Search results for: 'heating wi'

REFERENCE NUMBER: A-1116 MONFORTS MONTEX 14G/K STENTER FRAME YEAR 1991 ROLLER WIDTH 2400mm – VERTICAL PINCHAIN, 7 ZONES YEAR 1991 7 compartments Vertical pinchain Working width 2400 mm Roller width 2600mm THERMOFLUID-heating Overfeeding Selvedge uncurlers and – Glueing system Long entry with steaming compartment with at entry Double axial unrolling system MONFORTS padder 2 bowls at exit cooling compartment and axial batching as well as plaiter. QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-4608 (11116SWJK10R) L VILLARS-SANTEX HOTMELT POWDER SCATTERING AND LAMINATING MACHINE YEAR 1993 WIDTH 2100mm LAMINATING LINE MANUFACTURER: VILLARS (CH) ACTUALLY SANTEX YEAR OF CONSTRUCTION: 1993 WORKING WIDTH: 2200mm (NOMINAL WIDTH 2100mm) OPERATING VOLTAGE: 3X380(400)V TOTAL POWER: 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION: INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997): 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS: 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED. ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM MANUFACTURER: MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR OF CONSTRUCTION: 1999 OPERATING VOLTAGE: 3X380V CAPACITY ACCUMULATOR: +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE MANUFACTURER: MENZEL YEAR OF CONSTRUCTION: 2000 OPERATING VOLTAGE: 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT. KNOWN PROBLEM: PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) MISCELLANEA SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS CAN BE INSPECTED BUT NOT IN PRODUCTION MACHINE WILL BE DISMANTLED AT END OF NOV 2014 QUANTITY AVAILABLE: 1 Learn More

BRUCKNER STENTER MODEL SPLITFLOW TWINAIR YOC 2002 Learn More

ROLLER WIDTH 3400 mm SUITABLE FOR FABRIC WIDTH OF 3200 mm, HORIZONTAL COMBINED PIN AND CLIP CHAIN WITH 6 CHAMBERS GAS HEATED, COMPRISING OUT OF HIGH CLOTH FEEDING DEVICE FROM A-FRAME OR PLAITED FABRICS, STAINLESS STEEL GUIDING AND DEVIATING ROLLERS AND ENTRANCE INTO MAHLO WEFT/BOW STRAIGHTENER RVMC 12/3200, ENTRANCE INTO STENTER FRAME WITH OPTOELECTRONIC WIDTH CONTROL MAKE ERHARDT & LEIMER FR SERIES, ENTRANCE CHAIN 3 MTR, 6 CHAMBERS GAS HEATED, MECHANICAL MACHINE SPEED 5-100 M/MIN, HEAT RECOVERY DEVICE, DELIVERY OF FABRIC ONTO BIG BATCHING MOTION WITH PREINSTALLED COOLING CYLINDER, EXIT 3 MTR LONG, SPLIT FLOW SYSTEM FOR UPPER AND LOWER HEATING OF FABRIC, MACHINE IS WITHOUT PAD MANGLE. Learn More

TT-8706 KARL MAYER ROTAL SINGLE-END SIZING UNIT TYPE FILSIZE-S-F-1800, WORKING WIDTH 1800mm, YEAR 2018 1. KARL MAYER ROTAL SINGLE-END SIZING UNIT 2. TYPE FILSIZE-S-F-1800 3. YEAR OF CONSTRUCTION 2018 4. WORKING WIDTH 1800mm QUANTITY: 1 Learn More

TT-8592 REGGIANI STENTER, WORKING WIDTH 3200mm, YEAR 2002, 8 CHAMBERS 1. REGGIANI STENTER 2. WORKING WIDTH MAX. 3200mm 3. YEAR 2002 4. HEATING: GAS QUANTITY: 1 Learn More

TT-8183 SOLAR T70 GENERATOR SET – NEW, 7MW, YEAR 2017, 50 Hz 1. T70 SOLAR GENERATOR SET MAIN ENGINE (GENERATOR, GAS TURBINE ENGINE, BASE, GEARBOX, STARTING SYSTEM, LUBRICATION SYSTEM, FUEL SYSTEM, CONTROL & MONITORING SYSTEM), 1200 X 420 X 435, WEIGHT: 65T, QUANTITY: 1 2. LADDER + PLATFORM, 500 X 220 X 110, WEIGHT: 2500KG, QUANTITY: 1 3. PROTECTIVE RAILING + TUBING, 510 X 230 X 200, WEIGHT: 150KG, QUANTITY: 1 4. EXHAUST MUFFLER HOUSING, 370 X 280 X 170, WEIGHT: 1000KG, QUANTITY: 1 Learn More

TT-7982 REGGIANI STENTER, WORKING WIDTH 3200mm, 8 CHAMBERS, YEAR 2002 1. WORKING WIDTH MAX. 3200mm 2. YEAR 2002 3. HEATING: GAS QUANTITY: 1 Learn More

TT-7627 THIES TUMBLER, WORKING WIDTH 3000mm, YEAR 2007 – FOR TERRY FABRICS 1. THIES TUMBLER 2. YEAR 2007 3. TYPE: T 150 / 3000 QUANTITY: 1 Learn More

TT-5927 BRUCKNER STENTER VERY SUITABLE FOR TERRY FABRICS, WORKING WIDTH 3200mm, YEAR 2007 BRUCKNER STENTER VERY SUITABLE FOR TERRY FABRICS TYPE VN-SFP32/4 YEAR 2007 QUANTITY: 1 Learn More