Search results for: 'Yarn con'

REFERENCE NUMBER: K-3940

LABORATORY MULTI-FUNCTIONAL SPINNING MACHINE

 

HAS COMPACT SPINNING DEVICE TO SPIN PLIED YARN INTO FINE YARN, THROUGH DRAFTING AND RING SPINNING

 

CONTROL:TOUCH SCREEN + PLC

COMPACT SPINNING DEVICE     

NO OF SPINDLES:4/6

TWISTING DEGREE:ABOUT 200-2000 TIMES/METER

DRAFTING RANGE:ABOUT 2-50

FIBER LENGTH:22mm TO 42mm

OUTPUT:ABOUT 0.25KG-1KG

SPINDLE SPEED 12000 RPM

ROLLER SIZE:Φ25/25/25mm

RING SIZE:Φ38-45 mm

TOTAL POWER   550W

VOLTAGE:220/3×380V AC  50/60Hz

MACHINE DIMENSIONS 1000mm×800mm×1600mm

 

QUANTITY: 1

Learn More

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-2405 HLX 40 FOR CHENILLE YARN YEAR 2001 HLX 40 FOR CHENILLE YARN YEAR: 2001 EXCELLENT WORKING CONDITION QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: P-2404 HLX 40 FOR CHENILLE YARN YEAR 2007 HLX 40 FOR CHENILLE YARN YEAR: 2007 EXCELLENT WORKING CONDITION QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3150

COMPLETE OPEN END PLANT WITH 1200 ROTORS YEAR 1990-2005

 

COMPLETE OPEN END PLANT WITH 1.200 ROTORS

YEAR FROM 1990 TO 2005

 

1 LINE WORKED  100% PURE COTTON

1 LINE WORKED  100% COTTON WASTE 

PRODUCTION CAPACITY  MAX 10.000 KGS PER DAY

NE COUNTS: FROM NE 5 TO NE 30

380 VOLTS 50 HZ

 
BLOWROOM

01 TRUETZSCHLER BLENDOMAT BDT-019/2.300 , YEAR 1993, W.W. 2.300 MM
01 RIETER MONOCYLINDER B4/1, YEAR 1990

01 RIETER FEEDER B3/3R, YEAR 1990

01 RIETER UNIMIX B7/3, YEAR 1990

01 TRUETZSCHLER CAGE CONDENSER BRC01,YEAR 2005

01 TRUETZSCHLER MXU6- MULTI MIXER, YEAR 2005
01 TRUETZSCHLER MXU6- MULTI MIXER INCORPORATE WHIT CLC1, YEAR 2005

01 TRUETZSCHLER SCFO SECUROMAT FOREIGN FIBRE DETECTOR, YEAR 2005

01 TRUETZSCHLER FEEDER BOU3, YEAR 2005
01 TRUETZSCHLER CVT3 CLEANER, YEAR 1999

02  TRUETZSCHLER DX DUSTEX, YEAR 1993 AND 2005
01 JOSSI VISION SHELD, YEAR 2007

CARDS

10  TRUTZSCHLER DK 803 CARDS, YEAR  1999

TRUTZSCHLER CHUTE FEED
ALLUMINIUM FLATH
CANS DIA 1000MM X 1190MM
AUTOMATIC  CAN CHANGERS

DRAWFRAMES

02 RIETER SB 51 DRAWFRAMES, YEAR 1990
CAN DIA 600MM X 1200MM
AUTOMATIC CAN CHANGER

 

01 RIETER RSB 51 DRAWFRAMES,  YEAR 1990
CAN DIA 600MM X 1200MM
AUTOMATIC CAN CHANGER

 
01 RIETER RSB D30 DRAWFRAMES , YEAR 2001
CAN DIA 450MM X 1070MM
WITH AUTO LEVELLING AND AUTOMATIC CAN CHANGERS

 

01 RIETER RSB D35 DRAWFRAMES , YEAR 2005
CAN DIA 450MM X 1070MM
WITH AUTO LEVELLING AND AUTOMATIC CAN CHANGERS

02  VOUK  SH802 , YEAR 1994 AND 1995
CAN DIA 450MM X 1070MM
WITH AUTO LEVELLING AND AUTOMATIC CAN CHANGERS

 

OPEN END
03 SCHLAFHORST AUTOCORO OPEN END SPINNING FRAME , 2 X YEAR 2000 , 1 X YEAR 2001
TYPE ACO 288 WITH SE 11 SPINBOX , SRZ  6”
240 ROTORS , ROTOR 33/36/40 ,OPENING ROLLER TYPE B174 OR OB20
WAXING, WITH  CLEARERS COROLAB MODEL V.3.6. 2 X AUTOMATIC YARN PIECER ASW

02 SCHLAFHORST AUTOCORO OPEN END SPINNING FRAME , YEAR 1995
TYPE ACO 288 WITH SE 9 SPINBOX , SRZ  6”
240 ROTORS , ROTOR 33,OPENING ROLLER TYPE B174 OR OB20
WAXING, CLEARERS COROLAB FOREING FIBER MODEL V.3.6.U1.39 ,  2 X AUTOMATIC YARN PIECER ASW

INCLUDED IN THE PLANT

CENTRAL SUCTION
CANS

02 HORIZONTAL PRESS  RIETER A5/1, YEAR 1990 ,WHIT FASER COMPACTOR  

SPARE PARTS

CATALOGS

Learn More

REFERENCE NUMBER: P-1471 HOUGET DUESBERG BOSSON AUTOMATIC CARDING YEAR 1978 to 1979 WIDTH 2500mm HOUGET DUESBERG BOSSON AUTOMATIC CARDING YEAR: 1978 to 1979 WIDTH: 2500mm TYPE: AA.201 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: P-1470 HOUGET DUESBERG BOSSON AUTOMATIC CARDING YEAR 1982 WIDTH 2500mm HOUGET DUESBERG BOSSON AUTOMATIC CARDING YEAR: 1982 WIDTH: 2500mm TYPE: GALAXY AS.202 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5332 (22035ZNT1UF) L SSM DP1-W WINDER FOR YARN DYEING WITH 60 POSITIONS YEAR 1998 USED SSM WINDER FOR YARN DYEING PLANT BRAND: SSM WINDER TYPE: DP1-W YEAR: 1998 60 POSITIONS THE MACHINE WORKS WITH CONE AND WITH TUBS OF 233mm LENGTH QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-1142 HBD WOOLEN YARN CARDING MACHINE TYPE GALAXY, YEAR 1978 TO 1979, WIDTH 2500MM SPECIFICATIONS: WOOLEN YARN CARDING MACHINE HDB TYPE GALAXY 2500 MM WORKING WIDTH YEAR OF CONSTRUCTION 1978 TO 1979 THE MACHINE COMES WITH FEEDING CHUTE LARGE HOPPER FEEDER TYPE BTT 4 AND SERVOLAP CONTROL QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-1141 HBD WOOLEN YARN CARDING MACHINE GALAXY, YEAR 1982, WIDTH 2500 MM, WITH 176 GOOD ENDS SPECIFICATIONS: 2500MM WORKING WIDTH YEAR OF CONSTRUCTION 1982 THE MACHINE IS COMPLETE WITH FEEDING CHUTE LARGE SIZE HOPPER FEEDER AND SERVOLAP CONTROL. THE TEARING CARD HAS 3 INFEED ROLLERS, 1 PRE ROLLER, 1 WORKER, 1 TURNER, 1 TRANSFER ROLLER, 1 PRE DRUM, 3 WORKER, 3 TURNER, 1 TRANSFER ROLLER, 1 MAIN TAMBOUR, 4 WORKER, 4 TURNER, 1 RUNNER, 2 DUST TURNER, 1 TAKE-OFF. TRANSFER WITH LAYDOWN. THE PRE SPINNING CARD IS WITH 4 INFEED ROLLER, 1 STRIPPER ROLLER, 1 PRE ROLLER, 1 WORKER, 1 TURNER, 1 TRANSFER ROLLER. 1 PRE CARD WITH 4 WORKER, 4 TURNER, 1 RUNNER, 2 DUST TURNER, 1 TAKE-OFF, 1 TRANSFER ROLLER. 1 MAIN DRUM, 5 WORKER, 5 TURNER, 1 RUNNER, 2 DUST TURNER, 1 TAKE-OFF, 1 TAKE-OFF CLEARER. PILE DIVIDER TYPE MB, WITH SPOOL FRAME TYPE II, DOUBLE NITSCHEL, 176 GOOD ENDS, DISTRIBUTED ONTO 16 PRE YARN ROLLERS OF EACH 11 THREADS, 12,7 MM. QUANTITY AVAILABLE: 1 Learn More