Search results for: 'Open+and'

TT-4374 BACK PRESSURE TURBINE – NEW, 8 MW, 60 Hz STEAM TURBINE GENERATOR 8.0 MW NEW NEVER USED SURPLUS SHIN-NIPPON - ABB ALTERNATOR 8.0 MW - 60 Hz, 13.8 KV, SPEED - 7800 / 1800 RPM INLET PRESSURE - 32 BAR A = 465 PSIG TEMPERATURE - 342 DEG. C. = 647.6 DEF. F. EXHAUST STEAM PRESSURE - 0.12 BAR. A = 1.74 PSIG EXTRACTION STEAM PRESS. - 8 BAR. A = 116.03 PSID WITH ABB - 8.0 MW - BACK-END ALTERNATOR, 1800 RPM, 60 Hz, 13.8 KV Learn More

TT-3529 RIETER COTTON COMBED SPINNING PLANT WITH 26,112 SPINDLES, YEAR 2008 TO 2016 Learn More

TT-1984 APPLE JUICE FACILITY, 90,000 LBS/HR IN, 15,500 LBS/HR OUT ITEM 001 4-EFFECT EVAPORATOR / CONCENTRATOR, MANUFACTURED BY APV, PREVIOUSLY RUNNING DEPECTINIZED FRUIT JUICE AT RATE OF 170 GPM-IN AT 3-4 BIX, 20 GPM-OUT AT 70 BRIX (90,000 LBS/HR IN, 15,500 LBS/HR OUT). STEAM CONSUMPTION OF 16,000 POUNDS PER HOUR AT 125 PSI. TOWER WATER RUNNING 1,650 GPM AT 50 DEG F. INCLUDES MATCHED CAPACITY UHT PASTEURIZING SYSTEM. EFFECTS CONSIST OF 1A/1B, 2, 3A/3B, 4A, 4B. COMPLETE SYSTEM WITH PLATE HEAT EXCHANGERS, TANKS, PUMPS, AND CONTROLS. ITEM 002 CROSSFLOW MICROFILTRATION SYSTEM, MANUFACTURED BY TECHSEP, WITH CARBOSEP CARBON MEMBRANES. HIGH SIDE AND LOW SIDE EACH RATED FOR 40 GPM FOR A TOTAL OF 80 GPM. CARBOSEP MEMBRANES FEATURE SINTERED CARBON MEMBRANE SUPPORT, METALLIC OXIDE MEMBRANE LAYER, MEASURES 1200MM/47.25 LONG X 10 MM/0.4” OD, 6 MM/0.23” ID, RATED FOR 40 BAR/580 PSI BURSTING PRESSURE, 15 BAR/217 PSI SERVICE PRESSURE, 0 TO 14 SERVICE PH, MICROFILTRATION AT 0.14 MICRONS. STAINLESS STEEL FILTRATION HOUSING MEASURES 9” DIAMETER X 4’ LONG. (3) SKIDS, EACH DRIVEN BY 60 HP GOULDS XLT-X CENTRIFUGAL PUMP. INCLUDES (2) STAINLESS STEEL CARTS OF EXTRA PARTS AND THOUSANDS OF UNUSED SPARE FILTRATION TUBE MEMBRANES STILL IN BOXES. ITEM 003 (2) 10,000 GALLON STAINLESS STEEL TANKS, MEASURES 8’ DIAMETER X 15’ HIGH, SINGLE WALL CONSTRUCTION, INCLUDES 5 HP SIDE AGITATOR MANUFACTURED BY MIXMOR, DRIVEN BY 5 HP MOTOR. FEATURES 4” CENTER BOTTOM DISCHARGE, MANWAY OPENING, AND 7.5 HP TRANSFER PUMP. ITEM 004 GRANULAR DECOLORING CARBON FILTRATION SYSTEM, LAST USED TO PROCESS FRUIT JUICE AT RATE OF 150 GPM. CONSISTS OF (2) FILTRATION COLUMNS, EACH MEASURING 3’ DIAMETER X 16’ HIGH STRAIGHT SIDE, APPROXIMATELY 850 GALLONS WITH DISH TOP AND BOTTOM; 4,000 GALLON STAINLESS STEEL SINGLE WALL “CAUSTIC” TANK WHICH MEASURES 8’ DIAMETER X 10’ HIGH STRAIGHT SIDE, 2,000 GALLON STAINLESS STEEL TANK MEASURING 6’ DIAMETER X 10’ HIGH WITH DISH BOTTOM AND 3” OUTLET; SECONDARY FILTER SKID WITH (2) COLUMNS, EACH MEASURING 8” DIAMETER X 3’ HIGH; 200 GALLON STAINLESS STEEL CIP TANK MEASURING 40” DIAMETER X 32” HIGH WITH DISH TOP; AND 10 HP FRISTAM PUMP. ITEM 005 ALFA LAVAL / DE LAVAL AUTOMATIC DESLUDGING DISC CENTRIFUGE, MODEL BRPX 417 SEV 31CCL – 60/88 – 1008 – 13, MANUFACTURING NUMBER 2982935, RATED FOR MAX SPEED OF 3980 R/M. DRIVEN BY 50 HP, INCLUDES 10 HP TRANSFER PUMP, ALLEN BRADLEY DIGITAL CONTROLS. ITEM 006 WESTFALIA AUTOMATIC DESLUDING DISC CENTRIFUGE, MODEL SB80-06-177, SERIAL # 1668 988, MANUFACTURED IN 1980, RATED FOR MAX BOWL RPM OF 4430, 1.1 KG/DM3 OF HEAVY LIQUID, 1.3 KG/DM3 OF SLOIDS. DRIVEN BY 75 HP TOSHIBA MOTOR, INCLUDES CONTROL PANEL WITH ALLEN BRADLEY TOUCHSCREEN CONTROLS. Learn More

TT-1524 TUFTING ROBOT, YEAR 2019, MAXIMUM CARPET SIZE 4 METERS x 3 METERS INCLUDING 2 SOFTWARE LICENSES AND ARTIFICIAL GRASS YARN FULL WORKING CONDITION YEAR: 2019 MADE BY GERMAN COMPANY EFAB STATUS: CURRENTLY RUNNING Learn More

YY-2089 FIBER MIXING SYSTEM – THREE HOPPERS TECHNICAL DATA OF BALE OPENERS POWER: 3.55KW WEIGHT: 2600 KG QUANTITY: 1 Learn More

TT-1009 COMPLETE MALIWATT STITCH-BONDING PRODUCTION LINE, WORKING WIDTH 2800mm MALIWATT STITCH BONDING LINE BRAND: MALIWATT BONINO ALL ELECTRIC MOTORS ALL ELECTRIC CONTROL PANELS WITH INVERTERS RECENT ELECTRIC CONTROL PANEL OF THE CARDING MACHINE, WITH INVERTERS OF INLET UNITS, MAIN SWIFTS AND DOFFERS, BLACK-OUT FAIL-SAFE SYSTEM PROCESSED FIBERS: FROM 1.5 TO 15 DTEX PRODUCT WEIGHTS: FROM 70 TO 350/400 GSM QUANTITY: 1 SET Learn More

YY-2051 NEW CASHMERE AND SHEEP WOOL CARDING MACHINE, PRODUCTION EFFICIENCY 98% DETAILS: CONDITION: NEW APPLICABLE INDUSTRIES: MANUFACTURING PLANT, FARMS CORE COMPONENTS: BEARING APPLICATION: WOOL, CASHMERE AUTOMATIC GRADE: AUTOMATIC PRODUCTION EFFICIENCY: 98% VOLTAGE: 220 VOLTS, 3-PHASE OR AS PER CUSTOMER REQUIREMENT DIMENSIONS (L X W X H): 3000 X 2400 X 1800(mm) WEIGHT: 5800 KG QUANTITY: 1 Learn More

J-3493 ULTRASONIC EMBOSSING MACHINE, WORKING WIDTH 2400mm - NEW REQUIRES 5 OPERATORS AIR PRESSURE: 0.8 Mpa, 0.3 CUBIC METERS PER MINUTE DIMENSIONS: 5800 x 3050 x 2000mm L x W x H VOLTAGE: 380 VOLTS, 3-PHASE, 50 Hz TOTAL POWER: 18 KW WEIGHT: ABOUT 3500 KG QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6848 SPINNBAU CARDING LINE, YEAR 2013 BRAND: SPINNBAU SHORT DESCRIPTION: CARDING LINE YEAR: 2013 INSTALLED 2014 LIKE NEW, LITTLE RUN TIME 4 HOPPER TEMAFA BLEND LINE, 1600mm WIDE, 1 WITH CONDENSER FED FROM TRIM MACHINE CARDING WILLOW – 800mm WIDE FEED BELT AND 1200mm WIDE – TEMAFA TEMAFA MIXMASTER BLENDING BIN – 3000mm WIDE X 8000mm LONG X 4600mm HIGH (FILL HEIGHT 3000mm). 72 CUBIC METER CAPACITY. TEMAFA FINE OPENER – 2000mm WIDE WITH PINS 3000mm SPINNBAU CARD FEEDING UNIT – FEED TRUNK, VIBRATING CHUTE, WEIGHT BELT 708mm BREAST SECTION WITH 3 WORKERS AND STRIPPERS, 1500mm MAIN WITH 5 W/S AND (2) 708mm DOFFERS. 1 FOUNDATIONS AND PLATFORMS. DILO PROFILINE – BATT WEIGHT CONTROL SYSTEM MAHLO WEIGHT MEASURING UNIT – QUALISCAN CMS-12 DILO LAYER CROSSLAPPER – TYPE DLS 30/60 – 3000mm INFEED AND UP TO 6000mm LAYDOWN. MAX WEB HEIGHT 650mm. MAXIMUM SPEED 125M/MIN. SPINNBAU LAP DRAFTER TYPE VST 19 – MAX 6000mm WORKING WIDTH. 9 ROLLER PAIRS. LIFTING DEVICE TO ALLOW FOR 600mm CLEARANCE. 159mm ROLLER DIAMETER. INFEED HEIGHT 650 mm BRUCKNER THERMOBONDING OVEN – 5000mm OVEN WITH 3 HEATING AND 2 COOLING ZONE. MAGNETIC BELT. 3 NATURAL GAS MAXON BURNER. SLITTING – 9 POSITION BRUCKNER CRUSH CUTTER SLITTING HEADS. PNEUMATIC LIFTING. 450mm KNIFE DIAMETER CROSS CUTTER – ROTARY CUTTER STYLE WITH CLAMPING. CAPABLE OF 3 CUTS/MINUTES FOR MATERIALS UP TO 200mm THICK. WINDING – ASCENDING BATCH STYLE WINDER. MAX ROLL DIAMETER OF 1200mm. 3000mm DRIVEN FEED CONVEYOR. MANDREL GUIDANCE SYSTEM, MANUALLY ADJUSTABLE BRAKE SYSTEM FOR CONTROLLING TENSILE FORCE AND COMPACTION. TEMAFA FILTER HOUSE – TFS 50. MAX FLOW 50,000 CUBIC METER/H ELECTRICL INFO – 3 X 480V/60Hz. CONTROLS 110V AC/24 DC. SIEMENS PLC QUANTITY: 1 Learn More

See all pictures: https://ibb.co/album/gpK9bF

#1 GRIBETZ MPLUS PATTERN LINK 90 TACK AND JUMP 3 BAR WITH PANEL CUTTER 4 POS CREEL

#2 GRIBETZ GI4300 TACK AND JUMP 90" 3 BAR WITH PANEL CUTTER 3 POS CREEL

# 3 EMCO 2 BAR 1X3 WITH PANEL CUTTER, YEAR 2001 (FOR PARTS)

#4 EMCO COMPUSTITCH 3 BAR
WITH JAMES CASH K-10 PANEL CUTTER

#5 GRIBETZ GI2300 90" SET UP FOR BORDERS 4 POS CREEL

#6 EMCO 9000 COMPUSTITCH 1X3X6 BUT RUNNING 1X6
WITH BORDER CUTTER JAMES CASH K-10 1997

#7 EMCO 9000 COMPUSTITCH 3 BAR 1 POSITION CREEL
WITH BORDER CUTTER JAMES CASH K-10

#8 GRIBETZ 3 BAR 92"
WITH JAMES CASH K-12

#9 TAPE EDGE WITH SINGER 300UX6 STEEL TABLE 55 X 81

#10 ATLANTA ATTACHEMENT TAPE EDGE WITH SINGER 300UX5 WITH STAINLESS STEEL TABLE 60 X 80

#11 ATLANTA ATTACHEMENT TAPE EDGE WITH SINGER 300UX5 WITH STAINLESS STEEL TABLE 60 X 80

#12 ATLANTA ATTACHEMENT TAPE EDGE WITH PFAFF 5625 WITH STAINLESS STEEL TABLE 60 X 80

#13 ATLANTA ATTACHEMENT TAPE EDGE WITH SINGER 300UX6 WITH STAINLESS STEEL TABLE 60 X 80

#14 PORTER TAPE EDGE PFAFF DISSASSEMBLED HEAD TABLE SIZE 60 X 82

#15 ATLANTA ATTACHMENT TAPE EDGE WITH PFAFF 5625 STAINLESS STEEL TABLE 59 X 79

#16 ATLANTA ATTACHEMENT TAPE EDGE WITH SINGERS 300UX5 STAINLESS STEEL TABLE 60 X 80 16"H

#17 BUILD UP TABLES MOSTLY 60 X 80 OF WHICH 15 ARE GLOBAL SYSTEMS AND 2 ARE HOME MADE

#19 ? SMALL BALER CONSOLIDATED MODEL STDS-2 36' WIDE X 18" FRONT TO BACK X 50"H

#20 SCREW UNBALER ATLANTA ATTACHMENT FOR 18 INNERSPRING CAPACITY

#21 PIQUA BALER 58 X 31 X 54" TALL 220 VOLT

#22 SCREW UNBALER WBSCO

#23 CART FOR INNERSPRING BALE

#24 GRIBETZ PANEL CUTTER ( I HAVE ALL THE INFO ALREADY)

#25 LAMINATOR GRIBETZ STRATA WITH HOT ROLL AND FELT BLANDET FOR LAMINATING WITH WEB SUBSTRATE (ROTARY HEAT PRESS) MODEL GLM011 220 VOLT , 2 POS CREEL

#26 HORIZONTAL FOAM CUTTER ESCO MODEL HTX 51-88 PU+
88" WIDE , X 118" LONG , KNIFE GRINDERS , SUCTION TABLE
TOUCH SCREEN PANEL , ELECTRICAL CONTROL PANEL
AUTOMATIC LUBRICATION BINKS MODEL 80-600 SG2 PLUS

#27 VERTICAL FOAM CUTTER MODEL EL-4
112" WIDE
OUTSIDE TABLE 73"
INSIDE TABLE 74"
FENCE 8" PLUS 16 " EXTENSION
68" THROAT
112" OVERALL HEIGHT
194" TOTAL RAIL WIDTH

#28 PORTER SERGER FLANGER MODEL 4000 WITH AIR FLOTATION TABLE
220 VOLT

#29 ATLANTA ATTACHMENT JUKI SERGER FLANGER MODEL MO6916G BELT DRIVE WITH AIR FLOTATION TABLE

#30 ATLANTA ATTACHEMENT JUKI SERGER FLANGER MODEL MO6916G BELT DRIVE WITH AIR FLOTATION TABLE

#31 SINGER LONG ARM REPAIR 25"

#32 ATLANTA ATTACHEMENT RUFFLER
MODEL 13XXMF

#33 ATLANTA ATTATCHMENT 9 NEEDLE SEWING MACHINE (MULTINEEDLE) MODEL 4000D

#34 SINGLE NEEDLE SIT DOWN MACHINES OF WHICH 3 ARE PORTER

#35 AVANCE EMBROIDERY MACHINE

#36 GALKIN "X" SEWING MACHINE FOR HANDLES
GAP5OBT-3 , JUKI MODEL LK1900CV

#37 ATLANTA ATTACHMENT DOUBLE BORDER SERGER 25" OPENING , PEGASUS HEAD
MODEL E521-130 AND EX5203-M03

#38 ATLANTA ATTACHMENT BINDER FOR HANDLE MAKING

#39 ANDERSON MULTISLITTER 10 BLADES 92" WIDE

#40 ANDERSON STAND ALONE PANEL CUTTER 103"WIDE WITH 2 EDGE SLITTERS AND ONE CROSS CUTTER
WITH 1049 HOURS ON THE CLOCK

#41 CONVEYOR FOR SEW DEPARTMENTE 34" WIDE OVER 100 FEET LONG

#42 TOYOTA FORKLIFTS 6270 LBS CAPACITY MODEL 71CCUT5 (TWO)
ONE NISSAN FORKLIFT
ONE CATERPILLAR FORKLIFT

#43 ONE GLUE STATION 4 GUNS , SABA GUNS , NOT THERE (BELONG TO SABA)

#44 240 FEET LONG CONVEYOR FEEDING MATTRESS WRAPPING DEPARTMENT

#45 TWO MERELLO WRAPPERS 20 INCH MAX HEIGHT X 88 " WIDE, YEAR 2016

#46 TECNOMAC (ITALY) MATTRESS ROLL AND PACK MACHINE MODEL TK381 YEAR 2015
400 VOLT X 50HZ X 30 KW
8 BAR AIR PRESSURE

Learn More