATING A TOTAL OF 7.5 MW OF POWER FROM 5 SILENT GENERATORS FED BY TWO 17T LNG CONTAINERS. THE VESSEL IS A FLOATING POWER PLANT PROVIDING CLEAN AND EFFICIENT COLD IRONING POWER TO CRUISE HARBOURS, TERMINALS AND LOCAL INFRASTRUCTURE CURRENTLY. IT CAN ACT AS A BACKUP POWER BANK TO THE LOCAL ELECTRIC AND POWER GRID, ALSO POTENTIALLY PROVIDING HEATED WATER TO LOCAL SYSTEMS. THE POWER BARGE IS CAPABLE OF GENERATING A TOTAL OF 7.5 MW OF POWER FROM 5 SILENT GENERATORS FED BY TWO 17T LNG CONTAINERS. QUANTITY: 1 Learn More

YY-2215 USED GRANUTECH SATURN MODEL 62-40 HT DUAL SHAFT SHREDDER, CUTTER DIAMETER 20.5" AT HOOKS INLET 55" X 38"; OUTSIDE DIMENSIONS ARE 130" X 61" X 43"; POWER UNIT DIMENSIONS ARE 96" X 86" X 96"; WEIGHT IS 20.000 LBS; POWER UNIT IS 8000 LBS (DRY); CUTTER SHAFT TORQUE: FAST 64.776 FT/LBS, TORQUE: SLOW 78.653 FT/LBS; CUTTER SHAFT SPEED: FAST 22, SPEED: SLOW 18; CUTTER FORCE FAST: 77.732 LBS, SLOW: 94.383 LBS; CUTTER DIAMETER 20.5" AT HOOKS; POWER UNIT OPEN LOOP, SKID MOUNTED; ELECTRICAL POWER 200 HP (2 X 100) (OPTIONAL 150-300HP); HYDRAULIC FLOW 156 GPM; QUANTITY: 1 Learn More

T-9593 CROCKMETER RUBBING FASTNESS TESTER CROCKMETER RUBBING FASTNESS TESTER SUPPLY CAPACITY 500 SETS COMES WITH A STANDARD WEIGHT (9 N) ARM THAT COMPLIES TO A VARIETY OF STANDARDS INCLUDING AATCC 8 AND 165 AND TRADITIONAL SAMPLE HOLDER. APPLICATION: CROCKMETER RUBBING FASTNESS TESTER TO DETERMINE THE COLOR FASTNESS OF TEXTILES TO DRY OR WET RUBBING. A PINNED ACRYLIC SAMPLE HOLDER ENSURES RAPID SAMPLE MOUNTING AND REPEATABILITY OF RESULTS. FEATURE: 1. METAL BOX, HIGH-TEMPERATURE BAKING COATING, EASY MAINTENANCE. 2. ELECTRIC MOTOR, FITTED WITH A PRE-DETERMINED ELECTRONIC COUNTER FOR STROKES UP TO 9999, EXPERIMENT COMPLETE SUCCESSFULLY, AUTOMATIC STOP. Learn More