Search results for: '600*25'

REFERENCE NUMBER: K-3889

LABORATORY TWO FOR ONE TWISTER

MACHINE: X-A5 TWO-FOR –ONE

NAME:LABORATORY TWISTER

MODEL: HFX-A5

BASIC FUNCTION:THROUGH TWO-FOR-ONE TWISTING SPINDLES, THE MACHINE IS USED TO TWIST SINGLE YARNS INTO STRINGS

TECHNIQUE DATA:

CONTROL MODE: TOUCH SCREEN+ PLC

SPINDLE NUMNER: 1

TWISTING DEGREE: ABOUT 50-2000 TIMES/METER

OUTPUT: ABOUT 0.25KG TO 1KG

OUTPUT SPEED: 80M/MIN

ROTATION SPEED OF SPINDLE: 8000RPM

DRUM SIZE: Φ82mm×170mm

BOBBIN SIZE: Φ42mm×170mm

TOTAL POWER: 360W  

VOLTAGE: 220/3×380V AC 50/60Hz

MACHINE DIMENSIONS: 800mm×600mm×1700mm

REFERENCE NUMBER: K-3891

LABORATORY ROTOR SPINNING MACHINE

MACHINE: X-03 LABORATORY ROTOR

NAME:SPINNING MACHINE

MODEL: X-03

BASIC FUNCTION:TO SPIN COTTON INTO OE YARN

TECHNIQUE DATA:

CONTROL: TOUCH SCREEN+PLC+INVERTER

SPINDLE NUMNER: 1

FIBER LENGTH: 22mm TO 42mm

OUTPUT: ABOUT 0.25KG TO 1 KG

ROTOR SPEED: 30000 RPM

OPENING ROLLER SPEED: 6000 RPM

TAKE-UP SPEED: 20-110M/MIN

DRAFTING RATIO: 30-250

TOTAL POWER: 640W 

VOLTAGE: 220/3×380V AC 50/60Hz

MACHINE DIMENSIONS: 800mm×600mm×1700mm

REFERENCE NUMBER: P-4324

PORTABLE WIPES, MODEL WL68

Model: WL68

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface: 8" LCD touch screen
Packing style: end seal & reciprocating  type
Frequency division detection: nonwoven, film, label detect respectively
Auto splicing: raw material & film automatic bonding, label automatic switching
Wipes stacking: manipulator
Inferior eliminate: color bonding connector rejected online
Flow control: 2.5-4 times, flow meter control
Moisture type: 4 fluid pipes  spray independently
SUS Agitate tank: 2 sets, 600L stainless steel agitate tank
Liquid level control: electronic detection, auto control

Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W800mm, φ1000mm
Axis QTY settings:2 rolls raw materials ,1 roll cut into 4 channels,1 roll stand by auto splicing
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Folding  type: Z fold
Wet wipes size:L90-105mm  W55-100mm
Open size: L175-205mm W140-200mm
Package size: L130-200mm W60-110mm H5-50mm
Production speed: 70 bags/min &1200 pieces/min
Machine space: L8100mm W4000mm H2100mm
Power: AC 380V 50/60Hz 20KW
Compressed air: 0.6-0.8Mpa 250L/min
Machine net weight : 7500kg

Option equipment: Coding machine Metal detector

QUANTITY: 1

REFERENCE NUMBER: P-4328

FLAT TYPE WET WIPES

Model: WL-F
Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface: 8" LCD touch screen
Packing style: Double end seal & rotary type
Frequency division detection: nonwoven ,film detect respectively
Automatic correction: material EPC& film EPC
Auto splicing: raw material & film automatic splicing
Moisture type: quantitative moisture
SUS Agitate tank: 600L stainless steel agitate tank
Liquid level control: electronic detect control automatically

Specifications
Raw material: spunlaced nonwoven, airlaid paper etc.
Raw material specification: max W250mm, φ1100mm
Axis QTY setting:2  rolls raw material, auto splicing without stopping
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP CPP PET/PE PET/AL etc. heat-seal material
Packing Film specification: max W280mm, φ350mm
Axis QTY setting:2 sets film, automatic splicing without stopping machine
Diameter of ventilating shaft: 3"
Folding type: V、W fold
Wet wipes size: L60-110mm W35-80mm
Open size: L120-220mm W120-250mm
Package size: L90-180mm W40-90mm
Production speed: 300-400bags/min, design 450 bags/min
Machine space: L5500mm W1250mm H1830mm
Power: AC 380V 50/60Hz 8KW
Compressed air: 0.6-0.8Mpa 100L/min
Machine net weight : 2000kg

Option equipment: Production counting machine Coding machine

QUANTITY: 1

REFERENCE NUMBER: P-4322

WET WIPES PRODUCTION LINE

MODEL: WL100
Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface:  LCD touch screen
Packing style: end seal & reciprocating type
Frequency division detection: nonwoven, film, label detect respectively
Auto splicing: raw material & film automatic splicing, label automatic switching
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 10 fluid pipes spray independently
SUS Agitate tank: 2 sets, 600L stainless steel agitate tank
Liquid level control: electronic detection, auto control
 
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W1050mm, φ1000mm
Axis QTY settings:4  raw materials,2 rolls cut into 10 channels, 2 rolls standby auto splicing
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic splicing without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding  type: single extraction & interfold type
Wet wipes size:L120-220mm  W90-110mm
Open size: L120-220mm W150-210mm
Package size: L150-300mm W80-120mm H10-80mm
Production speed: 50 bags/min &4000 pieces/min
Machine space: L15000mm W3500mm H2100mm
Power: AC 380V 50/60Hz 18KW
Compressed air: 0.6-0.8Mpa 250L/min
Machine net weight :12000kg

Option equipment: Coding machine Metal detector

QUANTITY: 1

REFERENCE NUMBER: P-4332

WET WIPES FOLDING MACHINE

MODEL RF

Machine  Characteristic:
Control system: PLC
Drive element: inverter control
Operate interface: LCD touch screen
Detection online: splicing  connector detect
Auto splicing: raw material automatic  splicing
Wipes counting: auto counting, set by LCD
Flow control: 2.5-4 times moisture
Moisture type: 2 liquid pipes spray
Cutting: stainless steel round knife
Protective alarm: breakdown alarm and stop

Specifications:
Raw material: spunlaced nonwoven, therbond etc. nonwoven
Raw material specification: max W250mm, Φ1100mm
Axis QTY settings: 2 rolls raw material, auto splicing
Diameter of ventilating shaft: 3"
Folding type: Z, W fold
Wet wipes size: L100mm  W50-100mm (special  specifications need be marked)
Open size: L200mm  W140-250mm
Production speed: 500-600 pieces/min, design 650 pieces/min
Machine space: L4900mm  W1200mm  H1500mm
Power: AC 380V  50/60Hz  4KW
Compressed air: 0.6-0.8Mpa   100L/min
Machine  net  weight: 2000kg

Option  equipment:  Stainless steel agitate tank Automatic  Knife  grinder

QUANTITY: 1

REFERENCE NUMBER: P-4323

WET WIPES PRODUCTION LINE

Model WL100

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface:  LCD touch screen
Packing style: end seal & reciprocating type
Frequency division detection: nonwoven, film, label detect respectively
Auto splicing: film automatic bonding, label automatic switching
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 12 fluid pipes spray independently
SUS Agitate tank: 2 sets, 600L stainless steel agitate tank
Liquid level control: electronic detection, auto control
 
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W350mm, φ1400mm
Axis QTY settings:12 rolls raw materials,12 electronic eyes detect online
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic bonding without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding  type: single extraction & interfold type
Wet wipes size:L120-220mm  W90-115mm
Open size: L120-220mm W150-330mm
Package size: L150-300mm W80-120mm H10-80mm
Design speed: 120bags/min &250cutting/min
Production speed: 50 bags/min &4000 pieces/min
Machine space: L16000mm W2500mm H2100mm
Power: AC 380V 50/60Hz 18KW
Compressed air: 0.6-0.8Mpa 250L/min
Machine net weight :10000kg

Option equipment: Coding machine Metal detector 

QUANTITY: 1

REFERENCE NUMBER: P-4330

ROLL TYPE WET WIPES

Model: WL-R
Machine Characteristic:
Control system: PLC
Drive element: inverter control
Operate interface: LCD touch screen
Packing style: end seal & rotary type
Detection online: raw material & film detect respectively
Moisture type: spray
SUS Agitate tank: 600L stainless steel agitate tank
Liquid level control: electronic detect control automatically

Specifications:
Raw material: spunlaced nonwoven, airlaid paper etc.
Raw material specification: max W300mm, φ1200mm
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP CPP PET/PE PET/AL etc. heat-seal material
Packing Film specification: max W280mm, φ350mm
Diameter of ventilating shaft: 3"
Rolling type: V fold
Production size:L75-180mm max  φ30mm
Open size: L150-300mm W150-300mm
Package size: L110-250mm W30-50mm
Production speed: up to packing material, design 200 bags/min
Machine space: L5000mm W3500mm H1900mm
Power: AC 380V 50/60Hz 4KW
Compressed air: 0.6-0.8Mpa 100L/min
Machine net weight : 2000kg

Option equipment: Production counting machine Coding machine

QUANTITY: 1

REFERENCE NUMBER: P-4331

PORTABLE WET WIPES MACHINE

Model: L62
Machine Characteristic
Control system: Multi-Axis Motion Controller & PLC
Drive element: servo motor
Operate interface:  LCD touch screen
Packing style: end seal & reciprocating  type
Detection online: splicing connector detect
Auto splicing: raw material automatic splicing 
Wipes counting: auto counting, set by LCD
Flow control: 2.5-4 times moisture
Moisture type: 2 liquid pipes spray
SUS Agitate tank: 600L stainless steel agitate tank
Liquid level control: electronic detect control automatically

Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W250mm, φ1100mm
Axis QTY settings:2 rolls raw materials , auto splicing
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label (paste safety label need be marked)
Label size: max W100mm φ400mm
Diameter of ventilating shaft: 3"
Folding  type: Z, W fold
Wet wipes size:L100mm  W50-100mm(special specifications need be marked)
Open size: L200mm W140-250mm
Package size: L130-200mm W55-110mm H5-50mm
Production speed: 70 bags/min &550 pieces/min
Machine space: L4900mm W4700mm H2200mm
Power: AC 380V 50/60Hz 12KW
Compressed air: 0.6-0.8Mpa 300L/min
Machine net weight : about  3000kg

Option equipment: Coding machine Automatic Knife grinder

QUANTITY: 1

S-1173 PP FILM EXTRUDER, WIDTH 2000 TO 2200mm

PP FILM EXTRUDER
LONGER LIFE OF SCREW & BARREL
AC INVERTOR & MOTOR WHICH SYNCHRONIZES THE ENTIRE EXTRUDER
PP & LD CAN BE PROCESSED DUE TO ITS SPECIAL SCREW DESIGN
LATEST TECHNOLOGY USED TO FORCE THE MELT INTO THE DIE VERY EFFECTIVELY
TAKE UP SMALL AREA
SIMPLE OPERATION
HIGH OUTPUT CAPACITY
LOW MAINTENANCE
ITEM 001
MODEL: YSJ-70
T-DIE WIDTH: 600mm
DIA OF SCREW: 70mm
RATIO OF L/D: 30
ROTATION SPEED OF SCREW: 20 TO 90 R/MIN
DRAWING RATIO: 10-Apr
POWER CONSUMPTION: 100 KW/60 KW
MAX OUTPUT CAPACITY: 1200 KG/24H
MACHINE DIMENSION (L*W*H): 25000 X 2000 X 2000mm

QUANTITY: 1

ITEM 002
MODEL: YSJ-80
T-DIE WIDTH: 800mm
DIA OF SCREW: 80mm
RATIO OF L/D: 33
ROTATION SPEED OF SCREW: 20 TO 90 R/MIN
DRAWING RATIO: 10-Apr
POWER CONSUMPTION: 130 KW/80 KW
MAX OUTPUT CAPACITY: 2100 KG/24H
MACHINE DIMENSION (L*W*H): 26000 X 2200 X 2100mm

QUANTITY: 1

ITEM 003
MODEL: YSJ-90
T-DIE WIDTH: 1000mm
DIA OF SCREW: 90mm
RATIO OF L/D: 33
ROTATION SPEED OF SCREW: 20 TO 90 R/MIN
DRAWING RATIO: 10-Apr
POWER CONSUMPTION: 150 KW/100 KW
MAX OUTPUT CAPACITY: 3000 KG/24H
MACHINE DIMENSION (L*W*H): 27000 X 2200 X 2000mm

QUANTITY: 1