Search results for: 'Power''

REFERENCE NUMBER:  G-3651-A

POCKET SPRING ASSEMBLY MACHINES (NEW): 

07A  MANUAL POCKET SPRING ASSEMBLING MACHINE

MANUAL POCKET SPRING ASSEMBLING MACHINE, MAINLY USE FOR ASSEMBLING DIFFERENT SIZE OF MATTRESS INNER. MANUEL INPUT THE SPRING LINE ON TO PRESS BOARD SPRAY OVERTURN PRESS, WHOLE ACTION WILL BE FINISHED AUTOMATIC. EASY CONTROL, HIGHLY EFFICIENCY.

DIMENSIONS: 3500MM×1640MM×1580MM

SPRING HEIGHT: 125-180MM

SPRING DIAMETER: ∮50-∮80MM

MAX WORKING WIDTH: 32PCS OF SPRING

GLUING TYPE: LINE/POINT

NON-WOVEN WIDTH: ≤2200MM

NON-WOVEN: ≥50G/M2

AIR PRESSURE: 6KGS/

MAX NON-WOVEN DIAMETER: ∮400MM

WORKING EFFICIENCY: 3ROWS/MIN(32COILS/ROW)

POWER: 4.5KW

WEIGHT: 880KG

REFERENCE NUMBER:  G-3652-C

AUTOMATIC POCKET SPRING MACHINES

MODEL 08P  AUTOMATIC POCKET SPRING MACHINE

WITH TWO SIDE OVERLAP WELDING BY ULTRASONIC UNIT IN THE MIDDLE OF THE POCKET. THE COIL SPRING IS STRONGER AND MORE DURABLE.  ONE ULTRASONIC UNIT SO THE COST IS REDUCED.  SERVO MOTOR CONTROL.

DIMENSIONS: 3400mm(L)×1160mm(W)×1600mm(H)

OUTPUT: 65 COILS PER MIN

TYPE OF SPRING              

NON-WOVEN: 65-100G/M2

NON-WOVEN ROLL DIAMETER: 500mm

SPRING DIAMETER: ∮1.8 PER∮2.2mm

SPRING HEIGHT (AFTER POCKETED): 125mm-180mm

WEIGHT: 1600kg

SPRING DIAMETER: ∮60mm TO∮75mm

SPRING CIRCLE: 6.5-9 CIRCLES

VOLTAGE: AC 3 PHASE 380V

POWER: 16KW

AIR PRESSURE: 6KGS/CM3

REFERENCE NUMBER:  G-3653

AUTOMATIC POCKET SPRING PRODUCTION LINE

MODEL 08PA AUTOMATIC POCKET SPRING PRODUCTION LINE

MAIN PARAMETER:

PART OF MACHINE: SL-08P+SL-08A

DIMENSIONS(L×W×H): 9.75×1.4×1.85M (EXCEPT THE WORKTABLE)

COIL SHAPE: CYLINDRICAL OR BARREL 

SPRING DIAMETER: TOP & BOTTOM Φ45-60Mmm CENTER Φ60-80mm

SPRING HEIGHT (INSIDE THE NON-WOVEN): 130 TO 180mm

STEEL WIRE DIAMETER: Φ1.8 TO Φ2.2Mmm

POCKETED WIDTH OF NON-WOVEN FABRIC: 410 TO 520mm

TYPE OF SEALING: ULTRASONIC

PRODUCTION: 65 PCS/MINUTE

POWER REQUIREMENT: 21 KW

COMPRESSED AIR PRESSURE: 6KGS/CM³

WEIGHT: APPROX. 3.3 TONS

REFERENCE NUMBER:  G-3980

MANUAL POCKET SPRING ASSEMBLY MACHINE

THIS MACHINE CAN MAKE BOTH SIDE BY SIDE AND CROSS ASSEMBLING

DIMENSIONS: 3500mm×1425mm x 1400mm（EXCEPT THE WORKTABLE）

SPRING HEIGHT: 125 TO 180mm

SPRING DIAMETER: Ø50 TO Ø80mm

MAX WORKING WIDTH: 32 PCS OF SPRING

GLUING TYPE: LINE OR POINT

NON-WOVEN WIDTH: ≤2200mm

NON-WOVEN: ≥50G/M²

AIR PRESSURE: 6KGS/CM3

MAX NON-WOVEN DIAMETER: Ø400mm

WORKING EFFICIENCY: 3 ROWS/MIN（32COILS/ROW）

POWER: 3.5KW

WEIGHT: 750kg

UP AND DOWN NON-WOVEN: WITHOUT

REFERENCE NUMBER: K-8416

G1 TONELLO 330 "CENTRIFUGING" INDUSTRIAL WASHING MACHINE-USED

G1 TONELLO 330

“CENTRIFUGING” INDUSTRIAL WASHING MACHINE

FRONTAL TYPE

FOR CHEMICAL “STONE WASH”

CAPACITY LIT. 3.300

MOD. TONELLO G1 330

GENERAL DESCRIPTION:

TONELLO G1 IS A MACHINE WITH HIGH-SPEED HYDRO-EXTRACTION (600 R.P.M.) AND IT IS EQUIPPED WITH AUTOMATIC SELF-BALANCING SYSTEM

TONELLO G1 IS SUPPLIED WITH “SETTABLE INVERTER”

ROTATION SPEED FROM 0 TO 55 R.P.M

ALSO SETTING THE CENTRIFUGING SPEED FROM 0 TO 600 R.P.M.

WITH TIME OF CENTRIFUGE PROGRAMMABLE BY INDUSTRIAL PC

THE ACCESS MAIN DOOR TO THE DRUM IS VERY WIDE, IN ORDER TO EASY GARMENTS LOADING AND UNLOADING OPERATION

OPENING AND CLOSING ARE PNEUMATIC

DOUBLE TILTING SYSTEM FOR GARMENTS LOADING AND UNLOADING

DRIVING SYSTEM IS SITUATED ON THE UPPER PART OF THE MACHINE

WITH PROPER MATERIAL AND MOTORS SUITABLE TO WORK AT LOW AND HIGH R.P.M.

1 TANK FOR THE PREPARATION OF AUXILIARY PRODUCTS WITH CAPACITY OF LITTERS 180 EQUIPPED WITH ELECTRO-PUMP AND PNEUMATIC VALVES FOR THE SENT ONE

THE DRAINAGE IN DRAIN AND AUTOMATIC RINSES N° 2 WATER INLETS COMPLETE WITH PNEUMATIC VALVE- MECHANICAL WATER-COUNTER DIRECT HEATING AND COOLING SYSTEM

AUTOMATION WITH MICROPROCESSOR

TECHNICAL DATA TONELLO G1 330

DRUM DIMESION                           

-DRUM HOLING SHEET                                   mm                        4

THICKNESS         

-DIAMETER                                                   MM                       1900

-DEPTH                                                        MM                       1150

-VOLUME                                                      LT.                       3300

-DOOR DIAMETER                                           MM                       1020

-MAXIMUM LOADING                                        KG.                      120/130

CAPACITY           

BASKET SPIN SPEED                                        RPM                      0-600

DIRECT STEAM CONNECTION                               Ø                        1" 1/4

WATER INLET CONNECTION                                 Ø                        2 x 2

COMPRESSED AIR INLET                                     Ø                        1/4"

CONNECTION   

STEAM IN MAXIMUM PRESSUREBAR                      BAR                       6

WATER IN MAXIMUM PRESSURE                           BAR                       4

COMPRESSED AIR IN MAXIMUM                           BAR                       8

PRESSURE          

POWER INSTALLED                                           KW                        22

3-PHASE VOLTAGE                                           VOLT/HZ                 400/50

PRODUCTS TANK Ø 240 H 400                             LT.                         80

TANK RINSING VALVE                                         Ø                         1/2"

MACHINE SIZE                  

-WIDTH                                                          MM                        2500

-WIDTH WITH ELECTRICAL PANEL                         MM                        2980

-DEPTH                                                           MM                        2710

-HEIGHT                                                          MM                        3000

REFERENCE NUMBER: G-8608

MODEL N-32 COTTON FANCY YARN TWISTER

ITEM:: FANCY YARN TWISTER

MODEL: N-32

BASIC FUNCTION: SPINNING COTTON LOOP YARN, TT YARN, SLUB/KNOP YARN, 2 COLOR CHANGER FANCY YARN

SPECIFICATIONS: (AS PER ONE SET):

CONTROL: TOUCH SCREEN+ PLC

NUMBER OF SPINDLES: 12

RANGE OF COUNT: 1 TO 48Nm

RANGE OF FIBRE LENGTH: 22 TO 64 TO 102mm

RANGE OF DRAFT: APPROXIMATELY 2 TO 50

SPEED OF HOLLOW SPINDLE: 12000RPM

SPEED OF FALSE-TWISTER: 18000RPM

DRAFTING ROLLER: Φ28/28/28mm

FIBRE LENGTH RANGE: 22 TO 42mm

GROOVED DRUM: Φ82 X 105mm

POWER: 2.2KW

VOLTAGE220 AC  50HZ: 220/3 X 380V  AC  50HZ

EXTERNAL DIMENSIONS: 2500mm X 1000mm X 2200mm

REFERENCE NUMBER: K-3894

LABORATORY ROVING FRAME

MACHINE: X-A3 LABORATORY

NAME:ROVING FRAME

MODEL: X-A3

BASIC FUNCTION: TO SPIN THE COTTON INTO THREAD

TECHNIQUE DATA:

CONTROL: TOUCH SCREEN+ PLC

SPINDLE NUMBER: 1

TWISTING DEGREE: ABOUT 50-250 PIECES/METER

DRAFTING RATIO: ABOUT 2-50

FIBER LENGTH: 22mm TO 42mm

OUTPUT: ABOUT 0.25KG TO 1 KG

SPEED OF SPINDLE FLYER: 600 RPM

ROLLER SIZE: Φ28mm/25mm/28mm

CAN SIZE: Φ250mm×550 mm

TOTAL POWER: 700W 

VOLTAGE: 220/3×380V AC 50/60Hz

MACHINE DIMENSIONS: 1000mm×800mm×1600mm

REFERENCE NUMBER: K-3893

LABORATORY DRAWING MACHINE

MACHINE: X-A2 LABORATORY

NAME:DRAWING MACHINE

MODEL: X-A2

BASIC FUNCTION: THREE UPPER AND THREE LOWER DRAFTING/EXTENSION DEVICES, STRAIGHTEN FIBER AND IMPROVE EVENESS

TECHNIQUE DATA:

CONTROL: TOUCH SCREEN+ PLC

FIBER LENGTH: 22mm TO 64mm

OUTPUT: ABOUT 0.25KG TO 1 KG

DRAFTING ROLLER SIZE: Φ35mm

OUTPUT SPEED: ABOUT 12M/MIN

DRAFTING RATIO: ABOUT 2-10

CAN SIZE: Φ250mm×550mm

TOTAL POWER: 950W 

VOLTAGE: 220/3×380V AC 50/60Hz

MACHINE DIMENSIONS: 1200mm×800mm×1200mm

REFERENCE NUMBER: K-3888

LABORATORY DOUBLE TWISTER

MACHINE: X-06 LABORATORY SOWN

NAME:TWISTER

MODEL: X-06

BASIC FUNCTION: IT IS USED FOR TWISTING SINGLE YARNS INTO COMPOUND YARN THROUGH RING SPINDLES

TECHNIQUE DATA:

CONTROL MODE: TOUCH SCREEN+ PLC

SPINDLE NUMBER: 12

TWISTING DEGREE: ABOUT 1200-2000T/m

OUTPUT: ABOUT 0.25KG TO 1 KG

SPEED OF LOOP SPINDLES: 20000RPM

ROLLER SIZE: Φ25mm/25mm/25mm

RING SIZE: Φ38mm TO 45mm

TOTAL POWER: ABOUT 850W  

VOLTAGE: 220V AC  50/60Hz

MACHINE DIMENSIONS: 1600mm×1200mm×1600mm

REFERENCE NUMBER: K-3887

LABORATORY CARDING MACHINE (NEW) - FOR NONWOVEN 250mm

MACHINE: 1-T LABORATORY CARDING

NAME:MACHINE FOR NONWOVEN

MODEL: 1 T

BASIC FUNCTION

NOTE: THE MACHINE CAN BE MADE SPECIFIC FOR NONWOVEN WITH WORKERS AND STRIPPERS, TAKE OFF ROLLS AT EXIT

TECHNIQUE DATA:

CONTROL METHOD: TOUCH SCREEN+ PLC

FIBER LENGTH: 22mm TO 42mm

OUTPUT: ABOUT 0.25 TO 1 KG

CYLINDER SIZE: Φ300mm×250mm

CYLINDER SPEED: 1000 RPM

DOFFER SIZE: Φ160mm×250mm

TOTAL POWER: 1200W 

OUTPUT MODE: EXTENDING COTTON WEB

VOLTAGE: 220/3×380V AC 50/60Hz

MACHINE DIMENSIONS: 2100mm×800mm×1300mm