Search results for: 'Open+and'

Z-1564 500 L LIQUID WASHING HOMOGENIZER MIXERS MAIN STRUCTURE: MIXING POT, ELECTRIC CONTROL SYSTEM, OPERATION PLATFORM ESTIMATED PRODUCTION TIME AND CAPACITY FOR REF • MIXING + HOMOGENIZER + HEATING • REMARK: 2 TO 2.5 HOURS PER BATCH, IF 8 HOURS PER DAY ABOUT 1500 IT’S TO 2000 DAY. • MIXING + HOMOGENIZER • REMARK: 2 HOURS PER BATCH, IF 8 HOURS PER DAY ABOUT 2000 IT’S DAY. • MIXING ONLY • REMARK: 1 TO 1.5 HOURS PER BATCH, IF 8 HOURS DAY, 2500 IT’S TO 4000 DAY. QUANTITY: 1 Learn More

REFERENCE NUMBER: A-2492 1000 L STABILITY CHAMBER SPECIFICATIONS: INNER CHAMBER SIZE: 1 X 1 X 1 mm EXTERNAL DIMENSION: 1.2 X 1.97 X 2.17 mm TEMPERATURE RANGE: 70 TO 180°C HUMIDITY RANGE: 10% TO 98% RH, WHEN THE TEMPERATURE IS ABOVE 60°C, THE HUMIDITY CAN ACHIEVE 10% RH TEMPERATURE & HUMIDITY FLUCTUATION: ±0.2℃, ±0.5% RH INDICATION RESOLUTION: 0.01℃, 0.1% RH TEMPERATURE & HUMIDITY UNIFORMITY: ±2℃, ±3% RH (TESTED WITH THE EMPTY CHAMBER, 30 MINUTES AFTER STABILIZATION) HEAT UP AND COOL DOWN TIME: HEATING RATE: AVERAGE 3 ℃/MINUTES; COOLING RATE: AVERAGE 1 ℃/MINUTE (UNLOADED TEST) MATERIAL: INNER CHAMBER: SUS#304 STAINLESS STEEL EXTERIOR STRUCTURE: STAINLESS STEEL PLATE + POWDER COATED INSULATION: GLASS WOOL & PUF PERSPIRATION RESISTANT: K STYLE TUBE ACCESSORIES • TEMPERATURE RESISTANT SILICONE GASKET: 1 PC • CABLE PORT:1 PC; OD: 100 mm • WINDOW LIGHT: 1 PC • MULTIPANE VIEW WINDOW: 1 PC • LOADING SHELVES: 2 PCS REFRIGERATION & HEATING SYSTEM • ORIGINAL IMPORTED HIGH EFFICIENCY COMPRESSOR • AIR COOLING CONDENSER • FIN – TUBE HEATER • ORIGINAL IMPORTED SOLENOID VALVES • INNER SPIRAL K – TYPE REFRIGERANT COPPER TUBE • U – TYPE FINNED ELECTRO - THERMAL TUBE • HEATING & COOLING SYSTEMS SEPARATED • SINGLE STAGE REFRIGERATING SYSTEM HUMIDIFYING & DEHUMIDIFYING SYSTEM • ELECTRIC & BYTE TYPE HUMIDIFYING SYSTEM • STAINLESS STEEL HUMIDIFYING BARREL WITH VIEW WINDOW FOR WATER LEVEL • ADP DEHUMIDIFYING WAY • OVER – TEMPERATURE AND OVERFLOW PROTECTION UNITS • HUMIDIFYING & DEHUMIDIFYING SYSTEMS SEPARATED CIRCLING & DRAIN SYSTEM • CENTRIFUGAL FAN & IMPORTED MOTOR • REVERSE UNIFLOW (AIR FLOW DIRECTION) • FLOW – THROWS WIND • DRAIN SYSTEM USES SWIRL TYPE OUTLET AND U – TRAP DEPOSITION UNIT PROGRAMABLE MICRO COMPUTER LCD TOUCH CONTROLLER • PROGRAMMABLE TOUCH CONTROLLER, USER - FRIENDLY, STABLE AND EASY USE • PROGRAMS: 99 SEGMENTS PER PROGRAM, 120 PROGRAMS, 120 CYCLING PER PROGRAM • PID & SSR CONTROL WAY, STABLE AND EASY USE • HAVE SLOP CONTROL FUNCTION FOR HEATING & COOLING, LINKED PTNS CAN BE EXECUTED • PID AUTOMATIC CALCULATION • MICRO COMPUTER MULTI FUNCTION CONTROLLER, MAIN COMPONENTS ’DATA AUTOMATICALLY OUTPUT INCLUDING COMPRESSORS, SOLENOIDS, HEATING UNITS, ETC • ERRORS OF MAIN COMPONENTS APPEAR ON THE LCD PANEL • THE BRIGHTNESS OF THE LCD PANEL CAN BE ADJUSTED • TIME SEQUENCE CONTROL INTERFACE RELAYS HAVE 3 GROUPS WHICH MANAGE THE OUTPUT OF OUTSIDE LOGIC UNITS INCLUDING SIGNAL, MECHANICAL AND POWER, ETC • PROGRAMS AUTO – SAVE FUNCTION IF POWER CUT OFF SUDDENLY • HAVE HOLD & ADV BUTTONS INPROGRAMS • AUTOMATICALLY SET THE HIGH & LOW TEMPERATURE LIMITS AFTER PROGRAMS SET • PASSWORD SET FUNCTION • SD CARD SLOT, 2 GB SD CARD, RS232 OR ETHERNET (RJ45) OPERATING ENVIRONMENT • AMBIENT TEMPERATURE: +25℃ (2) RH ≤85% PROTECTION • ELECTRICITY LEAK PROTECTION • LIGHTNING STRIKE PROTECTION, ZRN LIGHTNING ARRESTER INSIDE THE CONTROLLER • SENSOR DATES TRANSFERRED INSIDE THE MICRO COMPUTER • TEMP. SENSORS TO OPEN CIRCUIT OR SHORT CIRCUIT (+ - OVER) • THE FIRST LEVEL OVER TEMPERATURE PROTECTION • ERROR DETECTED UNITS • THE SECOND LEVEL OVER TEMPERATURE PROTECTION TO ELECTRONIC OVER - TEMP PROTECTION UNIT • THE THIRD LEVEL OVER - TEMPERATURE PROTECTION • COMPRESSOR PROTECTION TO REFRIGERANTS PRESSURE PROTECTION & OVERLOAD PROTECTION. • EXTENDED PROTECTION UNIT TO TWO SUPPLETIVE PORTS • ERROR PROTECTION TO POWER CUT OFF, ERROR REPORTS SHOWN IN LCD PANEL AND AUDIBLE ALARM STARTS • DYNAMIC HIGH AND LOW TEMPERATURE PROTECTION • AMBIENT TEMPERATURE PROTECTION TO THE INNER CHAMBER AND SPECIMENS AUTOMATICALLY RETURN BACK TO AMBIENT TEMPERATURE AFTER THE OPERATION STOP SAFETY PROTECTION • NON-FUSE PROTECTION SWITCH • OVERHEAT ALARM PROTECTION • COMPRESSOR OVERLOAD PROTECTION • PHASE SEQUENCE PROTECTION • MOTOR OVER TO CURRENT PROTECTION Learn More

REFERENCE NUMBER: T-6550

MEDICAL PROTECTIVE CLOTHING BLOOD SYNTHETIC PENETRABILITY TESTER

 

TECHNICAL SPECIFICATIONS AND CONFIGURATION:

1. THE INSTRUMENT ADOPTS AN AIR SOURCE THAT CAN PROVIDE (0.5 ~ 30±0.1) KPA PRESSURE TO CONTINUOUSLY PRESSURIZED THE SAMPLE, WHICH IS NOT RESTRICTED BY THE SPACE OF THE TEST SITE;

2. THE AIR PRESSURE RANGE CAN BE ADJUSTED FREELY, AND THE ADJUSTMENT RANGE (0.5 ~ 30) KPA;

3. COLOR TOUCH SCREEN DISPLAY AND OPERATION;

4. THE SAMPLE CLAMPING PAD IS PROCESSED WITH IMPORTED SPECIAL ALUMINUM PROFILES, WHICH IS LIGHT IN MATERIAL, CLEAN IN SURFACE AND NEVER RUSTS.

5. THE INSTRUMENT ADOPTS IMPORTED SPECIAL ALUMINUM WIRE DRAWING PANEL, EQUIPPED WITH METAL KEYS, SENSITIVE OPERATION, NOT EASY TO DAMAGE;

6. CLAMPING DEVICE FOR INSTRUMENT SAMPLES, EQUIPPED WITH LOCKING PROTECTION, TO PREVENT THE SYNTHETIC BLOOD FROM SPLASHING AROUND;

7. CLAMPING FORCE IS ACCURATE AND RELIABLE;

8. THE TEST TANK IS EQUIPPED WITH A SPECIAL PLACEMENT DEVICE, WHICH IS CONVENIENT FOR CUSTOMERS TO OPERATE;

9. THE TEST TANK IS PROCESSED WITH SPECIAL 316 STAINLESS STEEL, AND THE TOP IS EQUIPPED WITH A SPECIAL COVER FOR HIGH TRANSPARENT PROTECTION;

10. THE WASHER BELOW THE SAMPLE IS MADE OF HIGH-QUALITY PTFE MATERIAL AFTER SPECIAL PROCESSING;

11. SQUARE METAL BLOCK NET: OPEN SPACE ≥50°%; BENDING ≤5mm AT 30KPA;

12. INSTRUMENT TIME CONTROL ACCURACY ≤01 SECONDS;

13. THE SHELL OF THE INSTRUMENT IS MADE OF HIGH-QUALITY METAL BAKING PAINT, WHICH IS BEAUTIFUL AND GENEROUS.

14. EQUIPPED WITH PRINTER INTERFACE, CONNECTED TO THE PRINTER CAN DIRECTLY PRINT DATA REPORTS.

 

TECHNICAL PARAMETERS:

1. SAMPLE SIZE: 75mm X 75mm

2. TEST AREA: 28.26 SQUARE CENTIMETERS

3. AIR PRESSURE ADJUSTMENT RANGE (0.5 ~ 30) KPA

4. EXTERNAL SIZE: 500mm X 500mm X 500mm (L X W X H)

5. WEIGHT OF THE INSTRUMENT: 40 KG

6. POWER SUPPLY: AC220V, 50HZ,SCOPE OF SUPPLY: 1. ONE MAIN MACHINE; 2. TWO PTFE GASKETS; 3. TWO ORDINARY WASHERS; 4. ONE METAL BLOCKING NET; 5. A SET OF SPECIAL LOCKING TOOLS; 6. ONE HIGH-QUALITY SILENT AIR PUMP, [NOTE: SAFETY PRODUCTION LICENSE IS NOT INCLUDED]. 7. EQUIPPED WITH PRINTER INTERFACE; 8. ONE SAMPLE TEMPLATE; 9. ONE PRODUCT CERTIFICATE; 10. ONE COPY OF PRODUCT OPERATION MANUAL.

 

OPERATION INSTRUCTION:

INSERT THE AIR PUMP OUTPUT PIPE INTO THE OIL AND WATER SEPARATOR OF THE INSTRUMENT AS REQUIRED (PRESSURE 0.1-0.3MPA).

AFTER SWITCHING ON THE POWER, THE STARTUP INTERFACE (NAME OF THE DEVICE) IS DISPLAYED.

PRESS THE "ENTER" BUTTON TO ENTER THE TEST INTERFACE, AS SHOWN IN THE FOLLOWING FIGURE:

CLICK "SETTING” BUTTON, GET INTO PARAMETER SETTING SCREEN, AS BELOW THIS SCREEN CAN SET THE SYSTEM TIME, DATE AND TESTING TIME, AFTER SETTING, CLICK "SAVE” BUTTON TO KEEP THE SETTING DATA. (NOTE: IT REQUIRES 5 MINUTES IN THE STANDARD)

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: K-8416

G1 TONELLO 330 "CENTRIFUGING" INDUSTRIAL WASHING MACHINE-USED

 

G1 TONELLO 330

“CENTRIFUGING” INDUSTRIAL WASHING MACHINE

FRONTAL TYPE

FOR CHEMICAL “STONE WASH”

CAPACITY LIT. 3.300

MOD. TONELLO G1 330

GENERAL DESCRIPTION:

TONELLO G1 IS A MACHINE WITH HIGH-SPEED HYDRO-EXTRACTION (600 R.P.M.) AND IT IS EQUIPPED WITH AUTOMATIC SELF-BALANCING SYSTEM

TONELLO G1 IS SUPPLIED WITH “SETTABLE INVERTER”

ROTATION SPEED FROM 0 TO 55 R.P.M

ALSO SETTING THE CENTRIFUGING SPEED FROM 0 TO 600 R.P.M.

WITH TIME OF CENTRIFUGE PROGRAMMABLE BY INDUSTRIAL PC

THE ACCESS MAIN DOOR TO THE DRUM IS VERY WIDE, IN ORDER TO EASY GARMENTS LOADING AND UNLOADING OPERATION

OPENING AND CLOSING ARE PNEUMATIC

DOUBLE TILTING SYSTEM FOR GARMENTS LOADING AND UNLOADING

DRIVING SYSTEM IS SITUATED ON THE UPPER PART OF THE MACHINE

WITH PROPER MATERIAL AND MOTORS SUITABLE TO WORK AT LOW AND HIGH R.P.M.

1 TANK FOR THE PREPARATION OF AUXILIARY PRODUCTS WITH CAPACITY OF LITTERS 180 EQUIPPED WITH ELECTRO-PUMP AND PNEUMATIC VALVES FOR THE SENT ONE

THE DRAINAGE IN DRAIN AND AUTOMATIC RINSES N° 2 WATER INLETS COMPLETE WITH PNEUMATIC VALVE- MECHANICAL WATER-COUNTER DIRECT HEATING AND COOLING SYSTEM

AUTOMATION WITH MICROPROCESSOR

 

TECHNICAL DATA TONELLO G1 330

DRUM DIMESION                           

-DRUM HOLING SHEET                                   mm                        4

THICKNESS         

-DIAMETER                                                   MM                       1900

-DEPTH                                                        MM                       1150

-VOLUME                                                      LT.                       3300

-DOOR DIAMETER                                           MM                       1020

-MAXIMUM LOADING                                        KG.                      120/130

CAPACITY           

BASKET SPIN SPEED                                        RPM                      0-600

DIRECT STEAM CONNECTION                               Ø                        1" 1/4

WATER INLET CONNECTION                                 Ø                        2 x 2

COMPRESSED AIR INLET                                     Ø                        1/4"

CONNECTION   

STEAM IN MAXIMUM PRESSUREBAR                      BAR                       6

WATER IN MAXIMUM PRESSURE                           BAR                       4

COMPRESSED AIR IN MAXIMUM                           BAR                       8

PRESSURE          

POWER INSTALLED                                           KW                        22

3-PHASE VOLTAGE                                           VOLT/HZ                 400/50

PRODUCTS TANK Ø 240 H 400                             LT.                         80

TANK RINSING VALVE                                         Ø                         1/2"

MACHINE SIZE                  

-WIDTH                                                          MM                        2500

-WIDTH WITH ELECTRICAL PANEL                         MM                        2980

-DEPTH                                                           MM                        2710

-HEIGHT                                                          MM                        3000

Learn More

REFERENCE NUMBER: M-5282 (1313121ANW12RX) L COSMETIC ROUND PADS PACKAGING MACHINE INTO BAGS NEW IN STOCK COSMETIC ROUND PADS PACKAGING MACHINE INTO BAGS FULLY AUTOMATIC MACHINE FOR PACKAGING ROUND PADS MADE OF COTTON OR SYNTHETIC FIBERS FOR COSMETIC USE IN DRAWSTRING BAGS AND BAGS WITH ZIPPER/ZIP-LOCK MADE OF PLASTIC MATERIAL. THE MACHINE REACHES THE MAXIMUM PERFORMANCE OF ABOUT 30 BAGS PER MINUTE. QUANTITY AVAILABLE: 1 Learn More

TT-6802 TEMAFA/TRUTZSCHLER/F.O.R./AUTEFA/DILO NEEDLING LINE, WORKING WIDTH 5000mm, YEAR 1999 TO 2010 1. NEEDLING LINE 2. YEAR: 1999 TO 2010 3. WORKING WIDTH: 5000mm QUANTITY: 1 Learn More

TT-4532 RIETER OPEN END PLANT, 2400 ROTORS, YEAR 2006 TO 2010 THE PLANT STOPPED IN DECEMBER 2023 ELECTRICAL ENERGY 700 KW INSTALLED Learn More

TT-3711 COTTON OPEN END PLANT, 2080 ROTORS, YEAR 2000 TO 2010 Learn More

REFERENCE NUMBER: C-2876

RIETER SPINNING MACHINES, LABORATORY, DRAWING, COMBING, & CARDING, YEAR 2001

 

DETAILS:

 

OFFER 001

TOYODA SIMPLEX ACCESSORIES

SIMPLEX ACCESSORIES

TOYODA

YEAR: 2001

 

QUANTITY: 1

 

OFFER 002

USTER LABORATORY UT3

LABORATORY

USTER

MODEL: UT3

TYPE: YARN TESTING

YEAR: 2001

 

QUANTITY: 1 SET

 

OFFER 003

USTER LABORATORY AFIS

LABORATORY

USTER

MODEL: AFIS

TYPE: FIBER TESTING

YEAR: 2001

 

QUANTITY: 1

 

OFFER 004

USTER LABORATORY HVI

LABORATORY

USTER

MODEL: HVI

TYPE: FIBER TESTING

YEAR: 2001

 

QUANTITY: 1

 

OFFER 005

RIETER BLOW ROOM ACCESSORIES

BLOW ROOM ACCESSORIES

RIETER

TYPE: STAND ALONE

YEAR: 2001

 

QUANTITY: 1

 

OFFER 006

MINGCHENG BLOW ROOM ACCESSORIES

BLOW ROOM ACCESSORIES

MINGCHENG

TYPE: STAND ALONE

YEAR: 2001

 

QUANTITY: 2 SETS

 

OFFER 007

MINGCHENG BLOW ROOM ACCESSORIES

BLOW ROOM ACCESSORIES

MINGCHENG

TYPE: STAND ALONE

YEAR: 2001

 

QUANTITY: 2

 

OFFER 008

OTHERS STRENGTH TESTER LABORATORY

LABORATORY

OTHERS STRENGTH TESTER

TYPE: GENERAL

YEAR: 2001

 

QUANTITY: 1

 

OFFER 009

WELKER YARN CONDITIONING PLANT CONDIBOX

YARN CONDITIONING PLANT

WELKER

MODEL: CONDIBOX

YEAR: 2001

 

QUANTITY: 1

 

OFFER 010

MINGCHENG BLOW ROOM FLOCK FEEDER

BLOW ROOM

MINGCHENG

MODEL: FLOCK FEEDER

TYPE: AUTOMATIC BALE OPENER

YEAR: 2001

 

QUANTITY: 2

 

OFFER 011

MINGCHENG BLOW ROOM MPM

BLOW ROOM

MINGCHENG

MODEL: MPM

TYPE: MIXER

YEAR: 2001

 

QUANTITY: 2

 

OFFER 012

RIETER COMBER E75

COMBER

RIETER

MODEL: E75

YEAR: 2001

 

QUANTITY: 1

 

OFFER 013

RIETER COMBER E60

COMBER

RIETER

MODEL: E60

YEAR: 2001

 

QUANTITY: 1

 

OFFER 014

OTHERS DOGETECH BREAKER DRAWING WITHOUT AUTOLEVELLER DV2

BREAKER DRAWING WITHOUT AUTOLEVELLER

OTHERS DOGETECH

MODEL: DV2

YEAR: 2001

 

QUANTITY: 2

 

OFFER 015

OTHERS DOGETECH FINISHER DRAWING WITH AUTOLEVELLER DV2 AL

FINISHER DRAWING WITH AUTOLEVELLER

OTHERS DOGETECH

MODEL: DV2 AL

YEAR: 2001

 

QUANTITY: 3

 

OFFER 016

TOYODA SIMPLEX FL200

TOYODA

MODEL: FL200

YEAR: 2001

 

QUANTITY: 1

 

OFFER 017

RIETER FINISHER DRAWING WITH AUTOLEVELLER RSB D30

FINISHER DRAWING WITH AUTOLEVELLER

RIETER

MODEL: RSB D30

YEAR: 2001

 

QUANTITY: 2

 

OFFER 018

RIETER BREAKER DRAWING WITHOUT AUTOLEVELLER SB D10

BREAKER DRAWING WITHOUT AUTOLEVELLER

RIETER

MODEL: SB D10

YEAR: 2001

 

QUANTITY: 4

 

OFFER 019

RIETER CARDING C51

CARDING

RIETER

MODEL: C51

YEAR: 2001

 

QUANTITY: 15 SETS

 

OFFER 020

LOPTEX BLOW ROOM

BLOW ROOM

LOPTEX

TYPE: FOREIGN FIBER SEPARATOR

YEAR: 2001

 

QUANTITY: 1

 

OFFER 021

RIETER BLOW ROOM B60

BLOW ROOM

RIETER

MODEL: B60

TYPE: CLEANER WITH FEED TRUNK AND CONDENSOR (COTTON)

YEAR: 2001

 

QUANTITY: 2

 

OFFER 022

RIETER BLOW ROOM

BLOW ROOM

RIETER

TYPE: UNIMIX

YEAR: 2001

 

QUANTITY: 2

 

OFFER 023

RIETER BLOW ROOM B11

BLOW ROOM

RIETER

MODEL: B11

TYPE: PRE - CLEANER

YEAR: 2001

 

QUANTITY: 1

 

OFFER 024

RIETER BLOW ROOM B2/5

BLOW ROOM

RIETER

MODEL: B2/5

TYPE: WASTE OPENER

YEAR: 2001

 

QUANTITY: 1

 

OFFER 025

RIETER BLOW ROOM A11

BLOW ROOM

RIETER

MODEL: A11

TYPE: AUTOMATIC BALE OPENER

YEAR: 2001

 

QUANTITY: 1

 

OFFER 026

MINGCHENG CARDING

CARDING

MINGCHENG

YEAR: 2001

 

QUANTITY: 6

 

OFFER 027

MINGCHENG BLOW ROOM

BLOW ROOM

MINGCHENG

TYPE: AUTOMATIC BALE OPENER

YEAR: 2001

 

QUANTITY: 2

Learn More

REFERENCE NUMBER: M-4249 (10105MNAD9UC) K SANTEX OPEN WIDTH COMPACTOR YEAR 1996 WIDTH 2200mm SANTEX OPEN WIDTH COMPACTOR WIDTH 2200mm TYPE SANTACOMPACT YEAR 1996 CONSISTS OF: TENSION BAR, LATTICE ROLL GUIDER W/FULL WIDTH SENSOR OPERATOR PLATFORM, OPEN VERTICAL PIN TENTER FOR KNITS, TANDEMATIC SPLIT LEVEL UNCURLERS, OVERFEED, PINNING BRUSHES, STEAMING SECTION, RAIL GUIDES, GUMMING, SELVEDEGE TRIMMING, OPEN WIDTH COMPACTOR FELT TYPE SCRAY, 2 ROLL BATCHER WITH EDGE GUIDING AND INSPECTION BOARD. QUANTITY: 1 Learn More