Search results for: 'sewing'

FOR FILLING DOWN FEATHER PILLOWS
FILLING RANGE: 1 TO 120 GRAMS (70% FEATHER & 30% DOWN)
WEIGHING SYSTEM: 4 SETS
POWER: 4.5 KW
VOLTAGE: 220 / 380 V, 3-PHASE
AIR PRESSURE: 0.5 TO 0.7 MPA
ACCURATE WEIGHING RESULTS WITH TOLERANCE OF ONLY 1 GRAM
WORKING TABLE DIMENSIONS: 1200 x 2400mm (FOR CUSTOMERS FILLING PILLOWS AND QUILTS)
WORKING TABLE DIMENSIONS FOR PILLOWS ONLY: 1200 x 1200mm (EASIER TO FIT IN A 20 FOOT CONTAINER)
OPERATION CAN BE HANDLED BY ONLY 1 EMPLOYEE
INCLUDES ONE AUTOMATIC FILLING TABLE WITH FOOT SWITCH AND CLAMP DEVICE
THE WORKER STEPS ON THE FOOT SWITCH AND THE CLAMP DEVICE WILL RUN TO CLAMP THE PILLOW BAG
THE FILLING PROCESS AUTOMATICALLY STARTS TO FILL THE PILLOW AND AFTER FINISHING THE CLAMP DEVICE WILL RESET
DURING THIS PERIOD, THE WORKER MAY SEAL THE PILLOW WITH SEWING MACHINE
FOUR HOPPER SYSTEM FOR CONSTANT SUPPLY
ONE KEY FOR CHARGE AND RECHARGE REDUCES WASTED TIME
HIGH-QUALITY, RELIABLE ELECTRICAL COMPONENTS
PREPROGRAMMABLE FOR UP TO 50 GROUPS OF RECIPES WITH EACH RECIPE CONTAINING UP TO 60 SETS OF DIFFERENT FILLING PARTS FOR THE SAME PRODUCTION
FULLY ENCLOSED DESIGN TO KEEP ENVIRONMENT CLEAN AND REDUCE MATERIAL WASTE
AUTOMATIC, ACCURATE WEIGHING WITH LOAD CELL TO ENSURE PRODUCTION QUALITY
CE CERTIFICATE INCLUDED
FLOORSPACE 4000mm LONG X 3000mm WIDE X 2500mm HIGH
TABLE FOR PILLOWS IS 1200 X 1200mm

QUANTITY: 1

Learn More

R-4533 MAMMUT VMK SELECT DOUBLE LOCK CHAINSTITCH MULTI-NEEDLE QUILTER, YEAR 2014
2 BAR , 150m DISTANCE BETWEEN BARS
WIDTH UP TO 2700mm = 106 INCHES

MAMMUT VMK SELECT DOUBLE LOCK CHAINSTITCH MULTI-NEEDLE QUILTER
YEAR: 2014
96 SEPARATELY CONTROLLABLE NEEDLES
FULLY AUTOMATIC NEEDLE PLAN CHANGE
TOP AND BOTTOM THREAD CUTTER AT EACH SEWING POSITION
MATERIAL WIDTH UP TO 2700mm
TWO NEEDLE BARS
150mm SPACING
HANDWHEEL ADJUSTMENT OF HEIGHT OF PRESSER PLATE
ELECTRONIC THREAD BREAK DETECTOR FOR TOP AND BOTTOM THREADS
MATERIAL UNWIND DEVICE
RACKS FOR TOP AND BOTTOM THREAD
ONE CATWALK EACH ON FRONT AND REAR OPERATING SITE
TROUGH INFEED FOR UPPER MATERIAL WITH MOTOR-DRIVEN ROLLER SYSTEM
AUTOMATIC MARKING AND DETECTING UNIT FOR PATTERN CONFORM LATERAL CUT
ELECTRONICS AND MOTORS 400V, 3 PHASES
CONCRETE BASES AND VIBRATION DAMPERS

 

Learn More

REFERENCE NUMBER: L-6029

ARTIFICIAL GRASS CUT TUFTER, 5/8 GAUGE, 4100mm

 

SEWING WIDTH: 4100mm

GAUGE: 5/8”

VARIABLE ELECTRONIC DRIVE

BRAND NEW GRASS-CUT PILE

SINGLE INLINE INDIVIDUAL NEEDLE BAR

 

QUANTITY: 1

Learn More

COMPLETE ZIMMER CHROMOJET LINE, WIDTH 4000mm, YEAR 2000

WIDTH: 4000mm

YEAR: 2000

DPI: 1.666mm = 16 DOTS PER INCH (DPI)

2560 JETS

EACH PUMP WITH 256 JETS (10 PUMPS TOTAL)

JETS ARE IN GOOD CONDITION, TO PRINT ALL KINDS OF CARPETS OF ANY WEIGHT OR PILE HEIGHT 

CAN PRINT DOT OR HALF DOT

10 COLORS

COULD BE USED ALSO FOR BLANKETS

 

Learn More

BRAND TERROT
MODEL MKP 2
YEAR 1992
STATUS AVAILABLE
TERRAP MKP-2 (MODIFIED WITH MKP-3)  
E-10 SEWING MACHINE
WORKS ON ONE COLOR
KNIT READY 1.55 M
MACHINE WORKING

QUANTITY: 2

Learn More

REFERENCE NUMBER: L-3454
DIMENSIONS: 6200mm X 3880mm
STITCHING AREA: 4500mm X 2200mm
STITCHING SPEED: UP TO 2000PPM
STITCH LENGTH: 1 x 12mm
WEIGHT: 3200 KGS
MOTOR: SERVO

ACCESSORIES:
CONVEYOR TABLE: 8000mm X 2400mm

Learn More

S-1220 KUSTERS CALANDER AND EMBOSSING CALENDER, WORKING WIDTH 3400mm, YEAR 2002

KUSTERS CALANDER AND EMBOSSING CALENDER
MAKE: KUSTERS
YEAR: 2002
TYPE: 213.40/3400
WORKING WIDTH: 3400mm
3 CYLINDERS
COTTON – STEEL – RACOLAN
HYDRAULIC PRESSURE MAXIMUM 40 TONES
COMPLET ENTRY WITH METAL DETECTOR AND SEWING DETECTOR
5 DIFFERENT STEEL EMBOSSING CYLINDERS
PREPARED FOR OIL HEATING WITH PUMP AND VALVES
EXIT WITH SALVADE AXIAL A-FRAME ROLLING DEVICE
INCLUDING TWO MANUAL HAND CRANES
WITH FRAME TO CHANGE THE CYLINDERS

MACHINES ARE STILL RUNNING

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-4076

COMPLETE BLANKET MANUFACTURING PLANT, YEAR 1994 TO 2002

 

DYEING
OFFER 001

PRESS AIPA-CIMA

TYPE: PM / 2 (7 KW)

YEAR: 1994
QUANTITY: 1

 

OFFER 002

AUTOCLAVE AIPA

MODEL: HT 200 / D

YEAR: 1994

CAPACITY: 5700 LIT

4.5 BAR
QUANTITY: 1

 

OFFER 003

CENTRIFUGE CIMA IMPIANTI

YEAR: 1994

185 KW
QUANTITY: 1

 

OFFER 004

CRANE OMIS

WITH WINCH AND BASKET

YEAR: 1994

QUANTITY: 1

OFFER 005

DRYER SN. LUCIA LTD

2 DRUMS

HEIGHT: 1600mm

YEAR: 1994

QUANTITY: 1

OFFER 006

PRESS

TRANSPORT EQUIPMENT FOR WET FIBERS

FORKLIFTS

COMPRESSORS

ETC.

SPINNING

OFFER 007
FIBER MIXING PLANT

MODEL: 3652 AND 3660

MANUFACTURER: MECHANICAL CARESI LTD. AND T. BRACCIOLINI

YEAR: 1994
QUANTITY: 2

 

OFFER 008

BONINO CARDING MACHINE

MODEL: CA 83

YEAR: 1994

DELIVERY IN CANS
QUANTITY: 1

 

OFFER 009

RIETER DRAWING MACHINE SB2

YEAR: 1994

QUANTITY: 1

OFFER 010

RIETER OPEN END

MODEL: RL10

YEAR: 1994

QUANTITY: 1

OFFER 011

100 BARRELS FIBERS

COMPRESSOR

PALETTE FOR YARNS

TROLLEYS

ETC.

WEAVING

OFFER 012
HACOBA WARPER

MODEL: US-B

YEAR: 1994

WIDTH: 3000mm

SPEED: 20 TO 600 M/MIN
WITH CREEL 490 COILS

QUANTITY: 1

 

OFFER 013

SOMET THEMA SUPER-EXCEL

WIDTH: 3000mm

YEAR: 2001

WITH JACQUARD GROSSE

MODEL: EJP2

QUANTITY: 1

 

OFFER 014

SOMET THEMA EXCEL

WIDTH: 2200mm

YEAR: 2002
JACQUARD GROSS

MODEL: EJP 2
QUANTITY: 2

 

OFFER 015

SOMET THEMA 11E

WIDTH: 2200mm

YEAR: 1994
GROSSE JACQUARD

MODEL: EJP
QUANTITY: 9

 

OFFER 016

WITH 24 BEAMS

VARIOUS TROLLEYS

ETC.

FINISHING

OFFER 017
MARIO CROSTA SRL WOOLLY 2

MODEL: MC 10/30

YEAR: 1994
QUANTITY: 1

 

OFFER 018

WOOLLY MULLER GMBH

TRI 224

PR- 1

YEAR: 1994

WIDTH: 2200mm
QUANTITY: 2

 

OFFER 019

MULLER MOWERS

YEAR: 1994
QUANTITY: 3

 

OFFER 020

REAM OF STEAMING (SCREED) TO SANTA LUCIA

BRAND: FABRICS

YEAR: 1994

QUANTITY: 1

OFFER 021

COMPRESSOR

BOILER FOR STEAM VAPORAX 1000

ETC.

MAKING

OFFER 022
HEMING LINE FROM MAGETRON S, R, L

YEAR: 1995
QUANTITY: 1

 

OFFER 023

SEWING MACHINES

OF DIFFERENT TYPES AND MODELS

ETC.

OFFER 024
BOILER

WATER TREATMENT

OTHER PERIPHERICAL EQUIPEMENT

 

QUANTITY: 1 PLANT

Learn More

REFERENCE NUMBER: M-4081

JUDELSHON BIAS MACHINE AND SLITTER

 

THERE ARE SIX (6) PIECES TO THIS UNIT:

MODEL 220D (OFF ROLLER/FOLDER)

MODEL 220S (SEWING MACHINE WITH REROLLER FOR TUBULAR GOOD)

MODEL 220B - TWO PIECES (SPINNING UNROLLER AND CUTTER/REROLLER)

MODEL 360 SLITTER (71" LONG SHAFT)

MODEL 420 REROLLER

BIAS MACHINE CAN ACCEPT ROLLS UP TO 84" WIDE

THE SLITTER HAS A 15" BLADE

Learn More

REFERENCE NUMBER: K-5014 HOTMELT GLUING MATTRESS PRODUCTION LINE 2200mm 1000 MATTRESSES PER 8-HOUR SHIFT MAXIMUM WIDTH: 2200mm CAPACITY: 1,000 MATTRESSES PER 8-HOUR SHIFT 1ST BRIDGE: 3 PNEUMATICALLY MOVING GUNS WITH 4 NOZZLES ON EACH HOTMELT GUN. CAN BE CONVERTED TO SPRAY AT NO EXTRA COST. 2ND BRIDGE: 2 GUNS FOR THE EDGE: ONE HAS 8 NOZZLES (T-SHAPED), THE OTHER HAS 4 NOZZLES. 3RD BRIDGE: 3 PNEUMATICALLY MOVING GUNS. THEY ARE SPRAY; LINE NOZZLES CAN BE ADDED 4TH BRIDGE: EXACTLY THE SAME AS 3RD BRIDGE. FLOORSPACE DIMENSIONS: 72000mm X 13000mm QUANTITY AVAILABLE: 1 Learn More