Search results for: '1"'`--"(,.(',()('[0]'

TT-1634 LOADCRAFT HRI 1000-E DRILLING RIG, YEAR 2011 LOADCRAFT HRI 1000-E DRILLING RIG TYPE: STANDARD BRAND: LOADCRAFT CATEGORY: RIGS SUBCATEGORY: ONSHORE RIGS TYPE: USED CONDITION: EXCELLENT YEAR 2011 1000HP SCR 4-AXLE TRAILER-MTD RIG HRI 1000-E S/D DRAWWORKS WITH WICHITA 3-25KKB DISK BRAKE P/B (2) GE 761 TRACTION MOTORS RATED DEPTH IS 13,000FT DERRICK DSI 118 INCHES HEIGHT 425,000# SHL MAST W/ 1-1/8 INCHES DRILL LINE RACKING BOARDS 3-1/2 INCHES ID ROTARY HOSE STAIRS SAFETY RAILS (6) HYDRAULIC LEVELING JACKS RIG LIGHTS QUANTITY: 1 Learn More

SULZER PS 360 PROJECTILE LOOMS YEAR: 1984 WIDTH: 3600mm MAKE: SULZER MODEL: PS 360 PROJECTILE MACHINES TYPE: E6 MACHINES TYPE: E12 CAM MOTION HEALD FRAMES: 6 LEVERS: 6 SHAFTS: 6 WEFT-FEEDER: 1 WARP BEAM: 1.5 CLOTH ROLLERS: 1.5 HEDDLES: 7,000 DROPPERS: 7,000 SINGLE BEAM 12 LOOMS HAVE TUCKING MOTION ALL ACCESSORIES ARE COMPLETE TOTAL QUANTITY: 17 Learn More

TT-1910 1000HP DRILLMEC RIG, YEAR 2011 RIG TYPE: 1000 HP, SEMITRAILER MOUNTED MECHANICAL DRIVEN FAST MOVING DRILLING RIG. BRAND DRILLMEC, MODEL MR-8000 YEAR 2011 MAST: DRILLMEC, STATIC HOOK LOAD CAP. = 440,000 LB WITH 10 LINES, CLEAR HEIGHT = 104 FT. DRAWWORKS: DRILLMEC, 1000 HP, 1-1/8”. TOP DRIVE: N/A, KELLY ROTARY SYSTEM QUANTITY: 1 Learn More

REFERENCE NUMBER: M-0902 LONATI MONO CYLINDER HOISERY MACHINES LONATI MONO CYLINDER DIAM. NEEDLES YEAR N. 30 L 454 J EURO 3.000 EACH 4” 108 1992/1993 N. 20 L 454 JR EURO 5.500 EACH 4” 120 1997 N. 10 L 454 P EURO 5.000 EACH 4” 108 1999 N. 5 L 454 J EURO 6.000 EACH 4” 108 1999 /2000 N. 8 L 454 J EURO 6.500 EACH 4” 168 / 216 2000/ 2001 N. 10 L 454 P EURO 5.000 EACH 4” 200 / 240 2000/ 2001 QUANTITY AVAILABLE: 6 Learn More

TT-7167 PICANOL LOOMS GAMMAX-8-J-3400, WORKING WIDTH 3400mm, YEAR 2005, JACQUARD 1. PICANOL LOOMS GAMMAX-8-J-3400 2. YEAR 2005 3. WORKING WIDTH 3400mm 4. STAUBLI JACQUARD LX 1600B 5. 2688 HOOKS 6. FREE FLIGHT QUANTITY: 22 Learn More

TT-4131 NEEDLING LINE, WORKING WIDTH 3000mm, YEAR 1986 CONDITION: USED YEAR: 1986 CATEGORY: NON WOVEN SUBCATEGORY: COMPLETE LINES SUBCATEGORY 2: NEEDLING LINES SUBCATEGORY 3: NONWOVEN MACHINERY QUANTITY: 1 Learn More

LIST NUMBER: M-7103
DILO NEEDLE LOOMS 
REFERENCE NUMBER: P-4923
TYPE: DV25
YEAR: 1979
QUANTITY: 1

REFERENCE NUMBER: P-4924
TYPE: NL32968
YEAR: 1979
QUANTITY: 1

REFERENCE NUMBER: P-4925
TYPE: OD II/25
YEAR: 1982
QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5358 (220HRKWXX1) L DEUTZ GAS ENGINES 2MW Learn More

BRUCKNER BOPP EXTRUSION LINE, WIDTH 8200mm, THREE LAYERS, BUILT 1992, COMPLETED WITH AN ATLAS SLITTER/REWINDER, MODEL CW, WIDTH 8200mm. AND FURTHER AUXILIARIES, INCLUDING SPARE PARTS. NAMEPLATE CAPACITY 20,000 T/Y. RAW MATERIALS SECTION - 4 SILOS 250 M3 ALUMINIUM - 2 SILOS 100 M3 ALUMINIUM - 2 SILOS 50 M3 ALUMINIUM - PNEUMATIC TRANSPORT SYSTEM; COMPUTERIZED DOSING SYSTEM, HOPPERS AND SCALES FOR THE THREE EXTRUDERS EXTRUSION SECTION - MAIN EXTRUDERS: 2 MITSUBISHI CASCADE EXTRUDERS Ø 300 mm AND 250 mm - CO-EXTRUDERS: 2 BANDERA EXTRUDERS Ø 100 mm, EQUIPPED WITH MELT PIPES - DIE: SIMPLAST, WIDTH 1,140 mm, GAP 2 - 3.75 mm, 40 PUSH/PULL BOLTS - CHILL ROLL: Ø 3 M, 1,900,000 KJ/H COOLING CAPACITY - WATER BATH: 1.500.000 KJ/H CAPACITY MDO (MACHINE DIRECTION ORIENTATION) SECTION - PREHEATING INFRARED 130 KW - PREHEATING: 16 CHROMIUM PLATED ROLLS Ø 614 mm - STRETCHING: 6 CHROMIUM PLATED ROLLS Ø 180 mm, EQUIPPED WITH RUBBER NIP ROLLS Ø 150 mm - ANNEALING: 2 CHROMIUM PLATED ROLLS Ø 614 mm TDO (TRANSVERSE DIRECTION ORIENTATION) SECTION - TOTAL LENGTH: 66 METER - PREHEATING: 5 SECTIONS - STRETCHING : 5 SECTIONS - ANNEALING : 5 SECTIONS - NEUTRAL : 1 SECTION - COOLING : 2 SECTIONS - INLET 850 – 1,050 mm WIDTH - OUTLET 7,600 – 8,600 mm WIDTH PRS (PULL ROLL STAND) SECTION - EDGE TRIM CUTTERS - ESSECI FLAME TREATER, BURNER, CHROMIUM PLATE ROLL, RUBBER NIP ROLL - CORONA TREATER 1: 3 DISCHARGE BARS, SILICON ROLL, RUBBER NIP ROLL - CORONA TREATER 2: 2 DISCHARGE BARS, EDGE BAR, SILICON ROLL, RUNNER NIP ROLL MEASUREX/HONEYWELL GAUGE CONTROL SYSTEMS - 8.5 M SCANNER FOR FILM - 1.2 M SCANNER FOR CAST SHEET - MAIN THICKNESS CONTROL UNIT CONNECTED TO THE BOLT OF THE EXTRUSION DIE FOR LIP ADJUSTMENT WINDER - 2 TURRETS KAMPF WINDER - AUTOMATIC CUT / TURRET / MILL-ROLL CHANGE - WINDING CORES: 108 STEEL WINDING CORES Ø 500 mm CONTROL UNIT - THE LINE IS EQUIPPED WITH A FULLY INTEGRATED CONTROL SYSTEM SUPPLIED BY BRUCKNER MILL ROLL STAND (SEMI-FINISHED PRODUCTS WAREHOUSE) - 150 TOTAL POSITIONS, OF WHICH 50 IN HEATED CLOSED ROOM - 1 PICK-UP FOR LOADING / UNLOADING WINDER AND SLITTER - 1 MANUAL EMERGENCY PICK-UP FOR LOADING/UNLOADING WI NDER AND SLITTER AND MAINTENANCE - 1 SHUTTLE TO MOVE MILL ROLLS IN AND OUT OF THE WAREHOUSE - 1 MAIN CRANE FOR MOVING MILL ROLLS / EMPTY CORES RECYCLING - HERBOLD GRINDER FOR SCRAP RECOVERY - 4 FLUFF SILOS - 1 EREMA MACHINE FOR REGRANULATION, APPROX. 700 KG/H SLITTER - ATLAS CW MACHINE, BUILT 1992, MAJOR UPGRADE 2010 - INLET MILL-ROLLS MAX Ø 1.2 M, WIDTH 8.2 M - 16 REWINDING STATIONS, WIDTHS FROM 400 mm TO 2450 mm, MAX Ø 1,000 mm - AUTOMATIC KNIVES AND RE-WINDING ARMS POSITIONING PACKING - SEMI-AUTOMATIC BALLOTTI LINE FOR CONDITIONING OF ROLLS AND PALLETS, BUILT 2000 - CONVEYORS - SCALING - STRAPPING - STRETCHING UTILITIES - 3 COMPRESSORS 3 BARS FOR COMPRESSED AIR CIRCUIT FOR RAW MATERIALS HANDLING - 2 COMPRESSORS 6 BARS FOR COMPRESSED AIR - 2 CHILLERS FOR CHILLED WATER PRODUCTION - 2 WATER COOLING TOWERS - 1 BOILER FOR THERMAL OIL PRODUCTION - 3 TRANSFORMERS 15 KV TO 380 V ADDITIONAL EQUIPMENT - SPARE PARTS FOR ALL OF THE ABOVE - TECHNICAL CONSUMABLES - IT EQUIPMENT FOR CONTROLLING THE MANUFACTURING EQUIPMENT AND DATA TRAFFIC, SUCH AS SERVERS, SWITCHES AND CABLING - LABORATORY EQUIPMENT FOR QUALITY CONTROL PURPOSES Line was producing 20 to 40 microns , line can produce down to 10 to 12 microns Learn More

TT-7158 PASTEURIZING LINE 15,000 L/H, YEAR 2017 1. SEPARATOR WESTFALIA, MSA130-076-01 2. MILKPASTEURIZER SCHMIDT, 15000 L/H 3. REFURBISHED 2022 QUANTITY: 1 Learn More