Search results for: 'steam ca''

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-3844

FERRARO CALENDER FOR KNITS

MODEL: C2/IFV

YEAR: 1991

QUANTITY: 1

Learn More

REFERENCE NUMBER: M- 3405 (880160LMW7RM) K KUSTERS THERMOSOL DYEING MACHINE YEAR 1993 WIDTH 1800mm KUSTERS THERMOSOL DYEING MACHINE YEAR 1993 - TOTAL WIDTH 1800mm - FABRIC WIDTH 1600 mm - INITIAL DRYER 3 SECTIONS – ELECTRIC HEATING - DRYER 3 SECTIONS – STEAM HEATED ( 5 BARS) - THERMOSOL 2 SECTIONS – GAS HEATED QUANTITY AVAILABLE: 1 Learn More

TT-8694 A1 TETRA PAK ASEPTIC 16400 BPH FILLING MACHINE, YEAR 2006 1. FILLING MACHINE 2. BRAND: TETRA PAK® 3. MODEL: A1-TETRA CLASSIC ASEPTIC (TCA) 4. YEAR: 2006 5. SPEED: 16400 BOXES/HOUR 6. PRODUCTS: DAIRY, JUICE Learn More

TT-8635 BOSCH 145A CONTINUOUS COOKER, CAPACITY 750 KGS PER HOUR, YEAR 1974 1. TYPE 145 A 2. CAPACITY: UP TO 750 KGS PER HOUR (6 TONS IN 8 HOURS) 3. FULLY AUTOMATIC VACUUM COOKING PLANT TYPE 145A FOR THE PRODUCTION OF HIGH-BOILING MASSES “ALSO HIGH-BOILED MILK CARAMEL” OF THE HIGHEST QUALITY, EXTREMELY SMOOTH, AND EXCEPTIONALLY CLEAR. 4. BRAND: BOSCH 5. MODEL: 145 A 6. YEAR: 1974 QUANTITY: 1 Learn More

TT-8042 SCHIAVI-CONCORDE ROTOGRAVURE-PRESS, 6 COLORS, YEAR 1991 RETROFIT 2020 AND 2024 1. SCHIAVI-CONCORDE ROTOGRAVURE-PRESS 2. YEAR:1991 3. RETROFIT: 2020 AND 2024 4. PRINTING UNITS 6 5. PRINT WIDTH MAX.: 1050mm Learn More

TT-8041 WINDMOLLER+HOLSCHER ROTOGRAVURE-PRESS, WIDTH 1020mm, YEAR 1985 1. WINDMOLLER+HOLSCHER ROTOGRAVURE-PRESS 2. TYPE: MERKUR 1950 3. YEAR OF CONSTRUCTION: 1985 4. MAX SPEED: 250M/MIN Learn More

TT-7853 SIEMENS SGT600DLE GAS TURBINE - NEW, 50Hz, 25MW, YEAR 2011 1. SIEMENS SGT600DLE GAS TURBINE 2. MODEL: SGT600DLE 3. DUAL SHAFTS 4. EMISSION TYPE: DLE (DRY LOW EMISSION) 5. MADE IN SEWDEN 6. YEAR: 2011 QUANTITY: 1 Learn More

TT-7729 VARIOUS FINISHING MACHINES, YEAR 1971 TO 2021 Learn More

TT-7760 GE MODEL 7EA 62,480 KW BASE RATED, 80,000 KW ISO RATED, COMBUSTION TURBINE GENERATOR SET, 60 Hz, YEAR 2007 SCOPE OF SUPPLY 1. HP/LP STEAM DRUMS 2. HEAT TRANSFORMER MODULES 3. DEAERATOR SYSTEM 4. DUCT BURNER SYSTEM 5. ISOLATION, VENT & DRAIN VALVES 6. HP/LP FLOW ELEMENTS 7. LADDERS AND WALKWAYS 8. FIELD ASSEMBLY FITTINGS 9. EXCLUDED 10. EMISSIONS CONTROL 11. BOILER FEED WATER PUMP 12. EXHAUST STACK 13. TRANSITION DUCTS QUANTITY: 1 Learn More