Search results for: 'delivery'

TT-5031 WORSTED SPINNING AND RE-COMBING INSTALLATION FOR FINE COUNT OF WOOL, YEAR 1983 TO 2006 WORSTED SPINNING AND RE-COMBING INSTALLATION FOR FINE COUNT OF WOOL COMPACT SYSTEM FROM NM.1/40 UP TO NM.1/80 PRODUCTION CAPACITY 3,500 KG PER 24 HOURS Learn More

TT-3702 WORSTED SPINNING PLANT OF 4992 SPINDLES, YEAR 1987 TO 2022 WORKING CONDITION CONTAINER: 26/30 (DEPENDING FROM ACCESSORIES) Learn More

REFERENCE NUMBER: M-3504 (880EASDHH7) K WORSTED SPINNING PLANT - 1 x COGNETEX GILL MODEL SCE.11.VA, BOBBINS/CANS FEEDING, ELECTRONIC AUTOLEVELLER, DELIVERY 1 SLIVER IN 1 CAN DIA. 700 x 1000 mm. - 1 X COGNETEX MODEL SC.400 PREPARATION LINE, YEAR 1993, COMPOSED BY: - 1ST GILL MODEL SCE.11.VA, CANS FEEDING, ELECTRONIC AUTOLEVELLER, DELIVERY 1 SLIVER IN 1 CAN DIA. 1000 x 1200 mm. - 2ND GILL MODEL SC.22.V, CANS FEEDING, DELIVERY 2 SLIVERS IN 1 CAN DIA. 1000 x 1200 mm. - 3RD GILL MODEL SC.24.V, CANS FEEDING, DELIVERY 4 SLIVERS IN 2 CANS DIA. 1000 x 1200 mm - 1 x SANT'ANDREA VERTICAL FINISHER MODEL RF2B, YEAR 1993, 24 HEADS, TUBES OF 300 mm. - 1 x COGNETEX FRAMES MODEL FTC8L, YEAR 1992, 736 SPINDLES, RING DIA. 55 mm., PK.1601, INVERTER, MANUAL DOFFING, MAGITEX BLOWER - 2 x COGNETEX FRAMES MODEL FTC8L, YEAR 1992, 736 SPINDLES EACH, RING DIA. 55 mm., PK.1601, INVERTER, AUTODOFFING, MAGITEX BLOWER - 3 x ZINSER FRAMES MODEL 319SL, YEAR 1/1983 + 1/1986 + 1/1988, 812 SPINDLES EACH, RING DIA. 54 mm., PK.1601, INVERTER, AUTODOFFING, MAGITESX BLOWER sold - 2 x ZINSER FRAMES MODEL 319SL, YEAR 1/1983 + 1/1986, 736 SPINDLES EACH, RING DIA. 54 mm., PK.1601, AUTODOFFING, MAGITEX BLOWER sold - 1 x ZINSER FRAME MODEL 421E, YEAR 1992, 736 SPINDLES, RING DIA. 54 mm., PK.1601, AUTODOFFING, MAGITEX BLOWER - 2 x SAVIO WINDERS MODEL ESPERO.E, YEAR 1996, 36 HEADS EACH, AUTOLOADING, AUTODOFFING, NO WAXERS, MESDAN SPLICERS, LOEPFE MODEL TK.740 CLEARERS, DELIVERY 6”, MAGITEX BLOWER - 3 x SAVIO WINDERS MODEL ESPERO.E, YEAR 1999, 48 HEADS EACH, AUTOLOADING, AUTODOFFING, NO WAXERS,MESDAN SPLICERS, LOEPFE MODEL TK.840 CLEARERS, DELIVERY 6”, MAGITEX BLOWER - 1 x RITE DOUBLING MACHINE MODEL ARD/L, YEAR 2000, 40 POSITIONS, SINGLE SIDE, AUTODOFFING, COUPLING TILL TO 6 ENDS, EXTERNAL CREEL, ELECTRONIC STOP MOTION, DELIVERY 8”, ELECTROJET BLOWER - 3 x VOLKMAN SAURER 2X1 TWISTERS MODEL VTS.07, YEAR 2000, 144 POSITIONS EACH, INVERTER, VULCOJET PNEUMATIC THREADING, FEEDING 8”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 4 x VOLKMANN 2X1 TWISTERS MODEL VTS.07, YEAR 1/1987 + 1/1988 + 2/1992, 144 POSITIONS EACH, VULCOJET PNEUMATIC THREADING, FEEDING 2X6”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 1 x VOLKMANN 2X1 TWISTER MODEL VTS.07, YEAR 1992, 160 POSITIONS, VULCOJET PNEUMATIC THREADING, FEEDING 2X6”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 1 x VOLKMANN 2X1 TWISTER MODEL VTS.07, YEAR 1993, 168 POSITIONS, VULCOJET PNEUMATIC THREADING, FEEDING 2X6”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 1 x MOTOCONO HIGH BULKING MACHINES MODEL HBI, YEAR 2000, 32 HEADS, FEEDING 6”, BULKING BY INDIVIDUAL END, ELECTROJET BLOWER, LINKED WITH MOTOCONO WINDER MODEL LDA, YEAR 2000 - 1 x MOTOCONO HIGH BULKING MACHINES MODEL HBI, YEAR 2000, 32 HEADS, FEEDING 6”, BULKING BY INDIVIDUAL END, ELECTROJET BLOWER, LINKED WITH MOTOCONO WINDER MODEL L/CF, YEAR 2004 - 1 x MOTOCONO HIGH BULKING MACHINES MODEL HBI, YEAR 2004, 32 HEADS, FEEDING 6”, BULKING BY INDIVIDUAL END, ELECTROJET BLOWER, LINKED WITH MOTOCONO WINDER MODEL LDA, YEAR 2003 - 2 x ATLAS COPCO AIR COMPRESSOR MODEL GA.37, YEAR 1/1996 + 1/2001, 7,5 HP (FOR WORKING WITH WINDERS) ALL THE PLANT IS RUNNING 380V – 50 HZ, TRIPHASE ALL ACCESSORIES AS TUBES, CANS, CONES ARE INCLUDED QUANTITY AVAILABLE: 1 Learn More

TT-4024 WORSTED SPINNING PLANT WITH 9,650 SPINDLES, SUITABLE FOR COMPACT YARN NM 15-80, YEAR 1983 TO 2006 (10,000 SPINDLES) BLENDING COMBING LINE PREPARATION FINISHER WINDING LINE Learn More

TT-2617 COMPLETE WORSTED SPINNING LINE WITH 9650 SPINDLES, YEAR 1983 TO 2006 THE MACHINES ARE STILL IN PRODUCTION IN VERY GOOD CONDITION. WORSTED SPINNING PLANT WITH 9650 SPINDLES, SUITABLE FOR COMPACT YARN NM 15-80 Learn More

REFERENCE NUMBER: YY-1365 CONTINUOUS PRODUCTION LINE FOR IMPREGNATION, DRYING, ABRASIVE SPRAY, HEAT-SETTING OF SYNTHETIC FIBERS FOR ABRASIVE WADDINGS, WITH AIRLAY CARDING MACHINE AND FIBER PREPARATION DETAILS: MAIN FEATURES: - THREE LAYERS OVEN: TWO UPPER DRYING LAYERS WITH LENGTH OF 6+ 6 METERS; ONE LOWER CURING LAYER WITH A LENGTH OF 6 METERS; - HEATING: BY DIRECT HEATING WITH AUTOMATIC BURNERS; - CONVEYOR WIDTH: 2200mm; - WORKING WIDTH: 2000mm; - MAX DRYING AND POLYMERISATION TEMPERATURE: 230°C; - HEATING POWER: 4 BURNERS 350 KW EACH ONE, ABOUT TOTAL 1.400 KW; - VENTILATION: SEMI-CLOSED SYSTEM WITH 4 CENTRIFUGAL VENTILATORS; - ADJUSTABLE CONVEYOR SPEED BY A.C. MOTORS; - INSTALLED ELECTRIC POWER: 200 KW. APPROX.; - MECHANICAL SPEED: 2÷15 METERS PER MINUTE; - CONVEYOR DRIVING: BY A.C. MOTORS; - MANUFACTURED ARTICLE: SYNTHETIC FIBERS ABRASIVE WADDING. Learn More

TT-8626 HDB DOUBLE DOFFER NONWOVEN CARD, 2500mm 1. HDB DOUBLE DOFFER NONWOVEN CARD 2. 2500mm 3. RE-CONDITIONED 4. NEW TOWER FEED QUANTITY: 1 Learn More

TT-3206 COGNETEX INTERSECTING DRAWING FRAME COMPLETE SET, YEAR 1986 ITEM 001 REBREAKER BLENDER DRAWING FRAME COGNETEX MODEL SMC 400, 11V YEAR 1986 QUANTITY: 4 ITEM 002 1ST PASSAGE: GILL BOX COGNETEX, MODEL SC 400 11 VA, YEAR 1986 WITH AUTOLEVELLER QUANTITY: 1 ITEM 003 2ND PASSAGE: GILL BOX COGNETEX, MODEL SC 400 22 V, YEAR 1986 QUANTITY: 1 ITEM 004 2ND PASSAGE: GILL BOX COGNETEX, MODEL SC 400 22 V, YEAR 1986 QUANTITY: 1 ITEM 005 3RD PASSAGE: GILL BOX COGNETEX, MODEL SC 400 22 V, YEAR 1986 QUANTITY: 1 ITEM 006 3RD PASSAGE: GILL BOX COGNETEX, MODEL SC 400 22 V, YEAR 1986 QUANTITY: 1 Learn More

REFERENCE NUMBER: M-4747 (1111NBRTHH10) L INDUSTRIAL BREWERY WITH BREWHOUSE 20 HL INDUSTRIAL BREWERY WITH CAPACITY OF 20 HL PER BREW YEAR PRODUCTIVITY OF 6,000 TO 7,000 HL, 3 SORTS OF BEER BREWERY IS NOT LOCATED AT A SEISMIC AREA EQUIPMENT DESIGNED ACCORDING TO EUROPEAN STANDARD STEAM HEATED 2-VESSEL BREW HOUSE OF 20 HECTOLITRES IN STAINLESS STEEL SCOPE OF SUPPLY: MALT MILL 1 X 2-ROLL MILL WITH CAPACITY OF 400 TO 800 KG/H WITH INLET FROM THE TOP FOR MALT SACKS BREW HOUSE 20HL STEAM HEATED STAINLESS STEEL 1.1 MASH/WORTH – KETTLE DOUBLE WALLED INNER SHELL OF STAINLESS STEEL, MATERIAL 1.4301 LLC, WELDS GROUND WITH GRAIN SIZE 220 OUTER SHEATH MADE OF STAINLESS STEEL 2 STEAM HEATING ZONES (BOTTOM AND CYLINDRICAL PART) AGITATOR AND SHAFT IN STAINLESS STEEL, MATERIAL 1.4301. INSTALLATION OF BOTTOM CENTER. DRIVE VIA GEAR MOTOR, SPEED CONTROLLABLE BY FREQUENCY CONVERTER 1 SPRAY BALL 1 MAN HOLE WITH GLASS 1 PRESSURE RELIEF VALVE – SAFETY VALVE 1 LEVELMEASUREMENT DESIGNED FOR NON PRESSURE OPERATION 1.2 LAUTER TUN DOUBLE WALLED INNER SHELL OF STAINLESS STEEL, MATERIAL 1.4301 IIIC, WELDS GROUND WITH GRAIN SIZE 220 OUTER SHEATH MADE OF STAINLESS STEEL ISOLATION OF THE CYLINDRICAL PART AND THE BOTTOM - 100 MM HALOGEN-FREE MINERAL WOOL. BOTTOM OF THE LAUTER TUN WITH OUTLET VALVES, BACK WASH VALVES AND A DRAIN VALVE MULTIPART SIEVE PLATE 1.4301 REMOVABLE THROUGH MANHOLE. HOEING 1.4301 TWO-ARMED WITH KNIVES AND TREBERN SWORD. INSTALLATION OF BOTTOM CENTER. 1 LAUTER STATION WITH CIP SPRAY BALL 1 MANHOLE WITH GLASS 1 SPRAY BALL 1 TREBERN FLAP AT THE CYLINDRICAL PART DESIGNED FOR NON PRESSURE OPERATION THE PACKAGE INCLUDES ALL VALVES, CHECK VALVES, BUTTERFLY VALVES, 2 PUMPS AND TEMPERATURE PROBES LANDING AND STAIRS MADE OF STAINLESS STEEL SQUARE ROOF BARS, COVERED WITH CORRUGATED SHEET METAL, HEIGHT ADJUSTABLE FEET WITH DOMES. THE PAN DUST WILL BE COLD DOWN WITH COLD WATER AND THE CONDENSATE WILL BE TRANSFERRED TO THE DRAIN WHIRLPOOL 20HL VESSEL MADE OF STAINLESS STEEL, MATERIAL 1.4301 IIIC, WELDS GROUND WITH GRAIN SIZE 220. NON INSULATED. 1 WHIRLPOOL PUMP 2 LATERAL OUTLETS WITH HAND VALVES 1 FLOOR DRAIN WITH HAND VALVE 1 TANGENTIAL INLET PORT WITH THREADED CONNECTOR 1 SAFETY VALVE 1 MANHOLE 1 SPRAY BALL DESIGNED FOR NON PRESSURE OPERATION WORTHCOOLING + WORTH AERATION VESSEL MADE OF STAINLESS STEEL, MATERIAL 1.4301 IIIC, WELDS GROUND WITH GRAIN SIZE 220. NON INSULATED. 1 WHIRLPOOL PUMP 2 LATERAL OUTLETS WITH HAND VALVES 1 FLOOR DRAIN WITH HAND VALVE 1 TANGENTIAL INLET PORT WITH THREADED CONNECTOR 1 SAFETY VALVE 1 MANHOLE 1 SPRAY BALL DESIGNED FOR NON PRESSURE OPERATION 1. SECTION: 20 HL WORTH IS COOLED WITH COLD WATER FROM 98°C TO 17°C IN 60 MINUTES (COLD WATER FROM CLIENT SIDE MUST BE MAX. 15°C OR LOWER) 2. SECTION: WITH ICE WATER OR GLYCOL THE WORTH IS COOLED TO 5°C CONTROL SYSTEM EACH PNEUMATIC CONTROLLED VALVE WILL HAVE A SWITCH BUTTON ON A CONTROL PANEL IN THE MIDDLE OF THE BREW HOUSE. ALSO THE TEMPERATURE CONTROL OF THE MASH KEETEL AND WORTH KETTLE WILL BE IMPLEMENTED AT THE CONTROL PANEL WITH A HARD WARE CONTROLLER. HOT WATER TANK 30 HL VERTICAL DESIGN, MATERIAL 1.4301 DOUBLE WALLED INNER SHELL OF STAINLESS STEEL, MATERIAL 1.4301 IIIC, WELDS GROUND WITH GRAIN SIZE 220 OUTER SHEATH MADE OF MATERIAL 1.4301 WITH GRAIN 220 1 HOT WATER PUMP 1 CIRCULATION PUMP 1 PT 100 AN CONTROLLER 1 STEAM VALVE AND CONDENSATE VALVE 1 LEVEL INDICATION 10 X CYLINDER CONICAL TANKS 40/48 HL VERTICAL DESIGN WITH DISHED BOTTOM AND 60° CONE. CONE AND CYLINDRICAL PART IS INSULTED AND THE FULL TANK IS EQUIPPED WITH WELDED STAINLESS STEEL EXTERIOR FINISH. TANK HEIGHT APPROX.: 4.050MM TANK EQUIPPED WITH COOLING JACKET (1 ZONE) AND CONE COOLING (2 ZONE), BY TEMP- PLATE, SUITABLE FOR ICE WATER / GLYCOL. SEPARATE CONNECTIONS FOR COOLING FOR CASING AND CONE : NIPPLE ¾ " EXTERNAL THREAD TANK WITH MANHOLE 500 X 400 MM, WITH MANHOLE COVER AND DUAL HINGE. 2 OUTLET DN 32 INSTALLED IN A DN 125 - THREAD , PULLED FORWARD AND ENDED BUTTERFLY VALVE DN 32 G / S , WITH BLANKING CAP. UPPER FLOOR PROVIDED WITH 2 THREADED CONNECTION DN 32 FOR CONNECTION OF AN RLV - FITTING. ONE OF THE TERMINALS INSTALLED IN A FITTING DN 100 AND DN 25 PROVIDED WITH REMOVABLE SPRAY BALL CLEANING PIPE DN25, TOP PROVIDED WITH CONNECTION CONE / NUT DN 32FOR CONNECTION TO THE RLV COMBINATION, PULLED DOWN AND ENDING ON OPERATING HEIGHT IN THREADED CONNECTION DN 50, INCLUDING BLANKING CAP. IN THE CLEANING DUCT 2 CONNECTOR WITH THREADED CONNECTION DN 20 FOR SPUND APPARATUS AND WITH BALL VALVE FOR THE GAS SUPPORT 1 CONNECTOR FOR SAMPLE VALVE: THREADED CONNECTION DN 20 2 CONNECTION FOR PT -100: IMMERSION SLEEVE 260 MM LONG, WITH SLEEVE ½ " . 2 SOLENOID VALVE FOR THE COOLING DUCT 4 MANUAL VALVES IN THE COOLANT INLET AND COOLANT OUTLET LINE 4 THE HEIGHT ADJUSTABLE TUBE FEET , INCLUDING FOOTPLATE. MATERIAL: 1.4301. FINISH: - INSIDE: - 2B (IIIC-SHEET), DISHED BOTTOM GROUND. - WELDS - ROUND & LONG SEAMS SANDED. - REST STAINED / BRUSHED. - OUTSIDE: - 2B (IIIC-SHEET). - WELDS - ROUND & LONGITUDINAL SEAMS SANDED. - REST STAINED / BRUSHED TANK SUITABLE FOR 3 BAR G. (20 ° C), DECREASE ACCORDING TO PED 97/23/EC. FILTRATION 20 HL/H KISELGUR- FILTER WITH HORIZONTAL SLICES AND CAPACITY OF 20HL / HOUR 3 X PRESSURE DISPENDING TANKS 40/46 HL VERTICAL DESIGN WITH DISHED BOTTOM LOWER + UPPER BOTTOM AND CYLINDRICAL PART IS INSULTED AND THE FULL TANK IS EQUIPPED WITH WELDED STAINLESS STEEL EXTERIOR FINISH. TANK HEIGHT APPROX.: 3.350MM TANK EQUIPPED WITH COOLING JACKET (1 ZONE) BY TEMP- PLATE, SUITABLE FOR ICE WATER / GLYCOL. CONNECTION FOR COOLING: NIPPLE ¾ " EXTERNAL THREAD TANK WITH MANHOLE 500 X 400 MM, WITH MANHOLE COVER AND DUAL HINGE. 1OUTLET DN 32 PULLED FORWARD AND ENDED BUTTERFLY VALVE DN 32 G / S , WITH BLANKING CAP. UPPER FLOOR PROVIDED WITH 2 THREADED CONNECTION DN 32 FOR CONNECTION OF AN RLV - FITTING. ONE OF THE TERMINALS INSTALLED IN A FITTING DN 100 AND DN 25 PROVIDED WITH REMOVABLE SPRAY BALL CLEANING PIPE DN 25, TOP PROVIDED WITH CONNECTION CONE / NUT DN 32 FOR CONNECTION TO THE RLV COMBINATION, PULLED DOWN AND ENDING ON OPERATING HEIGHT IN THREADED CONNECTION DN 32, INCLUDING BLANKING CAP. IN THE CLEANING DUCT 2 CONNECTOR WITH THREADED CONNECTION DN 20 FOR SPUND APPARATUS AND WITH BALL VALVE FOR THE GAS SUPPORT 1 CONNECTOR FOR SAMPLE VALVE: THREADED CONNECTION DN 20 1 CONNECTION FOR PT -100: IMMERSION SLEEVE 260 MM LONG, WITH SLEEVE ½ " . 1 SOLENOID VALVE FOR THE COOLING DUCT 2 MANUAL VALVES IN THE COOLANT INLET AND COOLANT OUTLET LINE 4 THE HEIGHT ADJUSTABLE TUBE FEET , INCLUDING FOOTPLATE. MATERIAL: 1.4301. FINISH: - INSIDE: - 2B (IIIC-SHEET), DISHED BOTTOM GROUND. - WELDS - ROUND & LONG SEAMS SANDED. - REST STAINED / BRUSHED. - OUTSIDE: - 2B (IIIC-SHEET). - WELDS - ROUND & LONGITUDINAL SEAMS SANDED. - REST STAINED / BRUSHED TANK SUITABLE FOR 3 BAR G. (20 ° C), DECREASE ACCORDING TO PED 97/23/EC. COOLING UNIT COOLING UNIT FOR THE OFFERT TANKS AND FOR THE WORTH COOLING. DESIGNED FOR OPERATION WITH GLYCOL COMPRESSOR OIL FREE FULLY AUTOMATIC, OIL-FREE AIR COMPRESSOR STATION WITH STAGE, MOUNTED ON A PRESSURE VESSEL, EQUIPPED WITH PRESSURE SWITCH, OUTLET VALVE, SAFETY VALVE, PRESSURE GAUGE AND MICRO FILTER. STEAM GENERATOR OIL OPERATED OIL OPERATED STEAM GENERATOR WITH A CAPACITY OF 200 KG/H INCLUDING FEED WATER TREATMENT AND FEED WATER CONTROL MOBILE BEER PUMP BEER PUMP WITH FREQUENCY CONVERTER, SINGLE MECHANICAL SEAL, ON STAINLESS STEEL FRAME (WITH CEE PLUG, MOTOR PROTECTION AND 10 M CABLE) FOR PUMPING FROM THE FERMENTATION TANKS TO THE PRESSURIZED TANK 4 PCS. BEER HOSES SET KEG-CLEANER WITH KEG-HANDFILLER CLEANER: CAPACITY: 10 – 15 KEGS / HOUR SEMI AUTOMATICALLY CLEANING PROCESS FOR ALL STANDARD KEGS KEG-HAND FILLER: COMPLETE MADE OF STAINLESS STEEL TUBES 2M LONG FOR ALL STANDARD KEGS PACKAGING WOODEN BOX AND FOILING FOR TRANSPORT IN A CONTAINER (SEA WAY), THE WOODEN BOX ALONE IS NOT ENOUGH FOR THE SEA WAY DOCUMENTATION IN ENGLISH (DEVICE DOCUMENTATION) IN ELECTRONIC FORM MOUNTING MATERIAL FOR MECHANICAL AND ELECTRICAL WORK UPON RECEIPT OF THE LAYOUT DRAWING, SPECIFICATIONS OR INTERFACES AND CLARIFYING THE SCOPE OF DELIVERY WE CAN MAKE A DETAILED QUOTE FOR DELIVERY, INSTALLATION, AND COMMISSIONING MOUNTING AND COMMISSIONING FOR MECHANIC WORK AND ELECTRIC WORK (LIFTING DEVICES- CRANE, ENERGY, RAW MATERIAL, CLEANING SOLUTION, HOTEL, FLIGHT TICKET, LABOURER FOR MOUNTING SUPPORT) UPON RECEIPT OF THE LAYOUT DRAWING, SPECIFICATIONS OR INTERFACES AND CLARIFYING THE SCOPE OF DELIVERY WE CAN MAKE A DETAILED QUOTE FOR DELIVERY, INSTALLATION, AND COMMISSIONING 4 TEST BREWS (ENERGY, RAW MATERIAL, CLEANING SOLUTION, HOTEL, FLIGHT TICKET) AND TRAINING OF THE OPERATOR STAFF UPON RECEIPT OF THE LAYOUT DRAWING, SPECIFICATIONS OR INTERFACES AND CLARIFYING THE SCOPE OF DELIVERY WE CAN MAKE A DETAILED QUOTE FOR DELIVERY, INSTALLATION, AND COMMISSIONING LABORATORY CIVIL WORK CO2 – SUPPLY PERMITS AND LICENSES FROM LOCAL AUTHORITIES TRANSPORT WATER TREATMENT AND COLD WATER TANK (IF REQUIRED) YEAST MANIPULATION (IF REQUIRED) Attached 3 photos from similar equipment. F1: brewhouse F2: CCT (cylindroconicalk tanks) and BBT (bright beer tanks = dispensing tanks) F3: PHE(plate heat exchanger = wort cooling, whirlpool, hot water tank) QUANTITY AVAILABLE: 1 Learn More

TT-6643 KUSTERS OPEN WIDTH BLEACHING LINE, WORKING WIDTH 3800mm, YEAR 1991 1. FOR THE TREATMENT OF FLAT FABRIC AND COTTON/COTTON BLEND TERRY FABRIC. 2. 9 WASHING VATS. 3. ROLLER WIDTH: ENTRY 4000mm, DELIVERY 3800mm 4. USEFUL WORKING WIDTH: ENTRY 3800mm, DELIVERY 3600mm 5. PRODUCTION SPEED: UP TO 120 M/MIN. 6. ENTRY FABRIC TYPE 288.09 FROM BIG BATCH WORKING WIDTH 3800mm, WITH E+L SELVEDGE WIDENER MODEL KF 2020 L 7. 1 WASHING TANK MODEL COMPACTA-D MODEL 236.38, WITH FABRIC CONTENT 30 MT., USEFUL WORKING WIDTH 3800mm 8. 1 SQUEEZER MANGLE WITH TWO CYLINDERS, TYPE 225.23, USEFUL WORKING WIDTH 3800mm QUANTITY: 1 Learn More