Search results for: 'generator 3.8'

R-3246 STA RE-5 CONVECTION ROASTER - 5 KILOS

THIS IS A REALLY GREAT ROASTER - ESPECIALLY FRIENDLY TO BLENDS AS IT CREATES A VERY EVEN ROAST WITH NO TIPPING OR SCORCHING. THIS IS A BRAND THAT IS MORE KNOWN IN ITALY - BUT THE STA ROASTING GROUP HAS A HISTORY OF PRINCIPALS WITH LOTS OF ROASTING MACHINERY BACKGROUND. THUS THEIR CHANGES ARE MORE TECHNICALLY ADVANCED AND NOT SO MUCH FOR COSMETICS.

FEATURES:
SINGLE PHASE
FOUR MOTORS
AUTOMATIC GAS BURNER TWO FANS (COOLING AND CHAFF COLLECTION)
CHAFF COLLECTION CHAMBER
CAPACITY IS 20 KG PER HOUR.
LOCATED IN CROATIA

TECHNICAL DATA:
CHARGE HOPPER OF CHARGE IN STAINLESS STEEL
ROASTING DRUM IS PERFORATED FOR MAXIMUM AIR CONTROL
HEATING IS HOT CONVECTION AIR GENERATOR OF NEW GENERATION
RAMP VALVES FOR GAS SAFETY AND ELECTRIC DEVICE TO CHECK FLAMES RATIFIED AND COMPLETE OF ALARM SIGNAL - COOLING TRAY IN STAINLESS STEEL
SAFETY PREVENTION SYSTEM ON THE COOLING TRAY
ELECTRIC CONTROL BOARD TO CHECK AND CONTROL THE MACHINE ACCORDING CE RULES, INTEGRATED COMPLETE OF THERMO-REGULATOR DEVICE FOR BURNER MANAGEMENT AND DISPLAY FOR TEMPERATURES SIGHT
INDEPENDENT FANS FOR THE ROASTING DRUM AND THE COOLING TRAY
INDEPENDENT MOTORS FOR THE ROASTING DRUM AND THE COOLING TRAY
CYCLONE FOR CHAFF COLLECTING
SEMIAUTOMATIC MANAGEMENT OF THE ROASTING CYCLE.
FUEL: NATURAL GAS OR PROPANE
HEATING CONVECTION SYSTEM:
PATENTED SYSTEM BY STA IMPIANTI. THIS SYSTEM ALLOWS SHORTER AND HOMOGENEOUS ROASTING TIME:
BY CONVECTION OF HOT AIR FLOWING THROUGH THE COFFEE IN THE DRUM.
BY CONDUCTION (LIMITED AMOUNT ONLY) DUE TO THE HEATED AIR HITTING THE PERFORATED ROASTING DRUM.
BY RADIANCE FROM THE GRATE LOCATED BETWEEN THE FLAME AND THE ROASTING DRUM (INFRARED RAYS).

SPECS:
ROASTER CAPACITY: 5 STANDARD 7 MAX TO KILOS PER CYCLE
INDICATIVE ROASTING CYCLE: 9 ÷ 20 MINUTES
INSTALLED POWER: 0,9 KW
THERMAL POWER: 10 KW
WEIGHT: 170 KG
DIMENSIONS: 850mm (34") L X 1150mm (45") W X 1530mm H (60")

QUANTITY: 1

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

C-2575 WARTSILA GENERATORS, YEAR 1994 TO 2012

ITEM 001
WARTSILA W 20V
MODEL: W 20V
OUTPUT (MW): 8.8
NATURAL GAS
COMPLETE POWER PLANT
11 KV
INCL. 4
STEAM BOILERS WITH 13 BAR
AND 4.7 T/H COOLERS
TRANSFORMERS
50 HZ
34 SG
YEAR: 2005
RUNNING HOURS: 50000
GOOD CONDITION

QUANTITY: 4

ITEM 002
WARTSILA W20
MODEL: W20
OUTPUT (MW): 8.7
DUAL FUEL ENGINES
50 HZ
V34 DF
YEAR: 2012
RUNNING HOURS: ZERO
NEW

QUANTITY: 6

ITEM 003
WARTSILA 8L32
MODEL: 8L32
OUTPUT (MW): 3.84
HFO ENGINE
YEAR: 2009
RUNNING HOURS: ZERO

QUANTITY: 6

ITEM 004
WARTSILA 33V16S6D
MODEL: 33V16S6D
OUTPUT (MW): 2
DIESEL ENGINE
50 HZ
YEAR: 1994
RUNNING HOURS: 7597

QUANTITY: 1

ITEM 005
WARTSILA SACM SDRG 150 V12 S4D
MODEL: SACM SDRG 150 V12 S4D
OUTPUT (MW): 0.53
DIESEL ENGINE
50 HZ
YEAR: 1996
RUNNING HOURS: 560

QUANTITY: 1

REFERENCE NUMBER: M-6092
ETHYLENE OXIDE STERILIZER

STERILIZING TEMPERATURE: 0~100°C, PID ADJUSTABLE
STERILIZING PRESSURE: -95~+80KPA
STERILIZING HUMIDITY: 20~100% RH, ADJUSTABLE
EO CONCENTRATION: 300~1,000 MG/L
STERILIZING TIME: 3~12 HRS