Search results for: 'automatic V'''

REFERENCE NUMBER: A-1169 (1212GHBXX11) A SAVIO ESPERO WINDER RL YEAR 1997 60 HEADS ELECTRONIC CLEARERS USTER QUANTUM – C15 F23 WITH FOREIGN FIBERS DETECTORS YEAR 1997 DX MAIN UNIT 60 HEADS FEEDING BY CONE WITH AUTOMATIC CONE CHANGE PITCH 6” (152mm) CONICITY 5° 57’ DRUM 2 TURNS VARIABLE STEP 2 SECTION YARN STRETCHER + WAXING DEVICE SPLICER MESDAN MOD.490 L 2 TROLLEY AUTOMATIC DOFFING 2 AUTOMATIC MAGAZINE CONE RESERVE CONES CONVEYOR BELT ALFA-PANEL – NEW MODEL ELECTRONIC CLEARERS USTER QUANTUM – C15 F23 WITH FOREIGN FIBERS MAGITEX LIGHTENING QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1111 (111DHJK10) A AUTOMATIC WINDER SAVIO MODEL ORION E YEAR 2005 – 44 POSITIONS Year 2005 44 Positions Left Head Stock Cops Automatic Loader Conicity 4°20’ (for knitting, wool and mix) Cylinder 2 steps, traverse 152mm diameter, 94 variable step Tube 260mm diameter, 46mm diameter Waxer Knotter Mesdan 690U Clearing plant Lopefe FC type (foreign fibers) Single trolley for doffing Cones automatic loader Lighting along the machine Magitex travelling blower with discharge in head stock 380V 50Hz QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3009

ATLANTA ATT 3300R AUTOMATIC BORDER MEASURE,  SEW AND HANDLE ATTACHING MACHINE WITH LABEL GOVERNMENT LABEL ATTACHING

 

BAND AND HEALTH MACHINE

8 POSITIONS TO PUT THE SPOOLS WITH THE HANDLE MATERIALS.

AUTOMATIC HANDLE TACKER, BORDER MEASURE, INSERT LAW LABEL AND CLOSE WORKSTATION

BRAND: ATLANTA ATTACHMENT

MODEL: 3300R

IT CAN PUT MATERIAL STYLE HANDLERS ON AUTOMATICALLY

THE FOLLOWING HEADS ARE ON THIS UNIT: MITSUBISHI PLKE 1010, LS2-1380 AND 1959Y28B

THIS MACHINE IS MADE OF (3) SEWING HEADS

(A) MITSUBISHI PLKE 1010

(B) LS2-1380

(C) 1959Y28B

THE FIRST TWO MACHINES MODEL: 3300R

THE LAST MACHINE’S MODEL: 1959Y28B

 

THE MACHINE HAS AT THE BEGINNING A SHAFT WITH 8 PLASTIC ROLLERS THAT ALLOW THE PULLING OF THE BORDER FORWARD

 

MEASURES BORDER, SETS HANDLE (4 OR 8), MEASURE, CUTS AND CLOSES BORDER

ACCOMODATES 8 ROLLS OF HANDLE FOR QUICK CHANGEOVER

AUTOMATICALLY DETECTS AND CUTS OUT SPLICES AND DEFECTS

LOCKSTITCH SEWING HEAD FOR CLOSING BORDER WITH NEEDLE POSITIONER, AUTOMATIC THREAD TRIMMER & PRESSER FOOTLIFT

FEEDS PRE-MADE HANDLES FROM ROLL

CAPACITY UP TO 15" BORDERS

STORES UP TO 22 STYLES

PROGRAMMABLE BOX "X" TACKER

SERIAL BUS CONTROL SYSTEM WITH TOUCH SCREEN UNCONDITIONALLY GUARANTEED THREE YEARS

SELF-DISGNOSTIC SOFTWARE

HEAVY-DUTY GUILLOTINE CUTTER WITH TEMPERED BLADES

HEAVY-DUTY FEEDING MODULE WITH URETHANE ROLLER

 

MAX SEWING SPEED (RPM):       CLOSER-5000                      TACKER-2300

FACTORY PRESET SPEED (RPM):                 CLOSER-1800                      TACKER-1500

MAX STITCH LENGTH (SPI):          CLOSER-6                            TACKER-8

NEEDLE SYSTEM:                              CLOSER-SNDLX1140        TACKER-SN135X1722

NEEDLE SIZE:                                      CLOSER-22 to 140             TACKER-22 to 140

WEIGHT OF MATERIAL:                 CLOSER & TACKER-MEDIUM

VOLTAGE (V/PH/HZ):                     CLOSER & TACKER- 22V 1PH 60HZ

CURRENT (AMPS):                           CLOSER & TACKER- 5

MOTOR TYPE:                                    CLOSER & TACKER- EFKA DC

AIR PRESSURE (PSI):                       CLOSER & TACKER- 80

AIR CONSUMPTION (CFM):         CLOSER & TACKER- 6

SHIPPING WEIGHT (LBS):              CLOSER & TACKER- 2250

SHIPPING DIMENSIONS:                               CLOSER & TACKER- 65 x 110 x 88

 

DESCRIPTION FROM WEB PAGE MAY NOT FIT MACHINE DESCRIPTION EXACTLY

 

QUANTITY: 1

Learn More

WEAVING MACHINES BENNINGER BEN DIRECT WARPER YEAR 2006 BEAM DIAMETER 1000mm, WIDTH 2200mm V-CREEL – 1024 ENDS, AUTOMATIC CUTTING AT CREEL CHANGE ELECTRICAL STOP MOTION, MECHANICAL TENSIONER MICROPROCESSOR CONTROL SUCKER MOENUS SIZING MACHINE YEAR 2006 SIZING MACHINE SUCKER MOENUS Z 14, WIDTH 3400mm 1000mm FLANG DIAMETER, 14 DRYING CYLINDERS 2 SOW BOXES, 2 DIP AND 2 NIP, 24 WARP BEAMS CREEL, FULLY AUTOMATIC PLC CONTROL SIZE MIXING COOLER, 1200 LITERS SIZE STORAGE VESSEL, 1200 LITERS STAUBLI DELTA AUTO DRAWING IN MACHINE YEAR 2006 AUTO DRAWING IN MACHINE, STAUBLI DELTA 110 3400mm, YARN MODULE (HM5), HEALD MODULE (HM2) REED MODULE (HM6), DROP WIRE MODULE (HM3) AND CONTROL MODULE JAYTEX WARP TYING MACHINE YEAR 2005 WARP TYEING MACHINE JAYTEX TROLLEY WITH TRANSFORMER WITH 2 NOS. TYING FRAMES SETIA KIJJI REED CLEANING MACHINE YEAR 2006 SETIA KIJJI – ULTRA SONIC CLEANING MACHINE REED CLEANER CONSISTS OF RINSING UNIT ULTRASONIC UNIT DRYING UNIT, SEMI AUTOMATIC PROCESS USING PLC. (18 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 EACH – 16 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI ELECTRONIC DOBBY 16 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (48 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 – 10 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 10 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (24 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 2E+06 – 6 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 6 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (2 UNITS) GREY INSPECTION MACHINE YEAR 2006 INSPECTION TABLE IS LAMINATED, PUSH BUTTON CONTROLS ARE GIVEN ON THE DRIVE BOX ON THE RIGHT HAND SIDE, CLOTH CAN RUN IN FORWARD AS WELL AS IN REVERSE DIRECTION FABRIC RUNS FACE IN/FACE OUT SPECIAL JOGGING OR INCHING DEVICE FABRIC FOLDING MACHINE YEAR 2006 SWINGING MOTION IS MINIMIZED TO ENSURE HIGH MACHINE CAPACITY AND INCREASE OUTPUT FOLDING BLADES ARE MOUNTED ON A CARRIAGE WHICH HAS A TO AND FRO MOVEMENT ACHIEVED BY SPECIAL STEEL ROLLER CHAIRS BALE PRESS YEAR 2001 BATH BEI HYDRAULIC BALE PRESS MACHINE FABRIC PROCESSING SINGEING MACHINE YAMUNA SINGEING MACHINE WIDER WIDTH – YEAR 2006 (2 UNITS) HYDRAULIC JIGGER KUSTER CALICO YEAR 2006 3E+06 VERTICAL DRYING RANGE YEAR 2006 CONTINUOUS DYEING RANGE – KUSTER CALICO KUSTER CALICO COLD PAD BATCH YEAR 2006 HARISH STENTER – SUPRA 5 DLXI ALMAC FINISH INSPECTION MACHINE YEAR 2006 SHRI NARAYAN COTEX FINISH PLAITING MACHINE YEAR 2006 Learn More

J-3787 HUAJIAN AND VEYSEL KUTUKLU BONELL COILERS AND ASSEMBLERS FOR MATTRESS SPRINGS ITEM 001 MAKE: HUAJIAN QUANTITY: 2 ITEM 002 MAKE: VEYSEL KUTUKLU QUANTITY: 2 ITEM 003 MAKE: VEYSEL KUTUKLU ITEM 004 MAKE: VEYSEL KUTUKLU QUANTITY: 1 ITEM 005 MAKE: VEYSEL KUTUKLU QUANTITY: 1 ITEM 006 MAKE: VEYSEL KUTUKLU QUANTITY: 1 Learn More

L-4532 DATGEN ROASTERS

MODELS AVAILABLE: DR 1, 3, 5, 12, 25, & 35

MODEL DR-1
CAPACITY: 0.5 TO 1.25 KGS

MODEL DR-3
CAPACITY: 0.1 KGS TO 2.5 KGS
HOURLY ROAST OUTPUT: 10 KGS
VOLTAGE: 230 VOLTS @ 60 Hz OR 400 VOLTS @ 50 Hz
40,000 BTU, 26.2 KW
FUEL: PROPANE OR NATURAL GAS
ROASTER WEIGHT: 100 KGS
ROASTER DIMENSIONS: 1400mm TALL X 1200mm LONG X 1100mm WIDE
EXHAUST PIPE DIAMETER: 130mm
COMPUTER CONNECTION: RS 485
DRIVE: 4 MOTORS
MOTOR POWER: 1 KW PER HOUR

MODEL DR-5
CAPACITY: 0.5 KGS TO 5 KGS
HOURLY ROAST OUTPUT: 15 KGS
VOLTAGE: 230 VOLTS @ 60 Hz OR 400 VOLTS @ 50 Hz
90,000 BTU, 26.2 KW
FUEL: PROPANE OR NATURAL GAS
ROASTER WEIGHT: 300 KGS
DIMENSIONS: 1470mm TALL x 1750mm LONG X 1140mm WIDE
EXHAUST PIPE DIAMETER: 150mm
DRIVE: 4 MOTORS
MOTOR POWER: 2 KW PER HOUR

MODEL: DR-12
CAPACITY: 0.5 TO 12 KGS PER BATCH (MAX 15 KGS OF GREEN BEANS)
OPERATING TIME: 5 TO 18 MINUTES PER BATCH, DEPENDING ON ROASTING PROFILES
ROASTER DIMENSIONS: 1160mm WIDE X 1430mm LONG X 1800mm TALL
WEIGHT: 410 KGS
POWER: 230 VOLTS @ 60 Hz OR 400 VOLTS @ 50 Hz
FUEL: PROPANE OR NATURAL GAS
GAS PRESSURE: NATURAL GAS ABOVE 2 KPA / PROPANE ABOVE 2.9 KPA
90,000 BTU PER HOUR
EXHAUST PIPE DIAMETER: 150mm
ROAST AIR SCFM/SCMH: 380 SCFM / 650 SCMH

MODEL: DR-30
CAPACITY: 2.5 TO 37.5 KGS

MODEL: DR-60
CAPACITY: 2.5 TO 75 KGS

 

Learn More

TT-8479 MAREN 72-OE-76 HORIZONTAL AUTO-TIE BALER, 6”, SIZE 30” X 38” X VARIABLE 1. FEATURES AN AUTOMATIC TIE SYSTEM THAT MINIMIZES STEPS AND MAXIMIZES OUTPUT 2. IMPROVES EFFICIENCY - AUTO-TIE REDUCES DOWNTIME AND MANUAL WORK 3. DELIVERS CONSISTENCY - UNIFORM BALES MAKE SHIPPING AND STORAGE EASIER QUANTITY: 1 Learn More

J-4903 PORTER SERGER FLANGER 4000 – EST-501 -WITH AUTOMATIC CONVEYOR FEED MODEL NUMBER: EST – 501 VOLTAGE: 220/240 VAC SINGLE NEEDLE SIZE : 6Z7027 135 x 7 #24 QUANTITY: 1 Learn More

YY-1486 ASSEMBLY CONVEYOR WITH FLIPPER, 1 MATTRESS PER MINUTE APPLICATION AREA: MATTRESS INDUSTRY, FOAM LAMINATION SYSTEM. MATERIALS: FINISHED OR SEMI-FINISHED MATTRESS, FOAM, FELT, QUILTED PANEL. GENERAL FEATURES: IT FLIPS THE MATTRESSES OF VARYING SIZES AND WEIGHTS WITHOUT REQUIRING ANY ADJUSTMENT. AS MATTRESSES ARE HELD BY PNEUMATIC ARMS, ANY RISK OF DEFORMATION DURING FLIPPING IS AVOIDED. WITH THE HELP OF ITS SENSORS, IT CAN DETECT AUTOMATICALLY WHETHER THERE IS A MATTRESS IN THE MACHINE. THE SAFETY BARRIER SURROUNDING THE MACHINE PROVIDES A SAFE WORKING ENVIRONMENT. FEATURES A LONG-LIFE FESTO BRAND PNEUMATIC SYSTEM WITH LOW AIR CONSUMPTION. STANDARD: SAFETY BARRIER, PNEUMATIC FLIPPING SYSTEM, PVC CONVEYOR. QUANTITY: 1 Learn More

YY-1357 HORIZONTAL CONTINUOUS FOAMING MACHINE, 21000 KG PER HOUR MAIN TECHNICAL SPECIFICATION: 1.TOTAL LENGTH: 35000mm × WIDTH 4500mm × HEIGHT 3000mm 2. FOAMING WIDTH 1000mm TO APPROXIMATELY 2300mm 3.FOAMING HEIGHT: 1200mm 4.FOAMING DENSITY: 8 KG PER m3 TO APPROXIMATELY 80 KG PER m3 5.FOAMING SPEED: 0 TO 6.8 METERS PER MINUTE 6.MAX TOTAL OUTPUT: 80 LITERS TO 350 LITERS PER MINUTE 7.MATERIAL SPRAYING METHOD: TROUGH 8.ALL KINDS OF VALVES, PIPES AND SPARE PARTS 9.THE MEMBRANE AUTOMATICALLY RECEIVES THE VOLUME INSTALLMENT (TO USE THE NEWEST INSTALLMENT, TO GUARANTEE THAT IT RECEIVES VOLUME SIDE PAPER SMOOTHLY); 10.USES ENVIRONMENTALLY-FRIENDLY EQUIPMENT TO PURIFY EXHAUST GAS, NO POLLUTION PRESENT 11. RESPONSIBLE FOR ELECTRICAL, MECHANICAL MAINTENANCE PERSONNEL TRAINING 12.THE BLOCK CUTTER MACHINE CUTS THE BUN LENGTH USING ROTARY ENCODER AND THICKNESS GAUGE TO SETUP AND CONTROL 13. MIXING HEAD FRAME PLUS OVERHAUL STAND, LADDER AND BARRICADE 14.MIXING HEAD IS GERMAN PRECISION TECHNOLOGY 15.FOAMING OVEN, DECLINING BOARD AND OVEN INNER CONVEYOR MACHINE PARTS 16. MIXING HEAD SIZE: Φ100mm 18.MIXING HEAD MOTOR: 30 KW 19.TOTAL POWER: ABOUT 80 KW Learn More