Search results for: 'FEEDER S'

REFERENCE NUMBER: M-3471 (880OKRSHH7) L NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 4500mm TECHNICAL DATA: RAW MATERIALS: NYLON, POLYESTER, POLYPROPYLENE, GLASS FIBER, ETC. FINENESS OF FIBER: 2.5 TO 10DENIER LENGTH OF FIBER: 38 TO 76mm MIXING RATIO BETWEEN TWO FIBERS: 20 TO 100% SPEED: 6m/min (PER 2.5-6D× 38-51mm) MAX. 5000 KG/DAY (PER 22 HOURS/DAY) RANGE OF GRAM WEIGHT: 100 TO 250g/m2 CARDING MACHINE FEATURES ARE ACCORDING GRAM WEIGHT: 250G/M², 300G/M² PROCESS FLOW CHART: BALE OPENER---PER-OPENER—FINE OPENER--FEEDER---CARDING MACHINE-- CROSSLAPPER--TRANSIT APRON---HIGH-SPEED PRE-NEEDLE LOOM---(2) HIGH-SPEED MAIN NEEDLE LOOM--CALENDER---CUTTER AND REWINDER QUANTITY AVAILABLE: 1 Learn More

TT-2209 DORNIER HTVS 8/J RAPIER LOOMS, WIDTH 1900mm, YEAR 1997, JACQUARD TOTAL QUANTITY: 4 Learn More

REFERENCE NUMBER: P-2795

GEMATEX MAYER POLAR FLEECE LINE RAISING MACHINE YEAR 1999 WIDTH 2200mm

 

COMPLETE LINE FOR PRODUCTION OF FLEECE

GEMATEX MAYER

MODEL: POLAR FLEECE LINE

OPTISYSTEM NAPPER KRM 6725

YEAR: 1999

WIDTH: 2200mm

24 ROLLERS ON THE TAMBOUR

MACHINE IN PERFECT WORKING CONDITION

 

GEMATEX

YEAR: 1993

ROLLER WIDTH: 2100mm

 

MAYER & CIE

TYPE: MLPX II

KNITTING MACHINE

YEAR: 1991

UIGLENIA NUMBER NU 20 26 INCHES

NUMBER OF FEEDERS: 42 CONI

CENTRAL LUBRICATION SYSTEM SENSO

MACHINE IS CURRENTLY SET WEIGHT MICROFLEECE 210 GR/M2

 

MAYER & CIE

TYPE: MLPX II

KNITTING MACHINE

YEAR: 1993

UIGLENIA NUMBER NU 20 30 INCHES

NUMBER OF FEEDERS: 48 CONI

LUBRICATION SYSTEM SENSO CENTRAL

MACHINE IS CURRENTLY SET TO FLEECE WEIGHT OF 280 GR / M2

 

MAYER & CIE

TYPE: MLPX 1.6

KNITTING MACHINE

YEAR: 1998

UIGLENIA NUMBER NU 24 30 INCHES

NUMBER OF FEEDERS 48 CONI

CENTRAL LUBRICATION SYSTEM SENSO

MACHINE IS CURRENTLY SET FOR FLEECE WEIGHT OF 200 GR / M2

 

MAYER & CIE

TYPE: MLPX

KINTTING MACHINE

YEAR: 1999

UIGLENIA NUMBER NU 30 INCHES

NUMBER OF FEEDERS: 48

CENTRAL LUBRICATION SYSTEM SENSO

MACHINE IS CURRENTLY SET TO FLEECE WEIGHT OF 250 GR / M2

 

QUANTITY: 6

Learn More

TT-5031 WORSTED SPINNING AND RE-COMBING INSTALLATION FOR FINE COUNT OF WOOL, YEAR 1983 TO 2006 WORSTED SPINNING AND RE-COMBING INSTALLATION FOR FINE COUNT OF WOOL COMPACT SYSTEM FROM NM.1/40 UP TO NM.1/80 PRODUCTION CAPACITY 3,500 KG PER 24 HOURS Learn More

TT-4103 LUMMUS GIN EQUIPMENT ITEM 001 LUMMUS 116 GINSTAND ITEM 002 LUMMUS 700 FEEDER (TO BE INCLUDED WITH GIN STAND) ITEM 003 LUMMUS DISTRIBUTOR CONVEYOR 16' ITEM 004 LUMMUS STEADY FLOW Learn More

TT-2883 SAND WASHING TROMMEL WASH PLANT ON PORTABLE TRAILER, 18” X 8’ 18″ X 8′ TROMMEL WASH PLANT ON HEAVY DUTY TRAILER HOPPER & SCREW FEEDER, GENERATOR & CONTROLS. EQUIP YOURSELF WITH THE GOLD STANDARD. QUANTITY: 1 Learn More

REFERENCE NUMBER: C-4330
FARREL 4LMSD COMPOUNDING LINE, 500 VOLT, CAPACITY 1500 LB/HOUR

FARREL SIZE 4LMSD CONTINUOUS MIXER
1750 RPM DC MOTOR THRU A LUFKIN MODEL S64CH GEARBOX
LUWA MAAG VACOREX MODEL 90/90 GEAR PUMP
FARREL UP-150 HOT OIL HEATED DIE FACE PELLETIZER
BERINGER
GALA SPIN DRYER
GALA 60 GPM WATER SYSTEM
GALA
STERLCO HOT OIL TEMPERATURE CONTROL UNIT
K-TRON WEIGH BELT FEEDER
K-TRON T35 FEEDER
K-TRON S200 FEEDER
(1) 220 KVA
(1) 75 KVA
(1) 63 KVA TRANSFORMERS
AND (2) CONTROL PANELS
PLATFORM
CAPACITY: 1500 LB/HOUR
ABLE TO DO FILLER COMPOUNDING
MASTERBATCH COMPOUDING

QUANTITY: 1 LINE

Learn More

TT-7737 KOMORI LITHRONE LS 40-5 HC, YEAR 2003 1. BRAND: KOMORI 2. MODEL: LITHRONE LS 40-5 HC 3. YEAR OF CONSTRUCTION: 2003 4. NUMBER OF IMPRESSIONS: 130 MIO. QUANTITY: 1 Learn More

TT-1196 NONWOVEN MACHINES FOR NEEDLEFELTS PRODUCTON, YEAR 1995 TO 2015 MACHINES FOR THE PRODUCTION OF NEEDLEPUNCHED FELTS 1. BLENDING THT YEAR 2015 2. OPENING: THT YEAR 2015 3. CARDING: F.O.R. YEAR 1995 UPDATED ON 2015 4. CROSSLAPPING: GUASCH YEAR 2000 UPDATED ON 2015 5. NEEDLEPUNCHING: CHANGSHU SNM YEAR 2015 6. SLITTING. CROSSCUTTING & WINDING: THT YEAR 2015 Learn More

REFERENCE NUMBER: A-2511 SUGAR AND ALCOHOL PLANT CANE UNLOAD SECTOR THE CANE UNLOADING SECTOR IS EQUIPPED WITH THE EQUIPMENT LISTED BELOW IN THE CONDITION TO CARRY OUT A GRINDING OF 8400 TCD WHICH CORRESPONDS TO A HARVEST OF 1800000 TONNES OF CANE / YEAR • 01 HILO UNLOADER OF STORAGE • 01 HILO UNLOADER OF MILLING • 01 FEEDER SUGARCANE TABLE WITH INCLINATION OF 25 INCHES • 01 FEEDER SUGARCANE TABLE WITH INCLINATION OF 45 INCHES • 02 CRANES WITH CAPACITY OF 20 TONNES • 01 TRANSPORTER TYPE CUSCH - CUSH OF 40 INCHES • 02 MOTOR PUMP WITH CAPACITY OF 1000 M³/H TO 50 MCW FOR CANE WASHING • 01 CONTAMINATED FLUID TREATMENT SYSTEM • 01 METAL STRUCTURE BUILDING MEASURING 20000 X 100000 mm CANE PREPARATION SECTOR THE SUGARCANE PREPARATION SECTOR IS EQUIPPED WITH THE FOLLOWING AUTOMATED EQUIPMENT WITH THE CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM AS SHOWN BELOW TO PERFORM A CRUSHING OF 7200 TCD WHICH CORRESPONDS TO A CROP OF 1600000 TONS OF SUGARCANE / YEAR • 01 METALLIC CONVEYOR OF 60 INCHES • 01 LEVELING OF CANE OF 60 INCHES • 01 CANE KNIVES SET TYPE COP-8 OF 60 INCHES • 01 CAN SHREDDER SET TYPE COP-5 OF 60 INCHES • 01 FEEDER ROLL 60 IINCHES • 01 RUBBER TRANSPORTER FOR CANE SHREDDED OF 60 INCHES • 01 TGM TURBINE FOR KNIVES SET • 01 TGM TURBINE FOR SHREDDER SET • 01 HIGH AND LOWER SPEED REDUCER OF KNIVES SET • 01 HIGH AND LOWER SPEED REDUCER OF SHREDDER SET • 01 REDUCER FOR METALLIC CONVEYOR • 01 REDUCER FOR FEEDER ROLL • 01 REDUCER OF SHREDDED CANE TRANSPORTER TYPE BELT MILLING CANE SECTOR THE CANE MILLING SECTOR OF THE PLANT IS EQUIPPED WITH THE FOLLOWING AUTOMATED EQUIPMENT WITH THE CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM TO CARRY OUT A GRINDING OF 7200 TCD CORRESPONDING TO A 222 - DAY HARVEST TO GRIND 1600000 TONS. CANE / YEAR • 04 MILLS OF 32 X 60 INCHES • 03 INTERMIDIATE TRANSPORTER OF 60 INCHES • 01 ROTARY SIEVE FOR MILLING 300 TCD • 01 TGM TURBINE OF DRIVING THE 1º / 2º MILLS • 01 TGM TURBINE OF DRIVING OF 3º / 4º MILLS • 01 REDUCER OF HIGH AND LOW SPEED OF DRIVING THE 1º / 2º MILLS • 01 REDUCER OF HIGH AND LOW SPEED OF DRIVING THE 3º / 4º MILLS • 03 REDUCER INTERMEDIATE TRANSPORTER OF 60 INCHES • 02 PUMPS OF 1ST JUICE • 02 PUMPS OF JUICE IMBIBITION OF 3RD FOR 2ND MILL • 02 PUMPS OF JUICE IMBIBITION OF 4TH FOR 3RD MILLS • 02 PUMPS OF MIXED JUICE OF MILL FOR JUICE TREATMENT STEAM GENERATION SECTOR THE STEAM GENERATION SECTOR OF THE PLANT IS PREPARED TODAY TO PERFORM A 7200 TCD GRINDING CORRESPONDING TO A 220 - DAY HARVEST TO GRIND 1600000 TON. CANE / YEAR WITH THE FOLLOWING AUTOMATED EQUIPMENT WITH CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM AS SHOWN BELOW • 01 BOILER N ° 01, MODEL: TS-3-150 MODIFIED FOR CBS-120-21 KG / CM² TODAY GENERATES AN AVERAGE OF 11000 KG / HR OF STEAM AT A PRESSURE OF 21 KG / CM² • 01 BOILER N ° 02, MODEL: TS-3-150-21 KG / CM² TODAY GENERATES AN AVERAGE OF 55000 KG / HR OF STEAM AT A PRESSURE OF 21 KG / CM² • 01 DEAERATOR WITH A CAPACITY OF 70 M³ • 01 78 INCHES BAGASSE METALLIC TRANSPORTER OF 32000 mm LENGTH • 01 48 INCHES BAGASSE TRANSPORTER FROM MILL TO BOILER • 01 48 INCHES BAGASSE RETURN TRANSPORTER FOR BOILER • 01 REDUCER OF BAGASSE TRANSPORTER FROM MILL TOBOILER • 01 REDUCER OF BAGASSE RETURN TRANSPORTER TOBOILER • 02 MOTO - PUMPS OF WATER FEEDING OF DEAERATOR • 02 MOTO - PUMPS OF WATER TREATMENT OF BOILER • 01 MOTO - PUMP WITH CAPACITY OF 300 M³/H TO 350 MCW FOR WATER FEEDING OF BOILER • 01 TURBO-PUMP WITH CAPACITY OF 300 M³/H TO 350 MCW FOR WATER FEEDING OF BOILER • 02 MOTO-PUMPS WITH CAPACITY OF 220 M³/H TO 50 MCW FOR WET SCRUBBER OF BOILER NO. 2 • 03 MOTO - PUMPS OF 40 M³/H TO 300 MCW • 01 METALLIC RESERVOIR WITH 200 M³ OF CONDENSED WATER CAPACITY POWER GENERATION SECTOR THE POWER GENERATION SECTOR IS EQUIPPED WITH THE FOLLOWING MODERN AND AUTOMATED EQUIPMENT LISTED BELOW TO MEET A GRINDING OF 8400 TCD • 01 THREE - PHASE GENERATOR OF 6250 KVA – 13800 VOLTS – 60Hz • 01 TGM STEAM TURBINE MODEL TM - 5000 • 01 REDUCER RENK - ZANINI WITH CAPACITY OF 5000 KW • SEVERAL ELECTRICALS PANELS OF THE GENERATOR • 01 TURBO GENERATOR HOUSE BUILDING • 02 WATER COOLING TOWERS FOR THE TURBO-GENERATOR • 02 MOTO - PUMPS OF 100 M³/H TO 30 MCW SUGAR FACTORY THE SUGAR FACTORY WAS SET UP BETWEEN 2007 / 2008 AND COMPLETELY AUTOMATED WITH THE CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM, PRODUCING AN AVERAGE OF 500000 KG OF VHP SUGAR PER DAY, A VALUE CORRESPONDING TO A MILLING OF 5000 TCD. THE TRANSPORT OF THIS SUGAR MANUFACTURED AT THE DECASA PLANT IS BEING TRANSPORTED BY MEANS OF A BUCKET VEHICLE WITH A DESTINATION INFORMED BY THE CUSTOMER. FOR THIS PLANT TO PRODUCE CRYSTAL SUGAR IC - 150, WE WILL NEED TO ACQUIRE AND ASSEMBLE THE FOLLOWING EQUIPMENT • SULFITATION EQUIPAMENT • BAGGING EQUIPMENT OF 50 KG BAGS • BUILD OR RENT AN INFLATABLE WAREHOUSE TO STORE SUGAR WITH THE INSTALLATION OF THIS EQUIPMENT, THE SUGAR FACTORY IS PREPARED TO RECEIVE A MILLING OF 5000 TCD CORRESPONDING TO A DAILY PRODUCTION OF 500000 KG OF CRYSTAL SUGAR IC - 150 PER DAY ALCOHOL DISTILLERY THE DISTILLERY WAS INSTALLED IN 1982 WITH A CAPACITY OF 300000 LITERS OF HYDRATED ALCOHOL PER DAY. WHEN THE FORMER OWNER'S UNIT WAS SOLD TO THE OLIVAL TENÓRIO GROUP IN 2003, THE NEW ENTREPRENEUR INVESTED IN THE MANUFACTURE OF ALCOHOL IN 2006 BY INSTALLING ANOTHER COLUMN OF DISTILLATION WITH A CAPACITY OF 300,000 LITERS AND AUTOMATED 100% INCREASING ITS PRODUCTION CAPACITY TO 600,000 LITERS OF HYDRATED ALCOHOL PER DAY • 02 TYPE “A” DISTILLATION COLUMNS WITH CAPACITY TO PRODUCE 300 M³ OF ALCOHOL / DAY • 02 TYPE “B” RECTIFICATION COLUMNS WITH CAPACITY FOR PRODUCTION OF 300 M³ OF ALCOHOL / DAY • 01 TYPE “A” DISTILLATION COLUMN WITH CAPACITY FOR PRODUCTION OF 300 M³ OF ALCOHOL / DAY • 01 TYPE “B” RECTIFICATION COLUMN WITH CAPACITY FOR PRODUCTION OF 300 M³ OF ALCOHOL / DAY • 09 TUBULAR HEAT EXCHANGERS TYPE “K” • 02 TUBULAR HEAT EXCHANGERS TYPE “J” • 02 TUBULAR HEAT EXCHANGERS TYPE “E” • 02 TUBULAR HEAT EXCHANGERS TYPE “E1” • 02 TUBULAR HEAT EXCHANGERS TYPE “E2” • 02 TUBULAR HEAT EXCHANGERS TYPE “R” • 02 TUBULAR HEAT EXCHANGERS TYPE “R1” • 11 NEW FERMENTATION VATS WITH A CAPACITY OF 300 M³ • 03 PLATE HEAT EXCHANGERS FOR THE WORT • 05 PLATE TYPE HEAT EXCHANGERS FOR VATS • 01 VAT FOR WINE • 01 CO₂ RECOVERY COLUMN • 02 PUMPS WITH A CAPACITY OF 600 M³ / H - 50 MCA FOR THE COOLING SYSTEM OF THE PLATE HEAT EXCHANGERS • 01 PUMP WITH A CAPACITY OF 800 M³ / H FOR THE COOLING SYSTEM OF THE PLATE HEAT EXCHANGERS • 02 CENTRÍFUGES HAD - 90 • 04 CENTRÍFUGES HAD - 60 WITH THE INSTALLATION OF THIS EQUIPMENT, THE ALCOHOL DISTILLERY IS PREPARED TO PRODUCE 600000 LITERS OF ALCOHOL PER DAY, RECEIVING A MILLING OF 6500 TCD CORRESPONDING TO 2500000 TONS OF CANE / YEAR Learn More