Search results for: 'lin'

REFERENCE NUMBER: T-6931 FAVA LINE OF SHORT PASTA, CAPACITY 4000 KG/H, YEAR 2000 TO 2002 FAVA LINE OF SHORT PASTA CAPACITY 4000 KG/H YEAR 2000 TO 2002 SHORT BEAN LINE 4000 KG.H 1 PRESS MODEL VELOCE 210,2 - 600 WITH TWO 600mm HEADS 10 PAIRS OF DIES 600mm 1 LANDUCCI CUTTING SYSTEM 3 PAIRS OF PEN CUTTERS 1 PAIR OF CUTTER 2 3-PASS SHAKERS MODEL 4000 MESH SHELVES WIDTH. 1072mm Z LIFT WITH STAINLESS STEEL CUPS TCM OF 10.9 / 13-STOREY SURFACE AREA OF APPROX. 211 TCM DRYING 15.9 / 13 FLOORS, SURFACE SQ.M. 324 Z LIFT WITH STAINLESS STEEL CUPS COOLER MOD. RAE 5 / 5.2 WITH 5 FLOORS WITH VIBRATING PASSAGE LENGTH 51000mm (OVERALL) WIDTH 4500mm HEIGHT 6500mm Learn More

REFERENCE NUMBER: T-6852 AUTEFA, DILO, SPINNBAU NEEDLE-PUNCHING COMPLETE LINE BRAND: AUTEFA, DILO, SPINNBAU SHORT DESCRIPTION: NEEDLE-PUNCHING COMPLETE LINE 3° NEEDLE-PUNCHING COMPLETE LINE (1970 CA.) COMPOSED OF: 1 SINGLE DOFFER CARD BY “BESSI” WORKING WIDTH 2500mm - HOPPER-FEEDER “TEMAFA” WITH SCALE (WEIGHPAN) AND TOP SILO - BREAST UNIT DIAMETER 1500mm WITH 7 PAIRS WORKERS/STRIPPER DIAMETER 220/74, RIGID METALLIC WIRES STILL USABLE 60% APPROX. - TRANSPORT ROLL DIAMETER 1285mm, RIGID WIRES STILL USABLE FOR 80% APPOX - SWIFT DIAMETER 1500mm, 6 PAIRS WORKERS/STRIPPER DIAMETER 215/74, SWIFT WITH RIGID WIRES STILL USABLE 90% CA., FLEXIBLE WIRES FOR WORKERS STILL USABLE 80% APPROX - DOFFER DIAMETER 1500mm, FRIGID WIRES STILL USABLE 90% APPROX. - FLY-COMB 1 CROSSLAPPER “MAK-AUTEFA”, INLET WORKING WIDTH 2500mm, EXIT WORKING WIDTH 3000mm 1 PRE-NEEDLER “DILO” NFZ25, MATR. 2387/1965, NO. 2580 NEEDLES/LM WITH MOBILE STRIPPER PLATE FOR HEAVY FELTS 1500 GRS/SQM AND/OR VOLUMINOUS FIBERS 2 LONGITUDINAL CUT “MACCHI” 1 TRANSVERSAL CUT “SPINNBAU” 1 WINDER IN WEIGHTING CELLS (METTLER) QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6848 SPINNBAU CARDING LINE, YEAR 2013 BRAND: SPINNBAU SHORT DESCRIPTION: CARDING LINE YEAR: 2013 INSTALLED 2014 LIKE NEW, LITTLE RUN TIME 4 HOPPER TEMAFA BLEND LINE, 1600mm WIDE, 1 WITH CONDENSER FED FROM TRIM MACHINE CARDING WILLOW – 800mm WIDE FEED BELT AND 1200mm WIDE – TEMAFA TEMAFA MIXMASTER BLENDING BIN – 3000mm WIDE X 8000mm LONG X 4600mm HIGH (FILL HEIGHT 3000mm). 72 CUBIC METER CAPACITY. TEMAFA FINE OPENER – 2000mm WIDE WITH PINS 3000mm SPINNBAU CARD FEEDING UNIT – FEED TRUNK, VIBRATING CHUTE, WEIGHT BELT 708mm BREAST SECTION WITH 3 WORKERS AND STRIPPERS, 1500mm MAIN WITH 5 W/S AND (2) 708mm DOFFERS. 1 FOUNDATIONS AND PLATFORMS. DILO PROFILINE – BATT WEIGHT CONTROL SYSTEM MAHLO WEIGHT MEASURING UNIT – QUALISCAN CMS-12 DILO LAYER CROSSLAPPER – TYPE DLS 30/60 – 3000mm INFEED AND UP TO 6000mm LAYDOWN. MAX WEB HEIGHT 650mm. MAXIMUM SPEED 125M/MIN. SPINNBAU LAP DRAFTER TYPE VST 19 – MAX 6000mm WORKING WIDTH. 9 ROLLER PAIRS. LIFTING DEVICE TO ALLOW FOR 600mm CLEARANCE. 159mm ROLLER DIAMETER. INFEED HEIGHT 650 mm BRUCKNER THERMOBONDING OVEN – 5000mm OVEN WITH 3 HEATING AND 2 COOLING ZONE. MAGNETIC BELT. 3 NATURAL GAS MAXON BURNER. SLITTING – 9 POSITION BRUCKNER CRUSH CUTTER SLITTING HEADS. PNEUMATIC LIFTING. 450mm KNIFE DIAMETER CROSS CUTTER – ROTARY CUTTER STYLE WITH CLAMPING. CAPABLE OF 3 CUTS/MINUTES FOR MATERIALS UP TO 200mm THICK. WINDING – ASCENDING BATCH STYLE WINDER. MAX ROLL DIAMETER OF 1200mm. 3000mm DRIVEN FEED CONVEYOR. MANDREL GUIDANCE SYSTEM, MANUALLY ADJUSTABLE BRAKE SYSTEM FOR CONTROLLING TENSILE FORCE AND COMPACTION. TEMAFA FILTER HOUSE – TFS 50. MAX FLOW 50,000 CUBIC METER/H ELECTRICL INFO – 3 X 480V/60Hz. CONTROLS 110V AC/24 DC. SIEMENS PLC QUANTITY: 1 Learn More

REFERENCE NUMBER: L-5674

COMPLETE DENIM ROPE DYEING LINE FOR 16 ROPES – YEAR 1980 (RECONDITIONED IN YEAR 2003)

 

COMPLETE DENIM ROPE DYEING LINE FOR 16 ROPES

STATUS: RUNNING

 

YEAR 1980, RECONDITIONED 2003

 

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: M-7480
BLOWING-CARDING LINE
MAKE: RIETER
ALL MACHINES YEAR 2002/2003
QUANTITY: 1 LINE

Learn More

R-1170 DELL’ ORCO VILLANI RAG TEARING LINE + BALE PRESS, YEAR 1989 TO 1999

DETAILS:
DELL’ ORCA VILLANI RAG TEARING LINE + BALLING MACHINE
COMPOSED BY:
ITEM 001
DELL’ ORCA VILLANI CUTTERS
YEAR: 1989
QUANTITY: 2

ITEM 002
DELL’ ORCA VILLANI MIXING ROOMS + BIN EMPTIER
TYPE: FA/3030/T
QUANTITY: 2

ITEM 003
DELL’ ORCA VILLANI VOLUMATIC FEEDER
MODEL: CARICATORE
TYPE: CS/1600
YEAR: 1999
QUANTITY: 1

ITEM 004
DELL’ ORCA VILLANI RAG TEARING MACHINE
4 CYLINDERS
YEAR: 1999
WIDTH: 1500mm
EACH DRUM MODEL: M/1500
TYPE: SFILACCIATRICE
QUANTITY: 1

ITEM 005
DELL’ ORCA VILLANI VOLUMATIC FEEDER
MODEL: CARICATORE
TYPE: CS/1600
YEAR: 1989
QUANTITY: 1

ITEM 006
DELL’ ORCA VILLANI RAG TEARING MACHINE
3 CYLINDERS
YEAR: 1989
WIDTH: 1500mm
EACH DRUM MODEL: M/1500
TYPE: SFILACCIATRICE
QUANTITY: 1

ITEM 007
DELL’ ORCA VILLANI BALE PRESS
TYPE: RA/100
WITH 2 CHAMBERS (ROTATIVE SYSTEM)
WITH WEIGHING DEVICE (SCALE FOR KG OF EACH BALE)
QUANTITY: 1

ITEM 008
DELL’ ORCA VILLANI DUST COLLECTING INSTALLATION
WITH BAGS TO COLLECT THE DUST
QUANTITY: 1

QUANTITY: 1 LINE

Learn More

C-3654 OSTHOFF SINGEING LINE WITH DESIZING U97/3, WORKING WIDTH 2,000mm, YEAR 2007

OSTHOFF SINGEING LINE WITH DESIZING
MAKER: OSTHOFF
YEAR: 2007
MODEL: U97/3
WORKING WIDTH: 2,000mm
ENTRY WITH TENSIONING UNIT
2 LAMP BURNER
DESIZING TANK
EXIT WITHER BATCHER
CHEMICAL PRODUCT STATION

QUANTITY: 1 LINE

Learn More

Learn More

REFERENCE NUMBER: P-2795

GEMATEX MAYER POLAR FLEECE LINE RAISING MACHINE YEAR 1999 WIDTH 2200mm

 

COMPLETE LINE FOR PRODUCTION OF FLEECE

GEMATEX MAYER

MODEL: POLAR FLEECE LINE

OPTISYSTEM NAPPER KRM 6725

YEAR: 1999

WIDTH: 2200mm

24 ROLLERS ON THE TAMBOUR

MACHINE IN PERFECT WORKING CONDITION

 

GEMATEX

YEAR: 1993

ROLLER WIDTH: 2100mm

 

MAYER & CIE

TYPE: MLPX II

KNITTING MACHINE

YEAR: 1991

UIGLENIA NUMBER NU 20 26 INCHES

NUMBER OF FEEDERS: 42 CONI

CENTRAL LUBRICATION SYSTEM SENSO

MACHINE IS CURRENTLY SET WEIGHT MICROFLEECE 210 GR/M2

 

MAYER & CIE

TYPE: MLPX II

KNITTING MACHINE

YEAR: 1993

UIGLENIA NUMBER NU 20 30 INCHES

NUMBER OF FEEDERS: 48 CONI

LUBRICATION SYSTEM SENSO CENTRAL

MACHINE IS CURRENTLY SET TO FLEECE WEIGHT OF 280 GR / M2

 

MAYER & CIE

TYPE: MLPX 1.6

KNITTING MACHINE

YEAR: 1998

UIGLENIA NUMBER NU 24 30 INCHES

NUMBER OF FEEDERS 48 CONI

CENTRAL LUBRICATION SYSTEM SENSO

MACHINE IS CURRENTLY SET FOR FLEECE WEIGHT OF 200 GR / M2

 

MAYER & CIE

TYPE: MLPX

KINTTING MACHINE

YEAR: 1999

UIGLENIA NUMBER NU 30 INCHES

NUMBER OF FEEDERS: 48

CENTRAL LUBRICATION SYSTEM SENSO

MACHINE IS CURRENTLY SET TO FLEECE WEIGHT OF 250 GR / M2

 

QUANTITY: 6

Learn More

REFERENCE NUMBER: M-3561

LINE FOR THERMO BONDED WADDING YEAR 1987 - FOR MATTRESS AND BUILDING SECTOR, ETC

 

LINE FOR THERMO BONDED WADDING  -YOC  1987  - FOR MATTRESS AND  BUILDING SECTOR, ETC.

( ESPECIALLY IN POLYESTER + NATURAL FIBERS MIXED).

THE LINE HAS A PRODUCTION OF 350/400 KGS PER HOUR WITH A WORKING WIDTH FROM 150 CMS INTIL 240.

 

COMPOSITION :

. BONINO LOADER   WORKING WIDTH  mm. 2800

. BONINO CARDING MACHINE WORKING WIDTH  mm. 2800 SINGLE DOFFER

. TECHNOPLANTS CROSS LAPPER WORKING WIDTH   ENTRY/EXIT mm. 3000

. SICAM OVEN  - 2 FIELDS. WORKING WIDTH  2400 mm. + COOLING SECTION

. TECNICA TESSSILE CUTTING MACHINE WITH HORIZONTAL AND VERTICAL CUT WORKING WIDTH  mm. 3000

. MECAP  PACKAGING MACHINE FOR ROLLS

 

QUANTITY: 1

Learn More