Search results for: 'Power''

REFERENCE NUMBER: M-5102 (1212FPDWXX11) L NEGATIVE & POSITIVE RAPIER HERCULES WEAVING MACHINES WIDTH 5500mm – FOR HEAVY FABRICS NEGATIVE & POSITIVE RAPIER HERCULES H5500 WEAVING MACHINES 20 SHAFTS NOMINAL WIDTH 5500mm MAXIMUM REED WIDTH 5500mm MINIMUM REED WIDTH 4400mm STANDARD BASIC MACHINE FOR VOLTAGE 440 V AND FREQUENCY OF 60 HZ DIRECT DRIVE MOTOR, SPEED CONTROLLED BY MICROPROCESSOR WITHOUT CHANGE OF PULLEY, WITHOUT CLUTCH SYSTEM, WITH (15%-40%) ELECTRIC POWER SAVING DEPENDING FROM TYPE OF WOVEN FABRIC SHEDDING MACHINE: STAUBLI DOBBY MODEL 2668 20 RODS SHAFTS TYPE GROB HEALD FRAME WITH UNDER MOTION 20 LEVER DRC CASTLE ELECTRIC CABINET WITH MICROPROCESSOR, ELECTRONIC PICK FINDING, ELECTRONIC LET-OFF, ELECTRONIC TAKE-UP UNIT WITH INDEPENDENT MOTOR ELECTRONIC WEFT COLOUR SELECTOR IN EXECUTION FOR 8 COLORS TAKE-UP WITH ROLLER DIAMETER 219mm 6 TWIN BEAM DIAMETER 219mm WITH FLANGE 1000mm Q3 JUMBO BACK REST BAR FOR HERCULES WEFT DENSITY VARIABLE PROGRAMMABLE BY THE OPERATOR AT YOUR CHOICE HORIZONTAL CREEL 4 COLOURS AND SUPPORT FOR 8 CONE 4 WEFT FEEDERS ROJ CHRONO X3 3 WEFT BRAKES FOR EVERY CHRONO X3 (TOTAL 12 PCS) TO BE SELECT AS PER CUSTOMER WEFT YARN WEFT CONTROLLING UNIT ELTEX MODEL G3W. DEROULÈ LATERAL MINI CREELS SUPPORT FOR 24 CONES LATERAL MOTORIZED LENO SYSTEM HEATING SCISSOR-CUTTING LATERAL TEMPLES: TO BE DEFINED DEPENDING THE FABRIC CHARACTERISTIC 20 FRAMES GROB TYPE 331 C TYPE DRC S227 GROBTEX ALFIX-U 14.000 GROB HEALDS TYPE 8 X 3.8 TYPE GROZ AETEX SP 0.38 331 8.0X3.8 I CR (7000PCS PER PACK) 1 WARP STOP MOTION 6-30 GROB FKW LED 14.000 GROB DROP WIRE TYPE GROZ EOU 1405 180X11X0.50 ZN (2000PCS PER PACK) SETS OF NEGATIVE RAPIERS & TAPE (LEFT AND RIGHT SIDE) SETS OF POSITIVE RAPIERS & TAPE (LEFT AND RIGHT SIDE) POSITIVE RAPIER KIT (FULL COMPONENT) CENTRAL GEARBOX ALREADY INSTALLED AND COLOR SELECTOR ALREADY ASSEMBLED FOR POSITIVE VERSION APPLICATION (TO REDUCE TIME OF CONVERSION) SETS AND EQUIPMENT OF LOOM TOOL CASE WITH TOTAL TOOLS LIKE TECHNICIANS INCLUDING NR. 2 TORQUE TOOL EXTRA SPARE PARTS THE TOTAL MACHINE SUPPLY WILL ALSO INCLUDE 2 SETS OF NEGATIVE RAPIERS (LEFT AND RIGHT SIDE) 2 SETS OF NEGATIVE TAPES (LEFT AND RIGHT SIDE) 2 SETS OF POSITIVE RAPIERS (LEFT AND RIGHT SIDE) 2 SETS OF POSITIVE TAPES (LEFT AND RIGHT SIDE) 1 POSITIVE RAPIER KIT (FULL COMPONENT) 1 SET AND EQUIPMENT OF LOOM 1 TOOL CASE WITH TOTAL TOOLS LIKE TECHNICIANS INCLUDE 2 TORQUE TOOLS EXTRA SPARE PARTS 1500EUR/MACHINE WARRANTY: ONE YEAR FROM MACHINE ERECTION OR AFTER 3 MONTHS DELIVERY DATE QUANTITY: 1 Learn More

A) HOPPER MODEL L1500 MIXING SYSTEM B) OPENER MODEL F1000 – FOR THE FIRST OPENING OF THE FIBERS C)DISPENSER SILOS MODEL C5 D) SHREDDING MACHINE – SHREDDING FOAM MODEL F430 E) FILLING MACHINE WITH ELECTRONIC CONTROL WEIGHT MODEL W11 F) SPECIAL SEWING MACHINE MODEL 164C Learn More

DY-200BK SEMI-AUTOMATIC HYDRAULIC BALING PRESS FEATURES: WITH OPEN-CASE STRUCTURE AND SIMPLE MAINTENANCE OPERATION, IT IS SUITED TO DIFFERENT CLASSES AND WATER-CONTENT COTTON AND COMPRESSED PACKING OF CHEMICAL FIBER, FLUFF, FEATHER, HEMP AND GRASS ETC. Learn More

REFERENCE NUMBER: M-1943

BELT PUNCHING LINE YEAR 1996 (DYE CUTTER WITH CONVEYOR TRANSPORT)

 

BRAND: HANDSAEME

SIZE: 2250mm X 2000mm – HYDRAULIC POWER OF 150 TONS

PUNCHING IS DONE ON A TRANSPORT BELT.

PUNCHING ADJUSTABLE HEIGTH TILL 200mm

PRESSURE CAN BE ADJUSTED

PRESSURE IS DELIVERED BY A HYDRAULIC GROUP IN CONNECTION WITH A MECHANICAL LEVER 

CAN BE USED ON FOAM

SOME DYES INCLUDED

NEW DYES CAN BE ORDERED

 

IN EXCELLENT CONDITION, USED ONLY OCCASIONALLY

Learn More

REFERENCE NUMBER: M-4089 (990DJSKXX8) L

COMPLETE RIETER RING SPINNING & YARN DYE FACTORY – 37,056 SPINDLES- will sell individually

 

FACTORY WAS PRODUCING VARIOUS SPECIALTY YARNS FOR USE IN APPAREL AND TECHNICAL TEXTILES

ALL RING FRAMES SHORT STAPLE FOR FIBERS UP TO 40mm, 220mm TUBES, APPROXIMATELY HALF OF THE RING FRAMES ARE WITH PINTER CORE DEVICE OR AMSLER SLUBBING DEVICE. AMSLER AND PINTER AVAILABLE TO SELL SEPARATELY.

 

CARDING

COMBERS

ROVING/FLYERS

RING SPINNING

WINDING

TWISTING

COMPLETE YARN DYE HOUSE & DYE LAB

 

QUANTITY AVAILABLE: 1

Learn More

REFERENCE NUMBER: M-5164 (121247PRC11U) L VERTICAL BORDER QUILTING MACHINE TACK & JUMP WITH 4 JUKI HEADS WIDTH 400mm VERTICAL BORDER QUILTING MACHINE TACK & JUMP WITH 4 JUKI HEADS WORKING WIDTH 400mm 15.7 INCHES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5003 (1212FJWLHH11) L FIBER OPENING MACHINES DIFFERENT KINDS OF FIBER OPENING MACHINES – CAPACITY 220KG/H, 250KG/H, 300KG/H, 400 KG/H, 550KG/H. THE FIBER OPENING MACHINE IS ALSO CALLED AN OPENER – MAINLY SUITABLE FOR OPENING COTTON, POLYESTER STAPLE FIBER, WOOL, POLYESTER WADDING, AND SCRAP MATERIALS WITHIN 64mm. ALL THE WORK ROLLERS GO THROUGH DYNAMIC BALANCE PROCESSING, NO VIBRATION AND LOW NOISE IN THE OPERATION. TO USE THE FORCE GENERATED BY LONG FINE-TOOTH AND MULTI-TOOTH ROLLER’S REVERSE OPERATION STRENGTHENS THE LOOSENING ACTION, MAKING FIBER COTTON OR STAPLE FILAMENT OPEN TO BEST EFFECT. THE POWER DISTRIBUTION, IN ACCORDANCE WITH INTERNATIONAL ELECTRIC TECHNICAL STANDARD, COMPLIES WITH SAFETY STANDARDS OF AUSTRALIA, EU, AND NORTH AMERICA (MODEL 001) FIBER OPENING MACHINE CAPACITY: 250KG/H DIMENSION: 1350mm x 1220mm x 950mm WEIGHT: 550KG (MODEL 002) FIBER OPENING MACHINE CAPACITY: 280KG/H DIMENSION: 1800mm x 1220mm x 1050mm WEIGHT: 750KG (MODEL 003) FIBER OPENING MACHINE CAPACITY: 300KG/H DIMENSION: 3350mm x 1500mm x 1350mm WEIGHT: 1480KG (MODEL 004) FIBER OPENING MACHINE CAPACITY: 400KG/H DIMENSION: 2000mm x 1350mm x 1150mm WEIGHT: 1100KG (MODEL 005) FIBER OPENING MACHINE CAPACITY: 550KG/H DIMENSION: 2350mm x 1500mm x 1350mm WEIGHT: 1400KG QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5129 (121224NSV11UF) L AUTOMATIC BONNELL SPRING COILING MACHINE PRODUCTION: 60 SPRINGS/MIN MODEL: CL-70A SPRING TYPE: BONNELL QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: F-1363 FABRIC AND QUILTED FABRIC WASTE CUTTING MACHINE THIS MACHINE IS SUITABLE FOR CUTTING FABRIC WASTE, QUILTED FABRIC WASTE, AND FOAM WASTE INTO SMALL PIECES. THE MATERIAL SIZE IS ADJUSTABLE. DIMESNIONS: 3200 X 1000 X 1100mm POWER: 5.5kW CAPACITY: 400kg PER HOUR NET WEIGHT: 600kg QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: F-1364 FABRIC AND QUILTED FABRIC WASTE CUTTING MACHINE THIS MACHINE IS USED MAINLY FOR FABRIC WASTE, QUILTED FABRIC WASTE, AND FOAM WASTE CUTTING AND RECYCLING. EQUIPPED WITH 2-SERIES CUTTERS TO CUT THE MATERIALS INTO SMALL PIECES. THE CUTTING TOOL IS SHARP AND DURABLE. SUITABLE FOR CUTTING SOFT MATERIALS. SAVE ON COSTS BY MAKING FULL USE OF FABRIC WASTE QUILTED FABRIC WASTE. DIMENSIONS: 3100 X 3550 X 1360mm POWER: 11kW CAPACITY: 400kg PER HOUR NET WEIGHT: 1200kg QUANTITY AVAILABLE: 1 Learn More