Search results for: 'pane'

REFERENCE NUMBER: M-5218 (131321LCJM12RX) L LORIS BELLINI HANKS DYEING MACHINES AND ALEA HANKS DRYER YEAR 1994-2001 (2) X LORIS BELLINI HANKS DYEING MACHINES IN PARALLEL MODEL APPC-LV 250 YEAR 2001 CAPACITY 300 + 300 KGS, 4 + 4 EXTRACTABLE BASKETS WITH 5 TROLLEYS, DOUBLE SET OF STICKS 336 + 336 OF 1040mm, HEAD 55mm, 2 INTRODUCTION CANS, 2 PREPARATION CANS, ELECTRIC PANEL, PLC LORIS BELLINI (1) X LORIS BELLINI HANKS DYEING MACHINE MODEL APPC-LV 125 YEAR 2001 CAPACITY 150 KGS, 2 EXTRACTABLE BASKETS WITH 2 TROLLEYS, DOUBLE SET OF STICKS 168 OF 1040mm, HEAD 55mm, 1 INTRODUCTION CAN, 1 PREPARATION CAN, ELECTRIC PANEL, PLC LORIS BELLINI (1) X LORIS BELLINI HANKS DYEING MACHINE MODEL APPC-LV 25 YEAR 2001 CAPACITY 30 KGS, 2 EXTRACTABLE BASKETS WITH 2 TROLLEYS, DOUBLE SET OF STICKS 36 OF 1040mm, HEAD 55mm, 1 INTRODUCTION CAN, 1 PREPARATION CAN (1) X ALEA HANKS DRYER MODEL MNBC/81 YEAR 1994 COMPOSED OF: INPUT, SQUEEZER, DRYING ROOM N.1, HANKS TURNING SYSTEM BETWEEN THE 2 DRYING ROOMS, EXIT, ELECTRIC PANEL – USABLE FOR STICKS 1030 TO 1040mm MACHINES SOLD TOGETHER QUANTITY: 5 Learn More

REFERENCE NUMBER: M-2077 (77082KHU6UX) ALBRECHT BAUMER IS-M VERTICAL CUTTING MACHINE WITH TURNTABLE COMPLETELY MODERNISED VERTICAL FOAM CUTTING MACHINE TYPE IS-M WITH TURNTABLE THAT IS NOW AVAILABLE. QUANTITY AVAILABLE: 1 Learn More

•PRODUCT NAME: WEIGHING DOWN & FEATHER FILLING MACHINE •TYPE: EF-1 •DIMENSION: 7500*2500*3500MM •VOLTAGE: 380V 50HZ 3PHASE •POWER: 11KW •FILLING RANGE: 2-100 G, DEPENDING ON THE MATERIAL •ACCURACY: ±0.2G，±1G，±1.5G,DEPENDING ON THE FILLING WEIGHT •AIR SUPPLY: 0.5-0.8MPA •WEIGHT: APPROX. 800KG Learn More

WITH SPECIAL DEVICE TO FIX THE COVER AND ELECTRONIC TABLE WITH BALANCE IT IS A MACHINE FOR FILLING CUSHIONS, SACS, BAGS ETC. WITH ALL KIND OF MATERIALS: FEATHER, POLYESTER, BALL FIBER, POLYURETHANE, COTTON, WOOL, ETC. ADJUSTABLE SPEED: UP TO 4000 RPM THE PARTICULAR SHAPE OF THE OUTLET PIPE ALLOWS TO FILL AIR-TIGHT LINING PILLOWS THE COMMAND TO THE DUMPERS IS GIVEN BY A PEDAL THANKS TO THE SPECIAL DEVICE TO BLOCK THE COVER, THE OPERATOR HAS BOTH HANDS FREE AND CAN WORK ON TWO POSITIONS AT A TIME WHEN THE LINE IS EQUIPPED WITH TWO FILLING MACHINES (AS PER DRAWING BELOW) CONTROL PANEL SPECIAL SEWING MACHINE Learn More

REFERENCE NUMBER: M-4558 (1111185AP10RC) L DORNIER HTVS 4/S RAPIER LOOMS YEAR 1997 WIDTH 2000mm DORNIER RAPIER LOOMS TYPE HTVS 4/S YEAR 1997 WIDTH 2000mm NOMINAL WIDTH 2000mm 8 WEFT COLORS MAXIMUM CAPACITY AT-1 CONTROL PANEL ELECTRONIC STAUBLI DOBBY 2671 – 20 SHAFT CAPACITY – 16 TO 20 SHAFTS INSTALLED ECT – ELECTRONIC TAKE UP, EWL – ELECTRONIC WARP LET-OFF, ECS – ELECTRONIC COLOR SELECTOR QUANTITY AVAILABLE: 20 Learn More

REFERENCE NUMBER: M-4566 (1111225RSJ10U) L THERMOPLASTIC HOTMELT COATING LINE MP ENGINEERING TYPE HM59-SD3 YEAR 2005 WIDTH 102” (2590mm) YEAR: 2005 TYPE: HM59-SD3 MATR: 404/04 ROLL FACE: 2600mm (102”) WORKING WIDTH: 2400mm (95”) VOLTAGE: 480/3/60 CONTROL VOLTAGE: 110/60 CONSISTING OF: CAROUSEL 3 POSITION LET-OFF, ENTRY ON ACCUMULATOR WITH HOT-WIRE SEAMING DEVICE, 8000 VOLT STATIC ELIMINATOR, PNEUMATICALLY OPERATED FABRIC HOLDING DEVICE FOR TENSION CONTROL, ACCUMULATOR WITH 8-ROLLS UP AND 9-ROLLS DOWN APPROX.. 80-YARD CAPACITY, COMPENSATING ARM ON EXIT SIDE. ROLLS ARE 4” DIA. X 102” FACE ALUMINUM, CONTROL PANEL MOUNTED ONTO FRAMEWORK, FULLY ENCLOSED CAGE. SECOND ACCUMULATOR WITH ROLL CRADLE FOR SECOND SUBSTRATE LET-OFF, ACCUMULATOR WITH 9-ROLLS UP AND 10 ROLLS DOWN, APPROX.. 54 YARD CAPACITY, ROLLS ARE 4’ DIA. X 102” FACE ALUMINUM, INCLUDES 8000 VOLT STATIC ELIMINATOR AND PNEUMATIC FABRIC HOLDING FOR TENSION, PENDULUM TYPE GUIDING DEVICE ON EXIT SIDE, CONTROL PANEL MOUNTED ONTO FRAMEWORK, FULLY ENCLOSED CAGE. OVERHEAD GANTRY WITH ACCESS STAIRS ON RIGHT SIDE OF FIRST ACCUMULATOR, EXTENDS OVER THE EXTRUDER WITH JIB MOUNTED FOR EASE IN REMOVING DIE FROM MACHINE, GUIDING/CENTERING DEVICE MOUNTED ONTO GANTRY FEEDING COATING HEAD. MP ENGINEERING EXTRUDER/APPLICATOR TYPE HM59-SD3, MATR. NO. 402/04, WITH 102” DIE, 98” RUBBER-BELT WITH PNEUMATIC CYLINDERS FOR BELT TENSION AND GUIDING, HEATED CYLINDER BACKING TO DIE, OPERATOR PLATFORM, CONTROLS MOUTNED IN DOOR AND OPERATOR TOUCH SCREEN PANEL. (NOTE: THESE ARE PRESENTLY MOUNTED ON PRODUCTION LINE AND WILL BE REMOVED AND PLACED BACK INTO/ONTO APPLICATOR. 480/3/60 COATEM SISTEMI C.R.L. IMBALLAGIO & HOT MELT EXTRUDER, S/N 50701, TYPE/MODEL CE-200, WITH DIGITAL MICROPROCESSOR AND INVERTER FOR SPEED VARIATION, DESIGNED TO WORK MAINLY WITH POLYESTER, POLYAMIDE AND POLYURETHANE BUT CAN ALSO EXTRUDE ABS, POLYTHENE, POLYPROPYLENE AND ADHESIVES LIKE EVA ADHESIVES. 480/3/60 CONAIR DRYER CD-300, PL-D-196-1, MODEL D03H4101310, S/N 9D0597, 480/3/60, AND HOPPER. THIRD ACCUMULATOR FOR BONDED PRODUCT WITH 6-ROLLS UP AND 7-ROLLS DOWN, APPROX…60-YARD CAPACITY, ROLLS ARE 6” DIA. X 102” FACE ALUMINUM, WITH DRAW-ROLL TENSION DEVICE MOUNTED ONTO EXIT, OVERHEAD CARRIER ROLLS AND FRAMEWORK DELIVERY TO ELECTRIC A-FRAME WINDER WITH 102” FACE LAY-ON ROLL, AND SEMI-AUTOMATIC BATCHER FOR INDIVIDUAL ROLLS, 2-ROLL SURFACE WINDING 102” FACE WIDTH, OVERHEAD CORE FEED, FABRIC CENTERING DEVICE, ELECTRIC SCISSOR CUT-OFF, KICK-OUT TO 2-ROLL BED, OPERATOR PLATFORM AND OPERATOR CONTROLS. ALL MACHINES PRODUCED BY MP CONFORMS TO EEC DIRECTORY 89/392 CEE (CE MARK) TECHNICAL FEATURES OF THE LINE, ACCORDING TO DWG 100-904/1C ROLLERS WIDTH 2600mm WORKING WIDTH 2400mm MAXIMUM DIAMTER OF THE ROLLS OF PU FOAM 1500mm MAXIMUM DIAMETER OF THE UNWOUND ROLLS OF FABRIC 600 ° 1500 MAXIMUM DIAMETER OF THE REWOUND ROLLS 500 ° 1500 (IN CASE YOU ARE REWINDING ROLLS OF FABRIC LAMINATED TO PU FOAM, THE MAXIMUM DIAMETER IS 1750mm) ADJUSTABLE MECHANIC SPEED: 5 TO 50 M/MIN MAIN POWER SUPPLY + NEUTRAL + EARTH 480+N+E/60 V/HZ VOLTAGE ON CONTROL PANELS 110/60 V/HZ INSTALLED POWER FOR MOTORS 22KW INSTALLED POWER FOR IR HEATER 14,25KW INSTALLED POWER TO HEAT THE SLOT-DIE 32KW INSTALLED POWER FOR THE THERMAL OIL HEATING UNIT FOR THE CALENDERING ROLLERS 32,2KW INSTALLED POWER FOR THE CHILLER 12,9KW A.C. MOTORS, DRIVER, ELECTRIC CABLES ARE ACCORDING TO CEI NORMS BACKGEAR ROLLERS, WITH PAINTED SURFACE OR ALUMINUM MADE WITH DIAMETER 100/120/150mm COMPRESSED AIR CONSUMPTION, AT 6 BAR 1500LT/H COOLING WATER CONSUMPTION (WATER MUST HAVE A TEMPERATURE NOT HIGHER THAN 10°C) 5500LT/H ADJUSTABLE TENSION ON THE REWOUND MATERIALS 5 A 35 KG. PAINTING GREEN RAL 6027 E BLUE MARINE RAL 5021 A.C. MOTORS CONTROL THE SPEED OF THE MACHINES, AND ARE AUTOMATICALLY SYNCHRONISED THROUGH ELECTRONIC DRIVES (INVERTER) AND PNEUMATIC DANCER UNITS (COMPENSTAORS) ESTRUDER: CAPACITY UP TO 200 KG/H (DEPENDING ON THE VISCOSITY OF THE ADHESIVE TO BE EXTRUDED) POWER OF THE MOTOR AND RESISTANCES: 90KW MAXIMUM MELTING TEMPERATURE: 220°C MATERIALS TO BE PROCESSED NONWOVENS 30:150 GR/M2 SYNTHETIC AND NATURAL FABRICS (EXCLUDING STRETCHY FABRICS) WITH WEIGHT 100:600 GR/M2 SCRIMS FOR BACKING FABRIC WITH WEIGHT 70:120 G/M2 MAXIMUM THICKNESS OF PU FOAM 15mm MINIMUM THICKNESS OF PU FOAM 2mm DENSITY OF PU FOAM 22/40 KG/M3 THERMOPLASTIC ADHESIVE TO BE COATED THERMOPLASTIC HOTMELTS (COPOLYAMMIDE, COPOLYESTER, EVA AND POLYURETHANE THERMOPLASTIC HOTMELT GRANULES) DATA REFERRING TO PRODUCTION THE PRODUCTION SPEED CAN CHANGE, DEPENDING ON THE KIND OF HOTMELTS, ON THEIR MELTING TEMPERATURE, ON THEIR VISCOSITY, AND ON THE GRAMS PER SQUARED METER TO BE COATED QUANTITY AVAILABLE: 1 Learn More

FIBRE OPENING/ AND MIXING LINE: 2 BALE OPENERS TYPE AC-1500, WORKING WIDTH 1500mm, INCL. FEEDING CONVEYOR. 1 BALE OPENER TYPE AS-204 (FOR MELT FIBRE DOSING), WITH ELECTRONIC WEIGHING TYPE SP-205. 1 TYPE AFM 700, WIDTH 700mm, LENGTH 7500mm. 1 MIXING OPENER TYPE AF 700, WORKING WIDTH 700mm., OPENING ROLLERS WITH NEEDLES. 1 FINE OPENER TYPE SF-1500, WORKING WITH 1500mm, 500KG/H WITH DOSING SHAFT. 1 FILTER STATION FOR TRANSPORT AIR, TYPE CF DOUBLE BAG FILTER. 1 ELECTRONIC CONTROL PANEL WITH TOUCHSCREEN. AIRLAID LINE: 1 DOSING MACHINE BEMABLOW, WORKING WIDTH 2500mm WITH ELECTRONIC CONTROLLED DOSING CAPACITY. 1 AIRLAID WEB BUILDER TYPE FORMER T-MAX WORKING WITH 2700mm WEB HEIGHT 50-350mm, WEB WEIGHT 300 TILL 300GT/M2. 1 ELECTRONIC CONTINUING BAND WEIGHING DEVICE BEMAMULTISCALE, FOR WEB FROM AIRLAID WEB BUILDER, WITH FEEDBACK TO AIRLAID MACHINE. 1 FILTER STATION FOR TRANSPORT AIR TYPE CF, DOUBLE BAG FILTER. 1 ELECTRONIC CONTROL PANEL WITH TOUCHSCREEN. SPRAYING AND DRYING. 1 PRAYING CABIN BOMBI, 2600mm WORKING WIDTH. 1 THERMOBONDING OVEN BOMBI 2012, TYPE TFP/2N/2.7M, 2 DRYING SECTIONS, GAS HEATED, INCL. CALIBRATING ZONE, 2 STATIC FILTERS, 11.0 RESP. 5.5KW, OVEN LENGTH 12000mm. 1 CALANDER BOMBI 2012, TYPE CAL/2C/2.7M. 1 COOLING SECTION BOMBI 2012, TYPE RAF. 1 LENGTH- AND CROSS CUTTER BOMBI 2012, TYPE TG2.7/2+2. 1 ELECTRONIC CONTROL PANEL/ PROGRAMMER WITH TOUCHSCREEN. - ABOVE LINE CAN PROCESS FLAX, HEMP, REGENERATED FIBRES, POLYESTER AND LOW MELT FIBRES. - PRODUCTION 500KG/H. - CONSUMPTION: GAS 45M³/H, ELECTRICITY 90KW/H. Learn More

TT-8593 GE TM2500GEN08 MOBILE GAS TURBINE GENERATOR, 10.5KV, YEAR 2025 1. GE TM2500GEN08 2. YEAR: JUNE 2025 3. 10.5KV 4. DUAL FREQUENCY 5. DUAL FUEL 6. DRY LOW EMISSION 7. HOURS: 0 8. WARRANTY: ONE YEAR QUANTITY: 1 Learn More

TT-8518 WARTSILA POWER PLANT, 168 MW, 60Hz 1. WARTSILA POWER PLANT 2. INSTALLED CAPACITY: 168 MW 3. 8 X WARTSILA W20V46F ENGINES, 600RPM, 480V, 60Hz 4. FUEL: HFO QUANTITY: 1 Learn More

YY-3584 CBD/HEMP OIL EXTRACTION INTRODUCTION THE CONTENT OF CBD OIL IN ALL PARTS OF HEMP ,USUALLY DECREASES ACCORDING TO THE ORDER OF BRACTS, FLOWERS, LEAVES, FINE STEMS AND THICK STEMS, AND THE CONTENT OF CBD IN THE FLOWERS AND LEAVES OF FEMALE FLOWERS IS THE HIGHEST, SO THE FLOWERS AND LEAVES ARE USUALLY SELECTED TO EXTRACT CBD OIL. OUR DEVELOPED HEMP OIL EXTRACTOR MACHINE (CENTRIFUGE MACHINE) IS ADAPT THE NEW TECHNOLOGY CAN TO MAKE THE EXTRACTOR TIME SHORT AND EFFICIENT EXTRACTION .THE EXTRACTOR MACHINE (CENTRIFUGE MACHINE) HAVE THE JACKET WHICH CAN KEEP THE INSIDE ETHANOL SOLUTION WITH HEMP RAW MATERIAL IN LOW TEMPERATURE. QUANTITY: 1 Learn More