Search results for: 'Power''

REFERENCE NUMBER: M-4460 (101012ABA9UF) K TRUETZSCHLER HSR 100 DRAW FRAMES YEAR 2002 – CAN 16” AND 18” TRUETZSCHLER HSR100 DRAW FRAMES YEAR 2002 CAN SIZE: 16” AND 18” CAN CHANGER: AUTOMATIC TYPE OF CREEL: POWER CREEL AUTOLEVELLER: AVAILABLE QUANTITY AVAILABLE: 8 Learn More

REFERENCE NUMBER: M-4755 (111195DBJ10RL) L BABCOCK STENTER YEAR 1991 WIDTH 2000mm – 8 CHAMBERS (1) X BABCOCK STENTER – 5000 – 5800 TYPE YEAR 1991 8 CHAMBERS (TOTAL LENGTH OF THE DRYING TUNNEL MT. 24 WORKING WIDTH 2000mm BLOWERS MODEL JET-STAR WITH AIR CIRCUIT CIRCULATION TYPE ECON-AIR POSSIBILITY TO ADJUST AIR FLOW INDEPENDENTLY UPPER AND BELOW GAS HEATING SYSTEM HORIZONTAL PIN CHAIN CONICAL INPUT FIELD LENGTH MT. 3.5 TOTAL OVERFEEDING FOR NEEDLE CHAIN (+50%) ENTRY WITH E+L CONICAL FIELD REGULATOR MODEL KR-40 WITH FR1501 PHOTOCELL FEELER GROUP BIG ROLL ARM DEVICE FOR FABRIC OUTPUT ON A-FRAME TROLLEYS SPEED ADJUSTABLE FROM 7.5 TO 150 MT/MIN MACHINE IS PROVIDED OF: (1) X BABCOCK IMPREGNATING/SQUEEZING PADDER – 5805 TYPE 2 CYLINDERS WITH ROLLER WIDTH 2000mm (WORKING WIDTH 1850mm) STAINLESS STEEL IMPREGNATING THROUGH - 2 STAINLESS STEEL EXTERNAL TANKS WITH MIXER D.C. DRIVE WITH SYNCHRONIZATION (1) X MAHLO WEFT STRAIGHTENER RFMC TYPE – 4 OPTICAL HEADS (1) X VACUUM EXTRACTOR WITH FILTER AND WATER RECOVERY – VACUUM PUMP WITH 30HP POWER – TO EXTRACT WATER FROM DELICATE FABRIC BYPASSING THE SQUEEZING PADDER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4305 (101018CYA9RX) J INSPECTION/ROLLING MACHINE "TESTA" EUREKA YEAR 1992 -2200mm MAİN OPERATİONS OF THE MACHİNE: • CHECK THE FABRİC • CUT THE FABRİC • FABRİC TAKİNG UP İN ROLL • PACKİNG THE FABRİC • AUTOMATİC WEİGHİNG AND LABELLİNG TECHNİCAL CHARACTERİSTİCS: • FULLY AUTOMATİC MACHİNE • WİNDİNG: MİNİMUM DİAMETER 100MM. • WİNDİNG: MAXİMUM DİAMETER 500MM. • MİNİMUM WORKİNG FABRİC 800MM. • MAXİMUM WORKİNG FABRİC 2.200MM. • ROLLS: MAXİMUM WEİGHT KG.100 • MAXİMUM POWER İNSTALLED 27 KW • COMPRESSED AİR PRESSURE 6/7 BAR • ADJUSTABLE TENSİON FABRİC • HARDNESS OF ROLL ADJİUSTABLE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4790 (111172SN10UF) L TRIM PICKER/TRIM OPENER TRIM PICKER/TRIM OPENER PACKED WITH FUMIGATED WOOD CASE SIDE OPENER IS SINGLE CYLINDER DESIGN – CAN ONLY BE USED FOR NEEDLE PUNCHING EDGE MATERIALS – NOT FOR ALL KINDS OF WASTE TEXTILES IN IRREGULAR SHAPE SUITABLE FOR NONWOVENS THE LEFTOVER MATERIAL HAVE THE LOOSE AND RECYCLING SIDE OPENER CAPACITY ≤25 KG/H POWER: 10.1 KW FEEDING IN BY HIGH QUALITY PIANO SPRING BOARD STAINLESS STEEL UNDERSCREEN AND OUTPUT FILTER BY BLOWER SIDE OPENER WORKING WIDTH IS 800mm LEFTOVER OPENER MEANS “EDGE OPENER” NOT BIG ENOUGH FOR 20FT CONTAINER, IT IS A VERY SMALL MACHINE MAIN CYLINDER SPEED: 700 TO 800 RPM CLOTHING ON THE CYLINDER IS SAWTOOTH TYPE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3973 (99016AVEZ8RX)-D HOTMELT POWDER SCATTERING AND LAMINATING MACHINE-2200mm 1.LAMINATING LINE : MAKE : VILLARS (CH) ACTUALLY SANTEX YEAR: 1993 WORKING WIDTH : 2200mm (NOMINAL WIDTH 2M10) VOLTAGE: 3X380(400)V TOTAL POWER : 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION : INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997) : 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS : 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED 2.ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM : MAKE : MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR: 1999 OPERATING VOLTAGE : 3X380V CAPACITY ACCUMULATOR : +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) 3. SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE : MAKE: MENZEL YEAR: 2000 OPERATING VOLTAGE : 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT KNOWN PROBLEM : PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) 4.MISCELLANEOUS : SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS Learn More

COMPUTER SHUTTLE LOCK STITCH MULTI-NEEDLE QUILTING MACHINE Learn More

JAMES HUNTER MACHINE CO Learn More

MACHINE DIMENSIONS: 2200 X 800 X H. 1550 CM NET WEIGHT: 180 KG POWER: 380V THREE PHASE KW. 2.5 COMPRESSED AIR: 3 BARS COMMODITY CODE: 8445.19.29 Learn More

REFERENCE NUMBER: M-3678 (880RUDGXX7) L (FOR SALE IN THE FUTURE) GRIBETZ QUILTER (BLUE COLOR) – CHAIN - COMPUTER TYPE/MODEL: GI-2300 CHAIN/COMPT. MACHINE SIZE: 90” ULTRA 12 NEEDLE SPACING: 1×3×6 MACHINE WIRED: 220V 3PH 60HZ AUX. TRANSFORMER: 440V 3PH 60HZ INCLUDES: (2) THREAD RACKS (1) CAT WALK (1) CLOTH TRAY (1) TRANSFORMER (1) CONTROL PANEL (2) CIRCULAR BLADES ON THE BACK (88) LOOPERS CONTROL PANEL: (1) NEMATRON-OPTI TOUCH SCREEN (1) DRIVE: MSC 850 (2) DRIVE: RAD02-2033 POWER SOURCE: 200/220/230 TOSHIBA CORPORATION (A) SERIAL NO.: 92 1296 (B) SERIAL NO.: 92 1301 (1) DRIVE: MITSUBISHI E500 QUANTITY AVAILABLE: 1 Learn More

PS-HF AUTOMATIC POCKET SPRING MACHINE COMPACT DESIGN/ELECTRO-MECHANICAL CONVEYOR ARE CONTROLLED BY SERVO/ACCURATE MOTIONS INTELLIGENT SENSORS CAN CHECK MALFUNCTIONS ALL THE TIME/DISPLAY CORRESPONDING ALARM ON THE HIM DULY/ONE OPERATOR CAN RUN SEVERAL SETS OF PS-HF ALONE UNIQUE PATENTED SPRING CONVEYOR DESIGN INCREASES PRODUCTIVITY AND EFFICIENCY VERY OPERATOR USER-FRIENDLY NON-WOVEN JOINT DEVICE/SAVE TIME AND NON-WOVEN AUTOMATIC CUTTER FOR THE POCKET SPRINGS CAN BE SELECTED AS AN ADDITIONAL PART ULTRASONIC HORN IS MADE OF TITANIUM/DURABLE AND FIRM MOVABLE TEMPER FOR VARIABLE SPRING HEIGHTS LOW AND EASY MAINTENANCE, EASY TO OPERATE/SHORT TRAINING PERIOD SPARE PARTS ARE “OFF THE SHELF” SPRING TYPE: BARREL/CYLINDRICAL FABRIC MATERIAL: 65~90G/M2 FABRIC ROLL DIAMETER MAXIMUM 600mm POWER SUPPLY: 380V, 50/60HZ, 12KVA, INPUT FUSE 63A AIR CONSUMPTION: 30M3/H, 0.8 MPA PERFORMANCE: 60 SPRINGS/MINUTE WORKING TEMPERATURE: +5°C +45°C WEIGHT APPROXIMATELY 2260KG DORSAL SEAL TYPE (UNIT: mm) WIRE DIAMETER SPRING DIAMETER IN THE CENTER SPRING HEIGHT INSIDE THE NON-WOVEN PSHF-DS-01 Ø1.6~ Ø2.2 Ø55~ Ø70 80~140 PSHF-DS-02 Ø1.6~ Ø2.2 Ø55~ Ø70 120~180 PSHF-DS-03 Ø1.6~ Ø2.2 Ø60~ Ø75 80~140 PSHF-DS-04 Ø1.6~ Ø2.2 Ø60~ Ø75 120~180 PSHF-DS-05 Ø1.6~ Ø2.2 Ø60~ Ø75 140~200 PSHF-DS-T2 Ø1.3~ Ø1.6 Ø45~ Ø55 70~120 PSHF-DS-T2 Ø1.3~ Ø1.6 Ø45~ Ø55 120~180 BOTTOM SEAL TYPE (UNIT: mm) WIRE DIAMETER SPRING DIAMETER IN THE CENTER SPRING HEIGHT INSIDE THE NON-WOVEN PSHF-BS-01 Ø1.6~ Ø2.2 Ø45~ Ø60 120~180 PSHF-BS-01 Ø1.6~ Ø2.2 Ø45~ Ø60 140~180 PSHF-BS-01 Ø1.6~ Ø2.2 Ø55~ Ø70 120~180 PSHF-BS-01 Ø1.6~ Ø2.2 Ø55~ Ø70 140~120 PSHF-BS-01 Ø1.6~ Ø2.2 Ø55~ Ø70 160~220 PSHF-BS-01 SPECIAL Learn More