Search results for: 'cable s'

REFERENCE NUMBER: K-0593 DIGITAL DISPLAY ELECTRONIC UNIVERSAL TENSION TESTING MACHINE MAINLY APPLICABLE TO METALLIC, NONMETALLIC AND COMPOSITES TO TEST MECHANICAL PROPERTIES SUCH AS TENSION, COMPRESSION AND BENDING, ETC PRECISE AUTO CONTROL AND DATA ACQUISITION SYSTEM CAN REALIZE FULL DIGITAL ADJUSTMENT TO DATA ACQUISITION AND CONTROL PROCEDURE DURING TENSILE TEST, IT CAN TEST MAX. TENSION, TENSILE STRENGTH, ELONGATION STRAIN, ELONGATION, ETC ALL THESE PARAMETERS CAN BE AUTOMATICALLY CALCULATED THROUGH MAIN CONTROLLER ACCORDING TO TEST PARAMETERS WHICH ARE SET BEFORE TEST AND MEANTIME DISPLAY TEST RESULTS ALL TEST PARAMETERS CAN BE BOTH INQUIRED AND DISPLAYED AFTER TEST AND ALSO CAN BE PRINTED. THIS MACHINE IS ALSO APPLICABLE TO CEMENTING COMPOUND, TUBES, PIPES, AEROSPACE, PETROCHEMICAL INDUSTRY, WATERPROOF ROLLS, WIRES AND CABLES, TEXTILE, FIBERS, RUBBER, CERAMICS, FOOD, MEDICAL PACKING, GEOTEXTILE, FILM, WOOD, PAPER AND OTHER MANUFACTURING INDUSTRIES AND QUALITY SUPERVISION DEPARTMENTS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-1384 VERTICAL SEMIAUTOMATIC FOAM CUTTING MACHINE MODEL BF 2200 WORKING TABLE ON THE RIGHT OF BLADE 2200mm (86.6") WORKING TABLE ON THE LEFT OF BLADE 1280mm (50") WORKING CUTTING LENGTH 2400mm (94.4") WORKING CUTTING HEIGHT 1300mm (51") HEADBOARD HEIGHT 1250mm (49") QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-6361 FIDES ASSEMBLER YEAR 1998-16 JAWS HELICAL MOTOR (2) T80-C4 MOTOVARIO 220 V 4.4 AMPS. 60 HZ 0.92 KW 1410 KWM MGM BA80B4 ASSEMBLER MOTOR 220 V 4.9 AMPS. 60 HZ 0.75 KW 1400 RPM AIR CONSUMPTION AT 6 BAR N / A CONNECTION CABLE 4 X 21.15 MM2 AIR PIPE ½ "NPT LUBRICATING OIL DEPOSIT 4 LITRE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5221 (1313565TNY12RX) L
NONWOVEN LINE WIDTH 2500mm

CARD FEEDING
CARDING

QUANTITY AVAILABLE: 1

Learn More

REFERENCE NUMBER: M-4089 (990DJSKXX8) L

COMPLETE RIETER RING SPINNING & YARN DYE FACTORY – 37,056 SPINDLES- will sell individually

 

FACTORY WAS PRODUCING VARIOUS SPECIALTY YARNS FOR USE IN APPAREL AND TECHNICAL TEXTILES

ALL RING FRAMES SHORT STAPLE FOR FIBERS UP TO 40mm, 220mm TUBES, APPROXIMATELY HALF OF THE RING FRAMES ARE WITH PINTER CORE DEVICE OR AMSLER SLUBBING DEVICE. AMSLER AND PINTER AVAILABLE TO SELL SEPARATELY.

 

CARDING

COMBERS

ROVING/FLYERS

RING SPINNING

WINDING

TWISTING

COMPLETE YARN DYE HOUSE & DYE LAB

 

QUANTITY AVAILABLE: 1

Learn More

WORKING WIDTH: 3.200 mm WEIGHT: 100 – 1000 G/M² CAPACITY: 600 KG/H COMPOSED OF: CARDING MACHINE CROSSLAPPER QUILT MACHINE THERMOSETTING OVEN 4X BURNER FOR AIR HEATING AND CIRCULATION SYSTEM 4X FAN WINDER ELECTRIC SYSTEM PIPING Learn More

REFERENCE NUMBER: M-1530 (660EUSJXX5) DILO DI-LOOP YEAR 1995 WIDTH 5500mm DILO STRUCTURING NEEDLE LOOM MAKE: DILO TYPE: DI-LOOP VS 55 WORKING WIDTH: 5.500mm Y.O.C.: 1995 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4566 (1111225RSJ10U) L THERMOPLASTIC HOTMELT COATING LINE MP ENGINEERING TYPE HM59-SD3 YEAR 2005 WIDTH 102” (2590mm) YEAR: 2005 TYPE: HM59-SD3 MATR: 404/04 ROLL FACE: 2600mm (102”) WORKING WIDTH: 2400mm (95”) VOLTAGE: 480/3/60 CONTROL VOLTAGE: 110/60 CONSISTING OF: CAROUSEL 3 POSITION LET-OFF, ENTRY ON ACCUMULATOR WITH HOT-WIRE SEAMING DEVICE, 8000 VOLT STATIC ELIMINATOR, PNEUMATICALLY OPERATED FABRIC HOLDING DEVICE FOR TENSION CONTROL, ACCUMULATOR WITH 8-ROLLS UP AND 9-ROLLS DOWN APPROX.. 80-YARD CAPACITY, COMPENSATING ARM ON EXIT SIDE. ROLLS ARE 4” DIA. X 102” FACE ALUMINUM, CONTROL PANEL MOUNTED ONTO FRAMEWORK, FULLY ENCLOSED CAGE. SECOND ACCUMULATOR WITH ROLL CRADLE FOR SECOND SUBSTRATE LET-OFF, ACCUMULATOR WITH 9-ROLLS UP AND 10 ROLLS DOWN, APPROX.. 54 YARD CAPACITY, ROLLS ARE 4’ DIA. X 102” FACE ALUMINUM, INCLUDES 8000 VOLT STATIC ELIMINATOR AND PNEUMATIC FABRIC HOLDING FOR TENSION, PENDULUM TYPE GUIDING DEVICE ON EXIT SIDE, CONTROL PANEL MOUNTED ONTO FRAMEWORK, FULLY ENCLOSED CAGE. OVERHEAD GANTRY WITH ACCESS STAIRS ON RIGHT SIDE OF FIRST ACCUMULATOR, EXTENDS OVER THE EXTRUDER WITH JIB MOUNTED FOR EASE IN REMOVING DIE FROM MACHINE, GUIDING/CENTERING DEVICE MOUNTED ONTO GANTRY FEEDING COATING HEAD. MP ENGINEERING EXTRUDER/APPLICATOR TYPE HM59-SD3, MATR. NO. 402/04, WITH 102” DIE, 98” RUBBER-BELT WITH PNEUMATIC CYLINDERS FOR BELT TENSION AND GUIDING, HEATED CYLINDER BACKING TO DIE, OPERATOR PLATFORM, CONTROLS MOUTNED IN DOOR AND OPERATOR TOUCH SCREEN PANEL. (NOTE: THESE ARE PRESENTLY MOUNTED ON PRODUCTION LINE AND WILL BE REMOVED AND PLACED BACK INTO/ONTO APPLICATOR. 480/3/60 COATEM SISTEMI C.R.L. IMBALLAGIO & HOT MELT EXTRUDER, S/N 50701, TYPE/MODEL CE-200, WITH DIGITAL MICROPROCESSOR AND INVERTER FOR SPEED VARIATION, DESIGNED TO WORK MAINLY WITH POLYESTER, POLYAMIDE AND POLYURETHANE BUT CAN ALSO EXTRUDE ABS, POLYTHENE, POLYPROPYLENE AND ADHESIVES LIKE EVA ADHESIVES. 480/3/60 CONAIR DRYER CD-300, PL-D-196-1, MODEL D03H4101310, S/N 9D0597, 480/3/60, AND HOPPER. THIRD ACCUMULATOR FOR BONDED PRODUCT WITH 6-ROLLS UP AND 7-ROLLS DOWN, APPROX…60-YARD CAPACITY, ROLLS ARE 6” DIA. X 102” FACE ALUMINUM, WITH DRAW-ROLL TENSION DEVICE MOUNTED ONTO EXIT, OVERHEAD CARRIER ROLLS AND FRAMEWORK DELIVERY TO ELECTRIC A-FRAME WINDER WITH 102” FACE LAY-ON ROLL, AND SEMI-AUTOMATIC BATCHER FOR INDIVIDUAL ROLLS, 2-ROLL SURFACE WINDING 102” FACE WIDTH, OVERHEAD CORE FEED, FABRIC CENTERING DEVICE, ELECTRIC SCISSOR CUT-OFF, KICK-OUT TO 2-ROLL BED, OPERATOR PLATFORM AND OPERATOR CONTROLS. ALL MACHINES PRODUCED BY MP CONFORMS TO EEC DIRECTORY 89/392 CEE (CE MARK) TECHNICAL FEATURES OF THE LINE, ACCORDING TO DWG 100-904/1C ROLLERS WIDTH 2600mm WORKING WIDTH 2400mm MAXIMUM DIAMTER OF THE ROLLS OF PU FOAM 1500mm MAXIMUM DIAMETER OF THE UNWOUND ROLLS OF FABRIC 600 ° 1500 MAXIMUM DIAMETER OF THE REWOUND ROLLS 500 ° 1500 (IN CASE YOU ARE REWINDING ROLLS OF FABRIC LAMINATED TO PU FOAM, THE MAXIMUM DIAMETER IS 1750mm) ADJUSTABLE MECHANIC SPEED: 5 TO 50 M/MIN MAIN POWER SUPPLY + NEUTRAL + EARTH 480+N+E/60 V/HZ VOLTAGE ON CONTROL PANELS 110/60 V/HZ INSTALLED POWER FOR MOTORS 22KW INSTALLED POWER FOR IR HEATER 14,25KW INSTALLED POWER TO HEAT THE SLOT-DIE 32KW INSTALLED POWER FOR THE THERMAL OIL HEATING UNIT FOR THE CALENDERING ROLLERS 32,2KW INSTALLED POWER FOR THE CHILLER 12,9KW A.C. MOTORS, DRIVER, ELECTRIC CABLES ARE ACCORDING TO CEI NORMS BACKGEAR ROLLERS, WITH PAINTED SURFACE OR ALUMINUM MADE WITH DIAMETER 100/120/150mm COMPRESSED AIR CONSUMPTION, AT 6 BAR 1500LT/H COOLING WATER CONSUMPTION (WATER MUST HAVE A TEMPERATURE NOT HIGHER THAN 10°C) 5500LT/H ADJUSTABLE TENSION ON THE REWOUND MATERIALS 5 A 35 KG. PAINTING GREEN RAL 6027 E BLUE MARINE RAL 5021 A.C. MOTORS CONTROL THE SPEED OF THE MACHINES, AND ARE AUTOMATICALLY SYNCHRONISED THROUGH ELECTRONIC DRIVES (INVERTER) AND PNEUMATIC DANCER UNITS (COMPENSTAORS) ESTRUDER: CAPACITY UP TO 200 KG/H (DEPENDING ON THE VISCOSITY OF THE ADHESIVE TO BE EXTRUDED) POWER OF THE MOTOR AND RESISTANCES: 90KW MAXIMUM MELTING TEMPERATURE: 220°C MATERIALS TO BE PROCESSED NONWOVENS 30:150 GR/M2 SYNTHETIC AND NATURAL FABRICS (EXCLUDING STRETCHY FABRICS) WITH WEIGHT 100:600 GR/M2 SCRIMS FOR BACKING FABRIC WITH WEIGHT 70:120 G/M2 MAXIMUM THICKNESS OF PU FOAM 15mm MINIMUM THICKNESS OF PU FOAM 2mm DENSITY OF PU FOAM 22/40 KG/M3 THERMOPLASTIC ADHESIVE TO BE COATED THERMOPLASTIC HOTMELTS (COPOLYAMMIDE, COPOLYESTER, EVA AND POLYURETHANE THERMOPLASTIC HOTMELT GRANULES) DATA REFERRING TO PRODUCTION THE PRODUCTION SPEED CAN CHANGE, DEPENDING ON THE KIND OF HOTMELTS, ON THEIR MELTING TEMPERATURE, ON THEIR VISCOSITY, AND ON THE GRAMS PER SQUARED METER TO BE COATED QUANTITY AVAILABLE: 1 Learn More

HIGH EFFICIENCY 80 SPRINGS/MIN PS-HX POCKET SPRING MACHINE ELECTRONICALLY CONTROLLED COILING HEAD COMPUTERIZED SPRING DIMENSION SETTING SYSTEM COMPUTERIZED VARIOUS SPRING DATA SAVING SYSTEM AUTOMATIC POCKET STRINGS CUTTING DEVICE ACCURATE SERVO SPRING CONVEYOR SYSTEM INTELLIGENTLY AUTOMATIC ALARM SYSTEM FLEXIBLE HEAT TREATMENT DEVICE SMART JOINT DEVICE FOR NON-WOVEN FABRIC ROLL VARIOUS CUSTOMIZED ULTRASONIC WELDING SEAM LOW AND EASY MAINTENANCE SPRING TYPE: BARREL/CYLINDRICAL AIR CONSUMPTION: APPROXIMATELY 30M3/H AIR PRESSURE: 0.6 TO 0.7 MPA POWER CONSUMPTION IN TOTAL APPROXIMATELY 14KW VOLTAGE: 3AC, 380V – FREQUENCY: 50/60HZ POWER REQUIREMENTS: INPUT FUSE: 30A – CABLE SECTION: 4 X 10mm2 WORKING TEMPERATURE: +5°C +45°C WEIGHT APPROXIMATELY 2300KG SPECIAL OPTIONS, IF DESIRED: ZONING POCKET STRING IS POSSIBLE, AVAILABLE FOR SPRINGS IN HOUR-GLASS SHAPE, PYRAMID, PPS TYPE AND SO ON NON-WOVEN FABRIC CONSUMPTION MATERIAL DATA FABRIC DENSITY: 65~90G/M2 FABRIC WIDTH: 450 TO 600mm INNER DIAMETER OF FABRIC ROLL MINIMUM 60mm OUTSIDE DIAMETER OF FABRIC ROLL MAXIMUM 600mm STEEL WIRE CONSUMPTION MATERIAL DATA WIRE GAUGE: 1.6 TO 2.1mm INNER DIAMETER OF WIRE ROLL MINIMUM 320mm OUTSIDE DIAMETER OF WIRE ROLL MAXIMUM 1000mm ACCEPTABLE WEIGHT OF WIRE ROLL MAXIMUM 800KG WORKING RANGE (mm) STANDARD OPTION 1 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 80~140 STANDARD OPTION 2 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 120~180 STANDARD OPTION 3 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 80~140 STANDARD OPTION 4 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 120~180 STANDARD OPTION 4 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 140~200 SPECIAL OPTION 1 WIRE GAUGE: Ø1.3~ Ø1.6 SPRING WAIST DIAMETER: Ø45~ Ø55 POCKET SPRING HEIGHT: 70~120 SPECIAL OPTION 2 WIRE GAUGE: Ø1.3~ Ø1.6 SPRING WAIST DIAMETER: Ø45~ Ø55 POCKET SPRING HEIGHT: 120~180 SPECIAL OPTION 3 WIRE GAUGE: Ø1.0~ Ø1.4 SPRING WAIST DIAMETER: Ø37~ Ø45 POCKET SPRING HEIGHT: 120~180 SPECIAL OPTION 4 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø50~ Ø60 POCKET SPRING HEIGHT: 180~230 SPECIAL OPTION 5 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø60~ Ø70 POCKET SPRING HEIGHT: 180~230 SPECIAL OPTION 6 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø50~ Ø60 POCKET SPRING HEIGHT: 220~260 SPECIAL OPTION 7 WIRE GAUGE: Ø1.6~ Ø2.1 SPRING WAIST DIAMETER: Ø60~ Ø70 POCKET SPRING HEIGHT: 220~260 Learn More

PS-90P POCKET SPRING MACHINE COMPUTERIZED OPERATION SYSTEM REMOVABLE INDEPENDENT HEAT TREATMENT DEVICE CHANGEABLE VERTICAL SPRING TRANSFER STRUCTURE VARIOUS CUSTOMIZED ULTRASONIC WELDING SEAM LOW AND EASY MAINTENANCE, ECONOMICAL INVESTMENT PERFORMANCE: 48 SPRINGS/MIN SPRING TYPE: BARREL/CYLINDRICAL AIR CONSUMPTION: APPROXIMATELY 30M3/H AIR PRESSURE: 0.6 TO 0.7 MPA POWER CONSUMPTION IN TOTAL APPROXIMATELY 10KW VOLTAGE: 3AC, 380V – FREQUENCY: 50/60HZ POWER REQUIREMENTS: INPUT FUSE: 25A – CABLE SECTION: 4 X 10mm2 WORKING TEMPERATURE: +5°C +45°C WEIGHT APPROXIMATELY 1800KG NON-WOVEN FABRIC CONSUMPTION MATERIAL DATA FABRIC DENSITY: 45~90G/M2 FABRIC WIDTH: 450 TO 600mm INNER DIAMETER OF FABRIC ROLL MINIMUM 60mm OUTSIDE DIAMETER OF FABRIC ROLL MAXIMUM 600mm STEEL WIRE CONSUMPTION MATERIAL DATA WIRE GAUGE: 1.6 TO 2.2mm INNER DIAMETER OF WIRE ROLL MINIMUM 320mm OUTSIDE DIAMETER OF WIRE ROLL MAXIMUM 1000mm ACCEPTABLE WEIGHT OF WIRE ROLL MAXIMUM 800KG WORKING RANGE STANDARD OPTION 1 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 80~140 STANDARD OPTION 2 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 100~160 STANDARD OPTION 3 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 120~180 STANDARD OPTION 4 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 140~200 STANDARD OPTION 5 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 80~140 STANDARD OPTION 6 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 100~160 STANDARD OPTION 7 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 120~180 STANDARD OPTION 8 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 140~200 SPECIAL OPTION 1 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 200~240 SPECIAL OPTION 2 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 240~260 Learn More