Search results for: 'santex co'

TT-3844 SANTEX THERMOBONDING OVEN, WORKING WIDTH 2500mm, YEAR 1995 QUANTITY: 1 Learn More

REFERENCE NUMBER: J-2912 SANTEX THERMOBONDING OVEN FOR HIGH DENSITY NONWOVENS, WORKING WIDTH 2600mm -CURRENTLY PROCESSING VIRGIN AND RECYCLED PET MAKE: SANTEX FOR PROCESSING HIGH DENSITY NONWOVENS FOR AUTOMOTIVE INDUSTRY, SOUND ABSORBENT MATERIALS, BEDDING AND FURNITURE WADDING YEAR: 1996 (PERMANENTLY OVERHAULED SO IN GOOD CONDITION) WORKING WIDTH: 2500mm (WEB WIDTH) CAPACITY: 100 TO 4000 gr/m2 WITH MODIFICATIONS TO ALLOW PROCESSING OF 4000 gr/m2 TO 25mm HEIGHT, INLET HEIGHT 5 TO 100mm WITH DOUBLE COMPRESSION GLASS-FIBER BELT GAS HEATED, SINGLE BURNER COOLING ZONE FLOORSPACE REQUIRED (FOR FULLY ERECTED OVEN) APPROXIMATE LENGTH: 9000mm + 3000mm INTAKE TRANSPORT BAND WIDTH: 5500mm HEIGHT: 3500mm + SPACE FOR FANS AND PIPING HEATING CHAMBER LENGTH: APPROXIMATELY 5000mm BURNER BTU (OR KILOCALORIES): INFORMATION COMING SOON IT IS POSSIBLE TO FEED THE OVEN WITH THE WEB WIDTH OF 2600mm, WHICH WILL ALLOW FOR THE TRIMMED WIDTH OF 2500mm AND TAKING OUT TWO PANELS EACH OF 1220mm FROM THIS STATUS: CURRENTLY RUNNING AND POSSIBLE TO SEE UNTIL END OF JUNE, 2020 QUANTITY: 1 Learn More

REFERENCE NUMBER: M-5344 (220RCBAXX1) L SANTEX SANTASTRETCH DOUBLE PADDING SQUEEZER YEAR 2005 SANTEX SANTASTRETCH SWISS DOUBLE PADDING SQUEEZER MACHINE YEAR 2005 MODEL BALOON SQUEEZER ENTRY UNIT WITH TURN TABLE DE-TWISTER WITH 1ST PADDING MANGLE 2ND SQUEEZER WITH CHEMICAL WASHING TANK MAGNETIC STRETCHER EXIT WITH CONVEYOR WIDTH: 1400mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5345 (220WENQXX1) L SANTEX SANTASHRINK 2-CHAMBER SINGLE PASS RELAX DRYER YEAR 2005 WIDTH 2400mm SANTEX SANTASHRINK SWISS TWO CHAMBER, SINGLE PASS RELAX DRYER YEAR 2005 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-9080 SANTEX SANTASOFT 200 SOFTING MACHINE 2000mm YEAR 2000 MAKER: SANTEX MODEL: SANTASOFT 200 YEAR 2000 ROLLER WIDTH: 2000mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4255 (101095MAN9R) K SANTEX OVEN YEAR 1992 WIDTH 2500mm - GAS SECOND HAND SANTEX OVEN WIDTH 2500mm YEAR 1992 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1266 (010195GHB12RE) A SANTEX OVEN, WIDTH 2400 MM, YEAR 1992 SANTEX OVEN WORKING WIDTH: 2400 MM YEAR: 1992 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1795 (77057BHB6R) SANTEX SANTASHRINK YEAR 1997 WIDTH 1800mm SANTEX SANTASHRINK YEAR 1997 WIDTH 1800mm CONSISTING OF: ENTRY UNIT DRY CHAMBERS VIBRATION AND DAMPER UNIT EXIT UNIT ALL MOTORS ELECTRIC PANELS EXHAUSTER MOISTURE MEASURE UNIT ENERGY SAFE UNIT CONTROL COMMANDER SANTAMATIC 2000 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4608 (11116SWJK10R) L VILLARS-SANTEX HOTMELT POWDER SCATTERING AND LAMINATING MACHINE YEAR 1993 WIDTH 2100mm LAMINATING LINE MANUFACTURER: VILLARS (CH) ACTUALLY SANTEX YEAR OF CONSTRUCTION: 1993 WORKING WIDTH: 2200mm (NOMINAL WIDTH 2100mm) OPERATING VOLTAGE: 3X380(400)V TOTAL POWER: 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION: INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997): 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS: 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED. ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM MANUFACTURER: MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR OF CONSTRUCTION: 1999 OPERATING VOLTAGE: 3X380V CAPACITY ACCUMULATOR: +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE MANUFACTURER: MENZEL YEAR OF CONSTRUCTION: 2000 OPERATING VOLTAGE: 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT. KNOWN PROBLEM: PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) MISCELLANEA SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS CAN BE INSPECTED BUT NOT IN PRODUCTION MACHINE WILL BE DISMANTLED AT END OF NOV 2014 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1434 (66014ZERW5RC) SANTEX DRYER TYPE SANTASHRINK JUMBO YEAR 1996 WIDTH 2600mm SANTEX DRYER TYPE SANTASHRINK JUMBO YEAR 1996 -USEFULL WIDTH 2600 mm (NOMINAL WIDTH 2400 mm) -1 UNIT PIN CHAIN STENTERING 5.5 ENTRANCE LOND WITH FOULARD WITH MAHLO -5 FIELDS OF 2 MT EACH ONE. -GAS HEATED (CHANCE OIL SYSTEM) -ONE FAN EACH FIELD DRIVEN WITH AC MOTOR AND INVERTER -DOUBLE PASSAGE WITH PTF BANDET -EXHAUST FAN -MAX TEMPERATURE 200 ° -SPEED OF THE CARPET 0/30 MT/MIN (DRIVEN WITH A.C MOTORS AND INVERTER) -INLET FROM FOLD (NO PADDER AT INLET) -OUTLET WITH CARPET AND FOLDING DEVICE -DEVICE TO CONTROL UMIDITY INSIDE OF THE CHAMBER (PLEVA SYSTEM) -CONTROL PANEL WITH INSTRUMENTS TO CONTROL SPEED, TEMPERATURE . -SANTAMATIC 2000 GF 1 (COMPUTER) -MACHINE IS IN VERY GOOD CONDITION QUANTITY AVAILABLE: 1 Learn More