Search results for: 'Winder+cu'

INVENTORY NUMBER: E-4258 POLYESTER PACKING TAPE MACHINE (FROM RECYCLED PET SCRAP): XDC TSE-65/32 PET PRODUCTION CONDITION: NEW 1. ELECTRICAL VOLTAGE: 380V/3P/50HZ OR AS PER CUSTOMER 2. MATERIAL: PET SCRAP 3. MAX. EXTRUSION OUTPUT: 350KG PER HOUR NOTE：PRODUCTION CAPACITY DEPENDS ON RAW MATERIAL AND OPERATION. 4. SPECIFICATION：WIDTH OF TAPE 9 TO 24 mm, THICKNESS: 0.5 TO 1.2 mm 5. LINE SPEED：80M/MIN 6. CENTER HEIGHT OF EXTRUDER: 1000 mm 7. OPERATION DIRECTION: FROM RIGHT TO LEFT 8. POWER REQUIREMENT: 212KW（APPROX. 127KW AT CONTINUOUS USAGE） 9. COOLING RECYCLE: ≤20℃ ≥0.3MPA ～2T/H 10. AIR CONSUMPTION: 0.4 CUBIC METER PER MINUTE; PRESSURE ＞0.5MPA QUANTITY AVAILABLE: 1 Learn More

BRUCKNER BOPP EXTRUSION LINE, WIDTH 8200mm, THREE LAYERS, BUILT 1992, COMPLETED WITH AN ATLAS SLITTER/REWINDER, MODEL CW, WIDTH 8200mm. AND FURTHER AUXILIARIES, INCLUDING SPARE PARTS. NAMEPLATE CAPACITY 20,000 T/Y. RAW MATERIALS SECTION - 4 SILOS 250 M3 ALUMINIUM - 2 SILOS 100 M3 ALUMINIUM - 2 SILOS 50 M3 ALUMINIUM - PNEUMATIC TRANSPORT SYSTEM; COMPUTERIZED DOSING SYSTEM, HOPPERS AND SCALES FOR THE THREE EXTRUDERS EXTRUSION SECTION - MAIN EXTRUDERS: 2 MITSUBISHI CASCADE EXTRUDERS Ø 300 mm AND 250 mm - CO-EXTRUDERS: 2 BANDERA EXTRUDERS Ø 100 mm, EQUIPPED WITH MELT PIPES - DIE: SIMPLAST, WIDTH 1,140 mm, GAP 2 - 3.75 mm, 40 PUSH/PULL BOLTS - CHILL ROLL: Ø 3 M, 1,900,000 KJ/H COOLING CAPACITY - WATER BATH: 1.500.000 KJ/H CAPACITY MDO (MACHINE DIRECTION ORIENTATION) SECTION - PREHEATING INFRARED 130 KW - PREHEATING: 16 CHROMIUM PLATED ROLLS Ø 614 mm - STRETCHING: 6 CHROMIUM PLATED ROLLS Ø 180 mm, EQUIPPED WITH RUBBER NIP ROLLS Ø 150 mm - ANNEALING: 2 CHROMIUM PLATED ROLLS Ø 614 mm TDO (TRANSVERSE DIRECTION ORIENTATION) SECTION - TOTAL LENGTH: 66 METER - PREHEATING: 5 SECTIONS - STRETCHING : 5 SECTIONS - ANNEALING : 5 SECTIONS - NEUTRAL : 1 SECTION - COOLING : 2 SECTIONS - INLET 850 – 1,050 mm WIDTH - OUTLET 7,600 – 8,600 mm WIDTH PRS (PULL ROLL STAND) SECTION - EDGE TRIM CUTTERS - ESSECI FLAME TREATER, BURNER, CHROMIUM PLATE ROLL, RUBBER NIP ROLL - CORONA TREATER 1: 3 DISCHARGE BARS, SILICON ROLL, RUBBER NIP ROLL - CORONA TREATER 2: 2 DISCHARGE BARS, EDGE BAR, SILICON ROLL, RUNNER NIP ROLL MEASUREX/HONEYWELL GAUGE CONTROL SYSTEMS - 8.5 M SCANNER FOR FILM - 1.2 M SCANNER FOR CAST SHEET - MAIN THICKNESS CONTROL UNIT CONNECTED TO THE BOLT OF THE EXTRUSION DIE FOR LIP ADJUSTMENT WINDER - 2 TURRETS KAMPF WINDER - AUTOMATIC CUT / TURRET / MILL-ROLL CHANGE - WINDING CORES: 108 STEEL WINDING CORES Ø 500 mm CONTROL UNIT - THE LINE IS EQUIPPED WITH A FULLY INTEGRATED CONTROL SYSTEM SUPPLIED BY BRUCKNER MILL ROLL STAND (SEMI-FINISHED PRODUCTS WAREHOUSE) - 150 TOTAL POSITIONS, OF WHICH 50 IN HEATED CLOSED ROOM - 1 PICK-UP FOR LOADING / UNLOADING WINDER AND SLITTER - 1 MANUAL EMERGENCY PICK-UP FOR LOADING/UNLOADING WI NDER AND SLITTER AND MAINTENANCE - 1 SHUTTLE TO MOVE MILL ROLLS IN AND OUT OF THE WAREHOUSE - 1 MAIN CRANE FOR MOVING MILL ROLLS / EMPTY CORES RECYCLING - HERBOLD GRINDER FOR SCRAP RECOVERY - 4 FLUFF SILOS - 1 EREMA MACHINE FOR REGRANULATION, APPROX. 700 KG/H SLITTER - ATLAS CW MACHINE, BUILT 1992, MAJOR UPGRADE 2010 - INLET MILL-ROLLS MAX Ø 1.2 M, WIDTH 8.2 M - 16 REWINDING STATIONS, WIDTHS FROM 400 mm TO 2450 mm, MAX Ø 1,000 mm - AUTOMATIC KNIVES AND RE-WINDING ARMS POSITIONING PACKING - SEMI-AUTOMATIC BALLOTTI LINE FOR CONDITIONING OF ROLLS AND PALLETS, BUILT 2000 - CONVEYORS - SCALING - STRAPPING - STRETCHING UTILITIES - 3 COMPRESSORS 3 BARS FOR COMPRESSED AIR CIRCUIT FOR RAW MATERIALS HANDLING - 2 COMPRESSORS 6 BARS FOR COMPRESSED AIR - 2 CHILLERS FOR CHILLED WATER PRODUCTION - 2 WATER COOLING TOWERS - 1 BOILER FOR THERMAL OIL PRODUCTION - 3 TRANSFORMERS 15 KV TO 380 V ADDITIONAL EQUIPMENT - SPARE PARTS FOR ALL OF THE ABOVE - TECHNICAL CONSUMABLES - IT EQUIPMENT FOR CONTROLLING THE MANUFACTURING EQUIPMENT AND DATA TRAFFIC, SUCH AS SERVERS, SWITCHES AND CABLING - LABORATORY EQUIPMENT FOR QUALITY CONTROL PURPOSES Line was producing 20 to 40 microns , line can produce down to 10 to 12 microns Learn More

REFERENCE NUMBER: C-2506 MURATA MACHCONER WINDER MACHINE TYPE 7-5 WITH 60 SPINDLES SPECIFICATIONS: MURATA MACHCONER WINDER MACHINE TYPE 7-5 YEAR: 2000 NOS OF SPINDLES: 60 QUANTITY AVAILABLE: 5 Learn More

J-2628 COMPLETE BIAS BINDING SYSTEM (SEWING, SLITTING & WINDING SYSTEM) – NEW SEWING MACHINE FOLDS FABRIC, STITCHES EDGE OF FABRIC FOR TWILL EFFECT WORKS TOGETHER WITH WINDING MACHINE AND STRIP CUTTING MACHINE WINDING MACHINE OPENS PREVIOUSLY FORMED TUBE MATERIAL, SPIRALLY, IN THE BIAS, AND REWINDS A SINGLE PLY ROLL, AT BOTTOM OF MACHINE THERE IS A KNIFE TO CUT SEWING FABRIC SEPARATELY, PREPARED FOR THE SLITTER SLITTER MACHINE HAS MANUAL, SEMI-AUTOMATIC AND FULLY AUTOMATIC MODES. WILL SLIT ANY TYPE OF MATERIAL ON THE ROLL (OPEN KNITS, WOVEN FABRIC, LEATHER, POLYESTER, SOME PAPER PRODUCTS, NONWOVEN, ETC) QUANTITY: 1 SLITTER, 1 WINDER Learn More

TT-3177 EDELMANN WINDER, WORKING WIDTH 7000mm, YEAR 1993 QUANTITY: 1 Learn More

REFERENCE NUMBER: M-0989 EMERSON & RENWICK VINYL WALLPAPER DOUBLE WIDTH SCREEN PRESS YEAR 1988 EMERSON & RENWICK VINYL WALLPAPER DOUBLE WIDTH SCREEN/GRAVURE PRESS BUILT IN 1988 RENOVATED PARTS IN 2004 / 2007 / 2009 WITH PROTECTION AGAINST PAPER BREAKAGE COMPRISING : DOUBLE UNWINDER GASBURNT OVEN WEB GUIDER ERHARD & LEIMER TENSION REGULATOR 5 DOUBLE PRINTING STATIONS E&R (SCREEN AND GRAVURE), EXTRACTION, CONTROL CABINETS WEB GUIDER ERHARD & LEIMER (TO BE RE-INSTALLED) 1 PRINTING STATION WITH PRINT UNIT AND CONTROL CABINET 5 ZONE GASBURNT OVEN EBS6100 – LENGTH 28 M 1 COOLING UNIT WEB GUIDER + WIDTH CUTTING UNIT SIDE CUTTING UNIT WITH PNEUMATIC TRANSPORT TO WASTE BIN CREEPER WINDER E&R FOR BIG ROLLS (TO BE RE-INSTALLED) WINDER CMS FRASTAN FOR 10 M ROLLS (DEC. 2004) SHRINK FILMING TUNNEL B&B MAF (2009) + ROLLER CONVEYOR PIPE AND FITTINGS ELECTRICAL CONTROL CABINETS ELECTROMECHANICAL INSTALLATION (SPRINKLER, UTILITIES) QUANTITY AVAILABLE: 1 Learn More

TT-8038 FIBRILLATED MESH FOR CEMENT USE AND TWISTED FIBER MAKING MACHINE/POLYMER MACRO WAVE FIBRE EXTRUDER EXTRUSION LINE, 2.2 KW 1. BRAND: JIAMEI 2. MODEL: JM65 3. TYPE: SINGLE SCREW EXTRUDERS 4. CONDITION: USED QUANTITY: 1 Learn More

TT-6718 TACOME CONTACT WINDER, WIDTH 4400mm QUANTITY: 1 Learn More

TT-6210 KAMPF SLITTER REWINDER, WORKING WIDTH 1000mm 1. BRAND: KAMPF 2. TYPE OF EQUIPMENT: SLITTER REWINDER 3. WORKING WIDTH 1000mm QUANTITY: 1 Learn More

YY-2441 AUTO VERTICAL STITCH SEWING MACHINE, MATTRESS BORDER WIDTH 560mm (22 INCHES) APPLICATION: THIS MACHINE IS USE FOR VERTICAL STITCH SEWING MATTRESS DECORATIVE BORDER, THE MACHINE IS EQUIPPED HIGH QUALITY SEWING HEAD, THE SPEED OF SEWING CAN REACH 3.5M/MINUTES, SEWING THICKNESS CAN REACH 15MM. ACCORDING TO USER’S REQUESTS TO CHOOSE DIFFERENT WIDTH MATTRESS BORDER FOR ARISE QUALITY LEVEL OF MATTRESS. THE ADVANCED PLC CONTROL SYSTEM TO ENSURE ACCURATE SEWING AND NICE RESULT. IT EQUIPPED SPECIAL DESIGNED MATERIAL FEEDING AND WINDER SYSTEM WITH SMART SENSOR. IT IS SUCCESSFULLY ACCOMPLISH COMPLETE AUTOMATION PRODUCTION. THIS IS THE PERFECT AND PROFESSIONAL SEWING EQUIPMENT FOR THE PRODUCTION OF LUXURY MATTRESSES. Learn More