Search results for: 'automatic+cutting+machine'

YY-3146 PET / NEW FLAKES OR REGENERATED MATERIALS EXTRUSION LINE THE PLANT WAS USED IN FULLY CONTINUOUS OPERATION WHICH MEANS 24 / 7 FOR 350 DAYS PER YEAR. BULK MATERIALS OF ALL TYPES (PET BOTTLE FLAKES, RESINS / GRANULE CHIPS, REGRINDS OF VARIOUS TYPES OF MATERIALS AND AGGLOMERATES) WERE USED AS INPUT MATERIAL FROM THE EUROPEAN MARKET, BUT ALSO FROM ALL OVER THE WORLD. THE REGENERATED FIBERS PRODUCED WERE BETWEEN 3 DEN AND 25 DEN AND COULD BE USED FOR MANY DIFFERENT APPLICATIONS, SUCH AS AUTOMOTIVE, GEOTEXTILES, TECHNICAL TEXTILES AND ALL GENERAL TEXTILE SECTORS – ALWAYS IN 100% RECYCLED FIBERS. PREDOMINANTLY THE LINE WAS PRODUCING A HIGH QUALITY BLACK STAPLE FIBER! Learn More

TT-3438 SYSCO DIE CUTTING MACHINE, 63” X 39”, YEAR 2005 QUANTITY: 1 Learn More

YY-2071 AUTOMATIC FOUR-SIDE HEMMING MACHINE, SEWING WIDTH 1000 TO 2400mm-PRODUCTION SPEED: 2 TO 3 PIECES/MINUTE DETAILS: TECHNICAL PARAMETERS DIMENSIONS (L X W X H): 3235 X 4065 X 2035mm SEWING WIDTH: 1000 TO 2400mm MAXIMUM SEWING THICKNESS: 80mm STITCH LENGTH: 3 TO 12mm POWER: 10 KW GROSS WEIGHT: 2800 KG VOLTAGE: 220 VOLTS OR 380 VOLTS, 50Hz/60Hz, 3-PHASE PRODUCTION SPEED: 2 TO 3 PIECES/MINUTE QUANTITY: 1 Learn More

REFERENCE NUMBER: K-5174 FOAM PROFILE CUTTING MACHINE CONSISTING OF A REVERSING CUTTING UNIT FOR THE MANUFACTURING OF ALMOST EVERY THREE-DIMENSIONAL FORM PART FROM ELASTIC FOAM BY MEANS OF A GIVEN MOULD QUANTITY AVAILABLE: 1 Learn More

TT-6933 SUCKER-MULLER-HACOBA SIZING MACHINE WITH DIRECT WARPER, WIDTH 4200mm, YEAR 2002 1. SIZING MACHINE BRAND SUCKER-MULLER-HACOBA 2. WIDTH 4200mm 3. YEAR: 2002 QUANTITY: 1 Learn More

REFERENCE NUMBER: K-0272 CATTLE SLAUGHTER LINE 60 PER HOUR SHIFT PRODUCTION: 100 TONS (60 CATTLE PER HOUR) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3973 (99016AVEZ8RX)-D HOTMELT POWDER SCATTERING AND LAMINATING MACHINE-2200mm 1.LAMINATING LINE : MAKE : VILLARS (CH) ACTUALLY SANTEX YEAR: 1993 WORKING WIDTH : 2200mm (NOMINAL WIDTH 2M10) VOLTAGE: 3X380(400)V TOTAL POWER : 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION : INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997) : 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS : 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED 2.ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM : MAKE : MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR: 1999 OPERATING VOLTAGE : 3X380V CAPACITY ACCUMULATOR : +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) 3. SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE : MAKE: MENZEL YEAR: 2000 OPERATING VOLTAGE : 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT KNOWN PROBLEM : PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) 4.MISCELLANEOUS : SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS Learn More

TT-4117 TEXMA FABRIC SEWING AND CUTTING MACHINE, WORKING WIDTH 1850mm, YEAR 2017 QUANTITY: 1 Learn More

YY-2290 SIX SHAFT AUTOMATIC BALONEY SLITTER WITH AUTOMATIC TURRET CHANGE 1800mm (72") WIDE, OTHER WIDTHS AVAILABLE SPECIFICATIONS: ROLLER WIDTH: 1800mm; CUTTING WIDTH: 2mm TO 1700mm; PAPER CORE I.D.: MAXIMUM 77mm CHANGEABLE; CUTTING DIAMETER: MAXIMUM 160mm; AIR SOURCE: 5 KG (PREPARED BY USER). QUANTITY: 1 Learn More

TT-1678 ROUND CLEANING PAD MAKING MACHINE WITH EMBOSSING, WIDTH 380mm MOTHER ROLL WIDTH: 380mm OUTPUT LINE: 6 LINES MOTHER ROLL QUANTITY: 4 PIECES FINISHED PAD DIAMETER: 57mm MOTHER ROLL MATERIAL: SPUNLACE NON-WOVEN FABRIC PRODUCTION SPEED: 2500 TO 3000 PIECES/MINUTE RATED VOLTAGE: 380 VOLTS (OR 220 VOLTS) RATED FREQUENCY: 50Hz (OR 60 Hz) TOTAL POWER: 3.5 KW DIMENSIONS: LENGTH 5500mm × WIDTH 1200mm × HEIGHT 2000mm WEIGHT: 2500 KG QUANTITY: 1 Learn More