Search results for: 'Edge+and'

TT-3390 STORK ENGRAVING MACHINE, MODEL BEST LEN 6412 LASER CUT, YEAR 2007 BRAND: STORK MODEL: BEST LEN 6412 LASER CUT YEAR: 2007 QUANTITY: 1 Learn More

TT-1160 RAMISCH CALANDER NIPCO STAR, YEAR 1990 RAMISCH CALANDER NIPCO STAR CALANDER TYPE NIPCO STAR YEAR OF MANUFACTURE 1990 WORKING WIDTH: 2700mm YEAR 1990 QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6544

SYNTHETIC BLOOD PENETRATION TESTER FOR SURGICAL MASK

 

TECHNICAL INDICATORS:

1. THE PROTRUDING SAMPLE FIXING DEVICE CAN SIMULATE THE ACTUAL USE STATE OF THE MASK, SET ASIDE THE TEST TARGET AREA WITHOUT DESTROYING THE SAMPLE, AND DISTRIBUTE THE SYNTHETIC BLOOD IN THE TARGET AREA OF THE SAMPLE.

2. THE SPECIAL FIXED-PRESSURE INJECTION DEVICE CAN EJECT A CERTAIN VOLUME OF SYNTHETIC BLOOD IN A CONTROLLED TIME.

3. IT CAN FULLY SIMULATE THE INJECTION SPEED CORRESPONDING TO THE AVERAGE BLOOD PRESSURE OF HUMAN BODY OF 10.6KPA, 16KPA AND 21.3KPA.

4. A FIXED TARGET PLATE IS SET TO BLOCK THE HIGH-PRESSURE EDGE PART OF THE INJECTED LIQUID FLOW AND ONLY ALLOW THE STEADY FLOW PART TO BE SPRAYED ON THE SAMPLE, WHICH INCREASES THE ACCURACY AND REPEATABILITY OF THE LIQUID VELOCITY SPRAYED ON THE SAMPLE.

 

STANDARDS:

MEDICAL RESPIRATOR TECHNICAL REQUIREMENTS, 5.5 SYNTHETIC BLOOD PENETRATION BARRIER PERFORMANCE

YY/T 0691-2008 INFECTIOUS PATHOGEN PROTECTION EQUIPMENT MEDICAL MASK RESISTANCE TO SYNTHETIC BLOOD PENETRABILITY TEST METHOD (FIXED VOLUME, HORIZONTAL INJECTION)

YY 0469-2011 MEDICAL SURGICAL MASK TECHNOLOGY REQUIRES A BLOOD PENETRATION TEST DEVICE

ISO 22609:2004 INFECTIOUS PATHOGEN PROTECTION EQUIPMENT MEDICAL MASK TEST METHOD FOR RESISTANCE TO SYNTHETIC BLOOD PENETRATION (FIXED VOLUME, HORIZONTAL INJECTION)

ASTM F1862-07 STANDARD TEST METHOD FOR RESISTANCE OF MEDICAL FACE MASKS TO BLOT BY SYNTHETIC BLOOD (HORIZONTAL PROJECTION OF FIXED VOLUME AT A KNOW VELOCITY)

 

TECHNICAL PARAMETERS:

1. INJECTION DISTANCE: 300mm ~ 305mm ADJUSTABLE

2. NOZZLE DIAMETER: 0.84mm

3. INJECTION SPEED: 450CM/S, 550CM/S, 635CM/S

4. WEIGHT: 35KG

5. POWER SOURCE: AC220V 50HZ

 

QUANTITY: 1

Learn More

M-5175 OLBRICH COATING LINE FOR MANUFACTURING TARPAULIN AND BANNER PVC COATED FABRICS 3300mm

KNIFE OVER ROLL COATING
LIST OF EQUIPMENT FOR MANUFACTURING OF PVC COATED FABRICS, LINE CAN APPLY ANY TYPE OF COATING INCLUDING WATER BASED OR SOLVENT BASED AND EITHER CLEAR COAT THE FABRIC OR SATURATE COAT ANY WOVEN FABRIC , CAN ALSO DO SUNBRELLA TYPE TECHNICAL TEXTILES
FOR ONE SIDE COATING WITH KISS COATER

MANUFACTURED BY OLBRICH GMBH (ERECTED IN 2005) 3400mm (SCRIM CAN BE 3400mm WIDTH)
CAN MAKE 3350mm COATED FABRIC AND AFTER TRIMMED EDGES HAVE A FINISHED PRODUCT OF 3300mm (BEGINNING WITH A 3400mm SCRIM , THERE ARE INBUILT CUTTING BLADES FOR TRIMMING .
MANUFACTURED IN GERMANY BEGINNING 2003 AND 2004

COATING LINE
UNWINDER
PENDULUM
WEB CONTROL UNIT
PULLING STATION
PENDULUM
HEATING ROLLER (DIAMETER 570 mm)
PLATFORM
SAWING GAUGE
DOUBLE-KNIFE (DOCTOR) VERTICAL COATING MACHINE
VERTICAL DRIER
COOLING STATION WITH ROLLER LOCK
PENDULUM
SMOOTHING ROLL
MACHINE FRAME
IDLER ROLLER BRIDGE
PULLING STATION
PLATFORM
COATING MACHINE (KNIFE-OVER-ROLL)
HORIZONTAL DRIER
COOLING STATION
IDLER ROLLER BRIDGE
PLATFORM
SMOOTHING CALENDER
SUCTION HOOD
LACQUERING MACHINE (ZIMMER)
TEMPERATURE CONTROL UNIT
DRYER
ACCUMULATOR OF FABRIC
COMPUTER WITH SOFTWARE CONTROL
(SIEMENS)
ELECTRICAL CONTROL PLANT
WEIGHT-PER-UNIT-AREA
MEASURING GAUGE (2 UNITS MAHLO)-ISOTOPE NOT INCLUDED
REWINDER
FREE STANDING SLITTER-REWINDER (SEE PHOTO ATTACHED)
TRIMMING GOUGE

PERIPHERAL EQUIPMENT
LIQUIFIED GAS EQUIPMENT RH80 (RANSOME MANUFACTURING USA)
EVAPORATOR-RANSOME (USA)
CHILLER (ITALY) WITH EXPANSION TANK
BOILER ERENSAN MODEL 2000 (ISI SANAYI A.S. TURKEY) FOR HEATING OIL WITH EXPANSION TANK.
\BOILER FOR HEATING BUILDING, NOT INCLUDED
REGENERATIVE THERMAL OXIDIZER (RTO) ENVIROLOGIC USA
12 STAINLESS STEEL CONTAINERS FOR PLASTISOL VOLUME -1 M3
VACUUM DISSOLVER (SRUGO)-2 UNITS
PIPING, EXHAUST VENT PIPES (NO BUILDING HEATING PIPES )
OVERHEAD CRANE NOT INCLUDED

FLOORSPACE OCCUPIED BY THE LINE:
LENGTH 67,125mm
WIDTH 6200mm
HEIGHT 8100mm

SPEED 3 TO 30 M/MIN

HEATING SYSTEM: OIL

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: M-5184 (1313243YS12UF) L COSMETIC COTTON PAD MAKING MACHINE (24,000PCS/H) QUANTITY AVAILABLE: 1 Learn More

BRAND: BABCOCK PRODUCTION YEAR: 1992 WORKING WIDTH: 2800mm WEAVE + KNIT FABRIC CAN BE WORKED. SPEED OF OPERATION: 0-60 METERS PER MINUTE QUANTITY: 1 Learn More

P7300 SULZER LOOM WIDTH 3300mm (130") WORKS FROM CREEL (NO WARP BEAMS) INCLUDES SPECIAL WARP DELIVERY UNITS INTEGRATED IN THE LOOM 2 COLORS CAM MOTION YEAR 2005 LOOM WERE WEAVING CONVEYOR FABRIC WITH 500 AND 1000 DENIER YARN AVAILABLE FOR EACH LOOM: -CLOTH TENSION WHILE MACHINE RUNNING, CLOTH TENSION WHILE MACHINE STOPPED, CLOTH TAKE UP SPEED -CREEL WITH 3456 POSITIONS; CREEL HELD 5 AND 10 KGS BOBBINS -TWO CENTRAL TUCK IN UNITS 40mm SELVAGE; ULTRASONIC CUTTERS FOR THE EDGES -TWO WEFT FEEDERS ROJ HD10 ONE AUTOMATIC BATCHER (CLOTH WINDER) CREEL RECEIVED CONES EITHETR 5 OR 10 KGS THE 5 KGS BOBBINS HAVE A DIAMETER OF 250mm THE HORIZONTAL GAUGE OF THE CREEL IS 265mm TO PLACE THE 10 KG BOBBINS YOU SKIP ONE POSITION THEY USED POLYESTER HIGH TENACITY FROM KOSA AND INVISTA THE CREEL COMES IN MODULES OF 1152 POSITIONS AND YOU CAN HAVE A CREEL OF 2304 OR 3456 POSITIONS THE CREEL COMES FURTHER DIVIDED IN SECTIONS OF 288 POSITIONS , ONE 1152 MODULE HAS 4 X 288 SECTIONS Learn More

TT-7949 KOMORI LS 840 P, YEAR 2007 1. KOMORI LS 840 P 2. YEAR 2007 3. IMP. 230 MILLION 4. KOMORI 8 COLOR, PERFECTOR, W/ ANILOX COATER QUANTITY: 1 Learn More

YY-3530 COLINES FILM EXTRUSION LINES, CAST FILM, MODEL ALLROLL EX 1500, YEAR 2018 1. MANUFACTURER: COLINES 2. MODEL: ALLROLL EX 1500 3. YEAR: 2018 4. NUMBER OF LAYERS: 5 QUANTITY: 1 Learn More

J-5385 SRC 590-U DUPLEX SLITTER, WEB WIDTH 63”, YEAR 2008 QUANTITY: 1 Learn More