Search results for: '5000-23'

V-1325 FEHRER NEEDLE LOOM MODEL NL21/S, WIDTH 3000mm, YEAR 1986 – 5000 NEEDLES/METER

NEEDLE LOOM
MAKE: FEHRER
MODEL: NL21/S
WIDTH: 3000mm
YEAR: 1986
NEEDLE PATTERN 2 X 5000 PATTERN K1 (300mm FRONT TO BACK)
TOTAL 6 SECTION BOARDS 1000mm WIDE EACH
STROKE 35mm
1800 RPM
OUTLET ROLLER 200mm DIAMETER

QUANTITY: 1

Learn More

TT-3492 TOYOTA T810 AIRJET LOOM, 4 COLORS, WORKING WIDTH 2300mm, YEAR 2020, DOBBY MODEL: TOYOTA MAKER: T 810 YEAR: 2020 QUANTITY: 24 SETS Learn More

TT-3433 TSUDAKOMA ZAX-E AIRJET LOOM, WORKING WIDTH 2300mm, YEAR 2003, 2 COLORS, CAM TSUDAKOMA ZAX-E AIRJET LOOM MODEL: ZAX-E BRAND: TSUDAKOMA YEAR 2003 QUANTITY: 30 SETS Learn More

REFERENCE NUMBER: M-4252 (1010125PA9RC) K VAMATEX P1001ES YEAR 1997-1998 WIDTH 2300mm DOBBY -8 COLORS VAMATEX P1001ES WIDTH 2300mm DOBBY FIMTEXTILE RD840 YEAR 1997-1998 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-2367 FOAM CRANES FOAM CRANE - 30 METERS MODEL: HSJJ-30 QUANTITY: 1 FOAM CRANE - 50 METERS MODEL: HSJJ-50 QUANTITY: 1 QUANTITY AVAILABLE: 2 Learn More

TT-7680 SIEMENS SST 400 CONDENSING STEAM TURBINE, YEAR 2011, 50/60Hz, 30 MW SIEMENS SST 400 YEAR 2011 TYPE: SST 400 CONDENSING STEAM TURBINE WITH FOUR BLEEDS AND ONE EXTRACTION TURBOSE OUTPUT: (AT GENERATOR TERMINALS) NORMAL 30 MW MAXIMAL 31.88 MW MINIMAL 4.5 MW QUANTITY: 4 Learn More

TT-7214 HDB WOOLLEN CARDING AND SPINNING FOR CARPET YARN PRODUCTION, 3000mm, YEAR 2005 ITEM 001 1. HDB 3000mm GALAXY WOOLLEN CARD YEAR 2005 2. 160 GOOD ENDS 3. BALE FEED, HOPPER WITH SERVOLAP, BREAST & SINGLE-PART SCRIBBLER, PERALTA, 2-PART CARDER, 4-HEIGHT TRIPLE RUB TAPE CONDENSER WITH 160 GOOD ENDS ITEM 002 1. HDB WOOLLEN SPINNING FRAMES YEAR 2002 160 SPINDLES EACH 2. 600mm TUBE 140mm RING, 180mm PITCH Learn More

TT-6361 SIEMENS SGT 400 POWER PLANT – NEW, 12.9 MW, YEAR 2017, 50Hz 1. BRAND: SIEMENS TURBINES 2. MODEL: SIEMENS SGT400 3. CONDITION: NEW 4. YEAR: 2017 Learn More

TT-2390 LEE C. MOORE RIG 8 NATIONAL 1320 UE, CAPACITY 500,000 LBS. AND 800,000 LBS, 60 Hz, YEAR 2007 TO 2015 AUXILIARY EQUIPMENT: A) (16) 8” SLICK DRILL COLLARS B) (32) 6-1/2” O.D. X 2-13/16” I.D SLICK DRILL COLLARS C) 550 JOINTS 5” 19.50#, S-135 DRILL PIPE WITH HARD BAND AND TK LINED D) COMPRESSOR HOUSE WITH GRASSHOPPER E) MUD HOUSE F) TOOL HOUSE G) CHANGE HOUSE H) PARTS HOUSE I) (2) JUNK BOXES J) (1) SUB BOX K) (2) INGERSOLL-RAND MODEL K6U AIR HOISTS L) INTER-AMERICAN MODEL SURVEYOR WITH 15,000’ WIRE LINE M) KELLY: 5-1/4” HEX X 42’L N) KELLY DRIVE BUSHING O) KELLY SPINNER P) UPPER KELLY VALVE Q) LOWER KELLY VALVE, 5,000 PSI R) NATIONAL MODEL D DEAD LINE ANCHOR S) MARTIN DECKER, TYPE E, 900,000 LB. CAPACITY T) OPI PIPE SPINNER U) STEEL FRAMED RIG MATS V) WIRE SUITCASES W) TOOL PUSHER QUARTERS X) 12 PERSON CREW QUARTER Learn More

TT-5551 CATERPILLAR MODEL XQ2000 SETS, YEAR 2000 TO 2004, 50/60 Hz CATERPILLAR MODEL XQ2000 SETS YEAR MODELS 2000 TO 2004 5000 HOURS OPERATION SINCE NEW TO REBUILT ENGINES WITH 3K-TO-5K HOURS USED CATERPILLAR FEATURES EMISSIONS EPA AND CARB EMISSIONS CERTIFIED FOR NON-ROAD MOBILE APPLICATIONS. CATERPILLAR DIESEL GENERATOR SETS FACTORY DESIGNED, CERTIFIED PROTOTYPE TESTED WITH TORSIONAL ANALYSIS. PRODUCTION TESTED AND DELIVERED TO YOU IN A PACKAGE THAT IS READY TO BE CONNECTED TO YOUR FUEL AND POWER LINES. ELECTRIC POWER DESIGN PRO COMPUTER SIZING AVAILABLE. SUPPORTED 100% BY YOUR CATERPILLAR DEALER WITH WARRANTY ON PARTS AND LABOR. EXTENDED WARRANTY AVAILABLE IN SOME AREAS. THE GENERATOR SET WAS DESIGNED AND MANUFACTURED IN AN ISO 9001 COMPLIANT FACILITY. GENERATOR SET AND COMPONENTS MEET OR EXCEED THE FOLLOWING SPECIFICATIONS: AS1359, AS2789, ABGSM TM3, BS4999, DIN6271, DIN6280, EGSA101P, JEM1359, IEC 34/1, ISO3046/1, ISO8528, NEMA MG1-22. Learn More