Search results for: 'machine+de+fabri'

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

Learn More

M-6247 OSTHOFF SP-80 SINGEING MACHINE YEAR 1980

SINGEING MACHINE
MAKE: OSTHOFF
MODEL: SP 80
YEAR: 1980
WORKING WIDTH: 1800mm TO 2000mm
(BURNER WIDTH 2400mm, ROLLER WIDTH INSIDE SINGEING BOX 2300mm)
ROLLER AND CYLINDER WIDTH AFTER SINGEING BOX 2100mm
FABRIC ENTRY WITH GUIDE ROLLERS AND TENSIONING DEVICE
OSTHOFF SINGEING MACHINE WITH 2 x DOUBLE JET BURNERS FOR FACE AND BACK SINGEING
DUST SUCTION FAN WITH EXHAUST
DESIZING TANK WITH 4 BOTTOM AND 4 TOP SS ROLLERS
1 x SS PREPARATION VESSEL
EXIT WITH PLAITER
3 TROLLEYS FOR THE FABRIC INCLUDED IN LINE
380V, 50HZ
UPGRADED ELECTRIC CONTROL BOX AND PB GAS DELIVERY UNITS

CONDITION: GOOD

QUANTITY: 1

Learn More

M-1947 OSTHOFF SINGEING MACHINE MODEL VP99 (6413) YEAR 2005 WIDTH 2100mm

OSTHOFF SINGEING MACHINE
MODEL VP99 (6413)
YEAR 2005
WIDTH 2100mm
NATURAL GAS HEATING
GAS PRESSURE 0,3 – 3 BAR
GAS CONSUMPTION 20 М³/HOUR
COLD WATER CONSUMPTION 2,2
M³/HOUR ± 10%
INSTALLED POWER 23 KW
FABRIC INTRODUCTION
SYSTEM WITH ACCUMULATOR FOR ROLLS CHANGING WITHOUT INTERRUPTION OF WORKING
CLEANING SYSTEM WITH DUST DETECTOR
DOUBLE RAMP
DOUBLE BRUSHING GROUP
2- BENNINGER EXTRACTA CLOSED WASHING DEVICE FOR FABRIC IMPREGNATION WITH A SOLUTION FOR THE NEXT DESIZING
EXIT ON THE ROLL
AUTOMATIC SYSTEM FOR PROCESS COMMAND
SPEED: 10 TO 100 M/MIN

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-4076

COMPLETE BLANKET MANUFACTURING PLANT, YEAR 1994 TO 2002

 

DYEING
OFFER 001

PRESS AIPA-CIMA

TYPE: PM / 2 (7 KW)

YEAR: 1994
QUANTITY: 1

 

OFFER 002

AUTOCLAVE AIPA

MODEL: HT 200 / D

YEAR: 1994

CAPACITY: 5700 LIT

4.5 BAR
QUANTITY: 1

 

OFFER 003

CENTRIFUGE CIMA IMPIANTI

YEAR: 1994

185 KW
QUANTITY: 1

 

OFFER 004

CRANE OMIS

WITH WINCH AND BASKET

YEAR: 1994

QUANTITY: 1

OFFER 005

DRYER SN. LUCIA LTD

2 DRUMS

HEIGHT: 1600mm

YEAR: 1994

QUANTITY: 1

OFFER 006

PRESS

TRANSPORT EQUIPMENT FOR WET FIBERS

FORKLIFTS

COMPRESSORS

ETC.

SPINNING

OFFER 007
FIBER MIXING PLANT

MODEL: 3652 AND 3660

MANUFACTURER: MECHANICAL CARESI LTD. AND T. BRACCIOLINI

YEAR: 1994
QUANTITY: 2

 

OFFER 008

BONINO CARDING MACHINE

MODEL: CA 83

YEAR: 1994

DELIVERY IN CANS
QUANTITY: 1

 

OFFER 009

RIETER DRAWING MACHINE SB2

YEAR: 1994

QUANTITY: 1

OFFER 010

RIETER OPEN END

MODEL: RL10

YEAR: 1994

QUANTITY: 1

OFFER 011

100 BARRELS FIBERS

COMPRESSOR

PALETTE FOR YARNS

TROLLEYS

ETC.

WEAVING

OFFER 012
HACOBA WARPER

MODEL: US-B

YEAR: 1994

WIDTH: 3000mm

SPEED: 20 TO 600 M/MIN
WITH CREEL 490 COILS

QUANTITY: 1

 

OFFER 013

SOMET THEMA SUPER-EXCEL

WIDTH: 3000mm

YEAR: 2001

WITH JACQUARD GROSSE

MODEL: EJP2

QUANTITY: 1

 

OFFER 014

SOMET THEMA EXCEL

WIDTH: 2200mm

YEAR: 2002
JACQUARD GROSS

MODEL: EJP 2
QUANTITY: 2

 

OFFER 015

SOMET THEMA 11E

WIDTH: 2200mm

YEAR: 1994
GROSSE JACQUARD

MODEL: EJP
QUANTITY: 9

 

OFFER 016

WITH 24 BEAMS

VARIOUS TROLLEYS

ETC.

FINISHING

OFFER 017
MARIO CROSTA SRL WOOLLY 2

MODEL: MC 10/30

YEAR: 1994
QUANTITY: 1

 

OFFER 018

WOOLLY MULLER GMBH

TRI 224

PR- 1

YEAR: 1994

WIDTH: 2200mm
QUANTITY: 2

 

OFFER 019

MULLER MOWERS

YEAR: 1994
QUANTITY: 3

 

OFFER 020

REAM OF STEAMING (SCREED) TO SANTA LUCIA

BRAND: FABRICS

YEAR: 1994

QUANTITY: 1

OFFER 021

COMPRESSOR

BOILER FOR STEAM VAPORAX 1000

ETC.

MAKING

OFFER 022
HEMING LINE FROM MAGETRON S, R, L

YEAR: 1995
QUANTITY: 1

 

OFFER 023

SEWING MACHINES

OF DIFFERENT TYPES AND MODELS

ETC.

OFFER 024
BOILER

WATER TREATMENT

OTHER PERIPHERICAL EQUIPEMENT

 

QUANTITY: 1 PLANT

Learn More

REFERENCE NUMBER: K-8582 (99065QYS8RC) MONFORTS TOPTEX AND SHRINKING MACHINE YEAR 1994 WIDTH 1900mm MONFORTS TOPTEX + W SHRINKING MACHINE YEAR: 1994 WORKING WIDTH: 1900mm INSPECTION TABLE EDGE CONTROL SPEED REGULATION CENTERING AND OPENING DEVICE AT ENTRY WAS WORKING MAINLY ON KNITTED BUT ALSO ON WOVEN FABRICS DISMANTLED QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1861 (1313235MKD12RX) SANTEX PRE-TREATMENT AND WASHING MACHINE TYPE ACTIWASH YEAR 2002 DESIGNED FOR LOW-TENSION PRE-TREATMENT OF WOVEN AND KNITTED GOODS MANUFACTURER: SANTEX - SWITZERLAND YEAR OF MANUFACTURE: 2002 WORKING WIDTH: 2200/1800 mm SPEED OF MACHINE: 3-100 M/MIN PRODUCTION SPEED: APPROX. 75 M/MIN THE DAILY OUTPUT WILL DEPEND E.G. ON QUALITY AND WEIGHT OF FABRICS/KNIT GOODS YOU WILL WASH ON THESE MACHINES. SO FAR THE PLANT WAS RUNNING AT AN AVERAGE SPEED OF 40 M/MIN, I.E. 2,400 MTRS PER WORKING HOUR. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1861 (770235KOL6RX) SANTEX PRE-TREATMENT AND WASHING MACHINE TYPE ACTIWASH YEAR 2002 DESIGNED FOR LOW-TENSION PRE-TREATMENT OF WOVEN AND KNITTED GOODS MANUFACTURER: SANTEX - SWITZERLAND YEAR OF MANUFACTURE: 2002 WORKING WIDTH: 2200/1800 mm SPEED OF MACHINE: 3-100 M/MIN PRODUCTION SPEED: APPROX. 75 M/MIN THE DAILY OUTPUT WILL DEPEND E.G. ON QUALITY AND WEIGHT OF FABRICS/KNIT GOODS YOU WILL WASH ON THESE MACHINES. SO FAR THE PLANT WAS RUNNING AT AN AVERAGE SPEED OF 40 M/MIN, I.E. 2,400 MTRS PER WORKING HOUR. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5236 (1313DYFAXX12) L SAMIL SIDC-6200 HP/HT JET DYEING MACHINE YEAR 2000 CAPACITY 500KG USED HP / HT JET DYEING MACHINE MAKER: SAMIL INDUSTRIAL CO., LTD., KOREA MODEL: SIDC-6200 YEAR: 2000 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1206 (1212GHBXX11) A MAGEBA FINISHING MACHINE FOR TAPE, YEAR 1995 MAGEBA FINISHING MACHINE FOR TAPE (NARROW WOVEN FABRICS) YEAR 1995 1 CYLINDER DIAMETER 800MM X WIDTH 1250MM STEAM HEATING PADDER CYLINDERWIDTH 200MM USED CURRENTLY FOR STRETCH TAPE CAN RUN RIGID TAPE NUMBER OF BANDS IS DEPENDENT ON WIDTH OF BAND CYLINDER WIDTH: 1250 MM QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1189 (1212GHBXX11) A THIES, TYPE TRD SOFT TRD 140/3, YEAR 2002 THIES TYPE: TRD, SOFT TRD 140/3 YEAR: 2002 MAX WORKING PRESSURE: 0.35 MPA MAX TEST PRESSURE: 0.455 MPA TEMPERATURE: 140°C WATER VOLUME OF 1 TUBE: 1100 LITERS (WHOLE MACHINE 3300 LITERS) AT THE MOMENT : CA 120-140 KG FABRICS IN 1 TUBE BY 100-300 G/SQM IT IS POSSIBLE WORK WITH 2 OR 3 TUBES MACHINE WORKS INSPECTION POSSIBLE ANY TIME QUANTITY: 1 EMAIL US FOR PRICE & PICTURES INCLUDE OUR REFERENCE NUMBER Learn More