Search results for: 'machine tr'[0]'

TRANSFER PRINTING RANGE, CONSISTING OF; A. JACK STAND AND STAINLESS J-SCRAY WITH EDGE SENSORS B. OPERATOR PLATFORM C. SINGER(?) TRANSFER MACHINE WITH 36" DIA. X 149" FACE WIDTH HOT-OIL CYLINDER INTERNALLY HEATED OIL BATH BY CHROMALOX ELECTRIC HEATING RODS, 126" FACE NOMEX BLANKET, CONTROLS. D. DSI A-FRAME WINDER, DIRECT COUPLING TO SPLINE SHAFT, 7.5-HP Learn More

REFERENCE NUMBER: M-4110 (1010STKMXX9) L STORK TRANSFER PRINT RANGE – 1800mm – 72” – ELECTRICAL MILL MADE SCRAY LET-OFF WITH 2 STATIONS 72” WIDE FIFE HYDRAULIC SINGLE ROLL GUIDER MENZEL BRUSH BOX TYPE 78BR 01003, YEAR 8/76 INFRARED UNIT SINGLE SIDED 4-BURNER MOUNTED OVER THE GOODS TO HEAT THEM BEFORE TRANSFER PRINTING STORK 72” HEAT TRANSFER MACHINE, ELECTRICALLY OPERATED GOODS TRAVEL OVER 2-BRUSH ROLLS WITH A VACUUM SYSTEM 54 BAGS WITH 6 DELIVERIES EXIT AND GO INTO A SMALL MILL MADE STEAM CHAMBER HOLDING APPROX. 3 – 5 YARDS ENTERING INTO A HENRY PAULUS BRUSHING UNIT, SINGLE INFRARED UNIT 2-POSITIONS STEAM PLATES FOR THIS UNIT GOODS EXIT AND GO INTO A SMALL ACCUMULATOR APPROX. 50 YARDS THEN OVER ONTO AN AFRAME WINDER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-6332 BOX MIXING TANK FOR FOAM (NEW) WITH AUTOMATIC COMPUTERIZED CHEMICAL FEED QUANTITY AVAILABLE: 1 Learn More

TT-6413 KOMATSU HD785-7 TRUCKS, YEAR 2018, WORKING HOURS ABOUT 16,000 HOURS 1. KOMASTU HD785-7 TRUCKS 2. YEAR 2018 3. 14,711 HOURS QUANTITY: 4 Learn More

YASHA LIST-1310 FOR LUMMUS COTTON GIN EQUIPMENT LIST Learn More

TT-7587 SIEMENS TG50D5/W701DS GAS TURBINE GENERATOR, 127.8 MW, YEAR 1995 1. SIEMENS WESTINGHOUSE TG50D5/W701DS 127.8 MW GAS TURBINE GENERATOR PACKAGES FOR SALE. THE TURBINE PACKAGES TOGETHER OFFER 255 MW READY TO SHIP EQUIPMENT. THIS TECHNOLOGY IS ONE OF THE MOST WIDESPREAD MIDDLE SIZE ENGINES (100-104 MW) FOR POWER GENERATION AND THE ONLY TURBINE OF ITS SIZE THAT CAN OPERATE ON HEAVY FUEL OIL (HFO). 2. THE UNITS ARE OFFERED WITH SOME OF THE REQUIRED BALANCE OF PLANT BY SEPARATE NEGOTIATION. 3. THESE UNITS WERE INSTALLED AND OPERATED IN A POWER STATION FROM 1996 UNTIL THE END OF 2004, WHEN THEY WERE DISMANTLED AS THE RESULT OF A PLANT UPGRADE. THE UNITS WERE PURCHASED AND UPGRADED BY THE BUYER TO 127.8 MW NOMINAL CAPACITY EACH. THEY ALSO FULLY REFURBISHED THE UNITS TO ZERO HOURS. THE TURBINES HAVE THE CAPABILITY OF BEING ABLE TO SWITCH BETWEEN NATURAL GAS AND LIQUID FUEL WHILE STILL OPERATING UNDER LOAD. QUANTITY: 2 Learn More

TT-7340 TETRA PAK A3 FLEX 200S ASEPTIC FILLING LINE, CAPACITY UP TO 7000 L/H, YEAR 2003 TO 2010 1. TETRA PAK A3 FLEX 200S ASEPTIC FILLING LINE 2. CAPACITY: UP TO 7000 L/H 3. USED 4. BRAND: TETRA PAK® 5. SPEED: 7000 L/H 6. PRODUCTS: DAIRY, JUICE 7. CONTAINERS: BRIK 8. FORMATS: 0.20 L 9. SAFETY FEATURES: YES 10. FILL TYPE: ASEPTIC 11. FILLING MACHINE TETRA PAK® A3 FLEX 200 ML SLIM YEAR 2006 12. STRAW APPLICATOR TETRA PAK® TETRA STRAW APPLICATOR 22 YEAR 2009 13. ACCUMULATOR TETRA PAK® ACHX30-0500-47M YEAR 2010 14. CASE PACKER TETRA PAK® CARDBOARD PACKER 70 YEAR 2003 QUANTITY: 1 Learn More

TT-7282 TETRA PAK ASEPTIC FILLING LINE A3 FLEX 200S UP TO 7000 L/H, YEAR 2003 TO 2010 1. BRAND: TETRA PAK® 2. SPEED: 7000 L/H 3. PRODUCTS: DAIRY, JUICE 4. CONTAINERS: BRIK 5. FORMATS: 0.20 L 6. SAFETY FEATURES: YES 7. FILL TYPE: ASEPTIC Learn More

TT-2982 CATERPILLAR 988K XE WHEEL LOADER, YEAR 2019 WITH 6200 HOURS CATERPILLAR 988K XE CURRENT MACHINE HOURS: 6,200 VERY CLEAN, STRAIGHT LOADER RECENTLY REPLACED TIRES QUANTITY: 1 Learn More

REFERENCE NUMBER: M-7900

PATTERN TEMPLATE SEWING MACHINE

 

PATTERN TEMPLATE SEWING MACHINE

COMPUTER-CONTROLLED, PROGRAMMABLE

MAXIMUM SPEED: 3,000 STITCHES PER MINUTE

MAXIMUM SEWING SPEED: 10 METERS PER MINUTE

MAXIMUM MOVING SPEED: 80 METERS PER MINUTE

 

QUANTITY: 1

Learn More