Search results for: 'Control+pan'

P-5079 COMMERCIAL JOPER CAST IRON CRM-30 ROASTER 30 KILOS

WHAT WE HAVE HERE IS A VERY RUGGED CAST IRON ROASTING FRAME AND ROASTING CONTACT CLEARANCES WITH THE MACHINE - JUST PLAIN SOLID AND DOES NOT MOVE UNDER LONG OR EXTENDED USE. DOUBLE WALL DRUM MEANS THAT THE HEAT IS ALL DESIGNED TO GO THROUGH THE CENTER OF THE ROASTING CHAMBER, NOT "ONTO" THE DRUM EXTERIOR. TOTAL TRUE CONVECTION. NOT ONLY IS THIS THE SAME STYLE FROM THE OLD GOTHOT & BARTH ROASTER DAYS. . . BUT EVEN BETTER AS THE SHAFT DESIGN SO THAT BEARINGS ARE EXTERNALLY MOUNTED AND ADDITIONALLY ARE AIR COOLED FOR LONG LIFE AND TROUBLE-FREE CONTROL. EVEN THE SIDE PANELS OR PRODUCT FLIGHTS HAVE A LONGER CURVE POSITIONING MORE PRODUCT FLOW INTO THE HOT AIR STREAM, RESULTING IN A SLIGHTLY MORE RAPID ROAST WITH MORE EVEN BEAN INTERIOR AND EXPANSION THAT FRANKLY LEADS THE INDUSTRY.

ALL THIS COMMENTARY ABOVE MEANS THIS ROASTER SIMPLY IS MORE QUIET THAN ANYTHING ON THE MARKET. PERIOD. THERMAL INSULATION WITH HIGHEST QUALITY OF FIBER FOR LOW GAS CONSUMPTION; DIGITAL TEMPERATURE CONTROL. CYCLONE IS SEPARATE. THE COOLER, BEING TOTALLY SEPARATE ALSO HAS THE LARGEST AIR COLLECTION AREA OF ANY ROASTER MADE ALLOWING FOR TOTAL AMBIENT COOL COFFEE IN LESS THAN THREE MINUTES. ADD TO THIS PACKAGE A LOADER OR YOUR CHOICE OF DESTONERS AND EVEN YOUR CHOICE OF CONTROL METHODS.

DATA INFORMATION:
BATCH CAPACITY: 30 KG / 66 LBS
CONTROL DESIGN: MANUAL
CAPACITY PER HOUR: 120 KG / 265 LBS
ROASTING TIME: 12-18 MIN (4 BATCHES AN HOUR)
EXHAUST AIR TREATMENT: OPTIONAL
COOLING CYCLONE: OPTIONAL
PRE-COOLING WITH WATER IN DRUM: OPTIONAL
COOLING TIME: 3-4 MIN
TYPE OF COOLING: AIR AMBIENT
SAFETY DEVICE: YES
BURNER POWER: 110 KW / 375000 BTU
BURNERS MANUFACTURER: RIELLO
OPERATION TYPE BURNER: BS2D-2 STAGE
FUEL TYPE: PROPANE/NAUTRAL GAS/DIESEL
SIDE OF OPERATION: LEFT
POWER REQUIREMENTS: 20 AMP
VOLTAGE/FREQUENCY/PHASES: 400+N-230 V / 50-60 HZ / 3 PH
9 AMP. . . 3 PHASE 50/60 HZ PREFERRED, YOUR CHOICE OF 220/440 - SINGLE PHASE AVAILABLE AT SPECIAL REQUEST
(NOTE ON 3 PHASE. . . NOT ONLY IS IT LESS EXPENSIVE TO OPERATE, BUT IT RUNS MORE QUIETLY THAN SINGLE PHASE WHENEVER OR WHEREVER IT IS USED. KEEP THIS IN MIND FOR ANY MACHINERY.)
Ø EXHAUST CHIMNEY (ROASTER CYCLONE): 250MM / 9,8 INCH
Ø EXHAUST CHIMNEY (COOLER): 250MM / 9,8 INCH
Ø HOPPER ROAST CHIMNEY: 150MM / 5,9 INCH
ROASTER WEIGHT WITH CYCLONE: 1050 KG / 2310 LBS
COOLER WEIGHT: 300 KG / 660 LBS
ROASTER FAN MOTOR: 1, 5 HP
COOLER FAN: 4 HP
DRUM GEARBOX: 1 HP
COOLER GEARBOX: 0, 75 HP
BUILT TO UL295 STANDARDS.

QUANTITY: 1

Learn More

C-4355 FULL-AUTO WET TISSUE FOLDING MACHINE Y-12 AND FULL-AUTO WET TISSUE PACKING MACHINE Y-360, CAPACITY 40 TO 120 PCS/PACKAGE

OFFER 001
Y-360 FULL AUTOMATIC RECIPROCATING TYPE PACKING MACHINE
PRODUCTION TYPE: BABY WET TISSUE
PRODUCTION PROCESS: CONNECT TO Y-2700 FOLDING MACHINE (OR Y-12 FOLDING MACHINE) → FEEDING WIPE AUTOMATIC →CONVEYING TO PACKING MACHINE → SETTING PACKING FILM → SETTING WINDOW HOLE LABEL → CENTRAL SEALING →END SEALING AND RECIPROCATING CUT → OUTPUT FINISHED PRODUCTS.
MAINTECHNICAL PARAMETER: (SUITABLE TO PACK: 5 TO 120PCS/BAG)
PRODUCT SPEED: 55 TO 60 BAG/MIN
DIAMETER OF RAW FILM ROLL: ≤380mm
WIDTH OF RAW FILM ROLL: ≤420mm
WRAPPING MATERIAL: PP, OPP, PET, PE, AND ALL SUITABLE FILMS
SHAPES OF PACKING: PILLOW TYPE PACKAGING
PACKING LENGTH: 110 TO 300mm (TOUCH SCREEN SETABLE)
PACKING WIDTH: 80 TO 150mm (ADJUSTABLE)
HEIGHT OF PACKING: 10 TO 100mm (ADJUSTABLE)
HORIZONTAL SEALING PATTERN: RECIPROCATION HEAT SEALING
DRIVE MOTOR PATTERN: ALL SERVO DRIVE
CONTROL PATTERN: YASKAWA SIMOTION CONTROL SYSTEM
OPERATION INTERFACE: 7 INCH LCD
FILM SUPPLY SYSTEM: SERVO DRIVE
HORIZONTAL SYSTEM: SERVO DRIVE
FEEDING SYSTEM: SERVO DRIVE
LABELING SYSTEM: SERVO DRIVE
PUNCHING SYSTEM: SERVO DRIVE
HORIZONTAL PROTECTION: TORQUE OVERLOAD PROTECTION
AIR REQUIREMENTS: 0.5 TO 0.8 MPA 0.01 M3/MIN
ELECTRIC POWER REQUIREMENTS: 380VAC 50/60HZ
GENERAL POWER: 7.6KW
DIMENSION OF MACHINE: 3610 × 1150 × 1900mm
STANDARD EQUIPMENT: DATE PRINTING UNIT, PUNCHING UNIT, LABELLING UNIT, INSERTING CORNER UNIT, ELECTRICAL EYE TRACKING AUTOMATICALLY
(2) SYSTEM CHARACTER
1. THE PACKING FILM ADOPTS MECHNICAL TENSION CONTROL
2. TWO LABEL MACHINE, ONE SUB-LABELING, THE OTHER IS ANTI-COUNTERFEITING LABEL
3. PUNCHING AT THE PACKING FILM AUTOMATICALLY
4. HEATING PRINTING (DATE) DEVICE
5. FOUR BACK AND FORTH TRANSVERSE SEALING DEVICE WITHINSERT CORNER BY CYLINDER FORM
6. EIGHT SERVO MOTORS, CONTROLLING FEEDING PACKING FILM, TRANSVERSE SEALING, FEEDING TISSUE RESPECTIVELY
7. LENGTHWAYS SEALING DEVICE, CONTROL THEOPEN-CLOSEBY CYLINDER. THE SEALING WHEEL ARE APART AUTOMATICALLY WHEN THE MACHINE STOPS
8. PUNCHING, LABELING AND THE EYE MARK’S RELATIVED POSITION CAN BE SET IN THE TOUCH SCREEN.
9. AUTOMATIC FEEDING RAW MATERIAL DEVICE
10. COLOUR TOUCH SCREEN, MOTION SYSTEM CONTROL
11. MAIN MOTOR ADOPTS FAMOUS BRAND
12. MAIN MACHINE ADOPTS FRAMES FORM

OFFER 002
Y-360 FULL AUTOMATIC RECIPROCATING TYPE PACKING MACHINE
YASKAWA ELECTRICITY FROM JAPAN
ITEM NUMBER: 1
MOTION CONTROLLER
JEPMC-MP2300S-E
YASKAWA
QUANTITY: 1
ITEM NUMBER: 2
EXTENDED MODULE
R7K4FML-6-DCA32A
YASKAWA
QUANTITY: 1
ITEM NUMBER: 3
SERVO MOTOR/SERVO UNIT
SGMJV-08ADE6S /SGDV-5R5A11A
YASKAWA 750W
QUANTITY: 5
ITEM NUMBER: 4
SERVO MOTOR/SERVO UNIT
SGMGV-13ADC61 /SGDV-120A11A
YASKAWA 1.3KW
QUANTITY: 1
ITEM NUMBER: 5
SERVO MOTOR/SERVO UNIT
SGMGV-20ADA61/SGDV-180A11A
YASKAWA 1.8KW
QUANTITY: 1
ITEM NUMBER: 6
SERVO MOTOR/SERVO UNIT
SGMGV-09ADC61/SGDV-7R6A11A
YASKAWA 0.85 KW
QUANTITY: 1
ITEM NUMBER: 7
POWER CABLE + ENCODER CABLE
JZZP-CVM09/JZSP-CVP02-05
YASKAWA 850W
QUANTITY: 1
ITEM NUMBER: 8
POWER CABLE + ENCODER CABLE
JZSP-CMM00-05 JZSP-CMP00-05
YASKAWA 750W
QUANTITY: 7
ITEM NUMBER: 9
POWER CABLE + ENCODER CABLE
JZSP-CVM30-05 JZSP-CVP02-5
YASKAWA 1.3KW, 1.8KW
QUANTITY: 2
ITEM NUMBER: 10
COMMUNICATION CABLE
JEPMC-W6002-05
QUANTITY: 12
ITEM NUMBER: 11
TERMINAL RESISTANCE
JEPMC-W6022-E
QUANTITY: 2
ITEM NUMBER: 12
TOUCH PANEL
WEINVIEW
7 INCH
QUANTITY: 1
ITEM NUMBER: 13
AIR BREAK SWITCH
LG
QUANTITY: 12
ITEM NUMBER: 14
RESIDUAL CURRENT CIRCUIT BREAKER
CHINT
QUANTITY: 1
ITEM NUMBER: 15
CONTACTOR (SWITCH)
SCHNEIDER
QUANTITY: 1
ITEM NUMBER: 16
POWER SWITCH
M&W
350W
QUANTITY: 1
ITEM NUMBER: 17
SOLID STATE RELAY (SSR)
ANV
QUANTITY: 6
ITEM NUMBER: 18
TEMPERATURE CONTROLLER
DTE10P
QUANTITY: 1
ITEM NUMBER: 19
RELAY
OMRON
QUANTITY: 4

OFFER 003
Y-12 BABY WIPES FOLDING MACHINE
PRODUCTION FLOW: UNROLLING - SLITTING FABRIC INTO LANES - FOLDING - WETTING - CUTTING – PILE & COUNTING - DELIVERING
MAIN TECHNICAL PARAMETER (SUITABLE TO WET TISSUE FOR LARGE SIZE PACKING)
PRODUCT TYPE: BABY WIPES (NON CROSS FOLDING)
PRODUCT SPEED: 200 TO 270 CUTS/MIN (SET ON PLC)
SUITABLE RAW MATERIAL: AIR LAID PAPER, SPUNLACE/HOT-ROLLING NONWOVEN FABRIC
WEIGHT OF RAW MATERIAL: 40-80G/㎡
FOLDING WAY: “Z” SHAPE (POP UP AND NON-POP UP)
CUTTING UNITE:
A. DOUBLE PAPER SHELVES
B. 10 LANES OR 12 LANES, 2 ROLLS
C. RAW MATERIAL ROLL WIDTH: 900 TO 1200mm
LENGTH OF WET TISSUE: 140 TO 185mm (SET ON PLC)
FREQUENCY OF RECEIVING PAPER: 14 TO 20 TIMES/MIN (SET ON PLC)
SIZE OF RAW MATERIAL: (1000 TO 1250) × Ø1000 (mm, W×DIA)
WET TISSUE UNFOLDED SIZE: (140 TO 185) × (150 TO 200) (mm, L×W)
WET TISSUE FOLDED SIZE: (140 TO 185) × (80 TO 110) (mm, L×W)
MATERIAL SUPPLY SYSTEM: SERVO MOTOR
CUTTING SYSTEM: CONVERTER MOTOR
PILING SYSTEM: SERVO MOTOR
POWER SUPPLY: 380V 50HZ

OFFER 004
Y-12 WET TISSUE FOLDING MACHINE
MAIN PARTS
ITEM NUMBER: 1
PLC
FX3U-32T
MITSUBISHI (JAPAN)
QUANTITY: 1
ITEM NUMBER: 2
SERVO MOTOR (CONTROL THE DISTANCE OF TISSUE
ASD-B2-2023-B, ECMA-E21320RS
3.0KW DELTA (TAIWAN)
QUANTITY: 1
ITEM NUMBER: 3
SERVO MOTOR (RECEIVING TISSUE)
ASD-B2-0721-B, ECMA-C20807RS
750W DELTA (TAIWAN)
QUANTITY: 1
ITEM NUMBER: 4
TURBINE WORM REDUCER MOTOR
WPDA120-1:10-Y100L2-4
3KW NANJING UTTON (CHINA)
QUANTITY: 1
ITEM NUMBER: 5
INVERTER
SB70G4
4KW SENLON
QUANTITY: 1
ITEM NUMBER: 6
TOUCH SCREEN
7INCH
WECON
QUANTITY: 1
ITEM NUMBER: 7
AIR SWITCH
LG
QUANTITY: 1
ITEM NUMBER: 8
SWITCHING POWER SUPPLY
S-100-24
SHANGHAI MINGWEI (CHINA)
QUANTITY: 1
ITEM NUMBER: 9
INDICATOR LIGHT
SCHNEIDER
SCHNEIDER (GERMAN)
QUANTITY: 1
ITEM NUMBER: 10
EMERGENCY STOP SWITCH
SCHNEIDER
SCHNEIDER (GERMAN)
QUANTITY: 1
ITEM NUMBER: 11
POTENTIOMETER
5KΩ
QUANTITY: 1
ITEM NUMBER: 12
ROTARY ENCODER
INCREMENTAL POLE OUTPUT
KOYO (JAPAN)
QUANTITY: 1
ITEM NUMBER: 13
RELAY
OMRON
OMRON (JAPAN)
QUANTITY: 5
ITEM NUMBER: 14
PROXIMITY SWITCH
AUTONICS
AUTONICS (KOREA)
QUANTITY: 2

Learn More

REFERENCE NUMBER: F-1432

FEATHER FILLING MACHINE MODEL SR-6

PRODUCT FEATURES

•              FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•              AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•              FILLING TIME IS 2 TO 5 SECONDS

•              NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•              CE CERTIFICATE

 

•              ITEM NO.: SR-6

•              DIMENSION: APPROX. 6400×2500×3000MM

•              VOLTAGE: 200/380415V 50/60HZ 3PHASE

•              POWER: 11KW

•              FILLING RANGE: 2-2000 G, DEPENDING ON THE MATERIAL

•              ACCURACY: ±10G

•              AIR PRESSURE: 0.5-0.8MPA

•              THERE ARE 4 WEIGHING SYSTEMS AND ONE WORKING TABLE FOR THE DOWN FEATHER FILLING LINE

•              IT IS MAINLY USED TO MAKE DOWN FEATHER QUILT

•              IT INCLUDES TWO AUTOMATIC FILLING TABLES, THE WORKING TABLE INCLUDES PNEUMATIC CLAMPING DEVICE FOR TWO FILLING PIPES, COMPOUND SHOE CLAMPING DEVICE, RING CLAMPING DEVICE AIR SUCTION, COMPRESSED AIR RING INJECTOR

•              THE FEATHER DOWN FILLING USES VACUUM METHOD STYLE HELPS KEEP THE ORIGINAL MATERIAL SOFT, ELASTIC AND HAND TACT AND AVOIDS THE FEATHER BEING DAMAGED DURING THE FILLING PROCEDURE

•              THE ACCURACY CAN BE CONTROLLED WITHIN 10 GRAMS (WEIGHING RANGE:2000 GRAMS), WHICH CAN BE ADJUSTED BY SINGLE SET OR SINGLE PIECE ACCORDING TO THE REQUIREMENTS OF DIFFERENT PRODUCTS. IT HELPS QUALITY CONTROLLING AND AVOIDS MATERIAL WASTE

•              SIMPLE OPERATION THAT SAVES LABOR COST; THE WHOLE MACHINE CAN BE HANDLED BY ONLY ONE OPERATOR.

•              KEEPS CLEAN OF THE SURROUNDING ENVIRONMENT BECAUSE ALL THE FILLING MATERIALS ARE KEPT INSIDE OF THE HOPPER

•              THE WHOLE MACHINE IS CONTROLLED BY PLC SYSTEM WITH AN ENGLISH OPERATION MENU WHEREIN 100 RECIPES CAN BE SET UP IN ADVANCE TO THE CONTROL SYSTEM. EACH RECIPE CAN BE SET UP TO ABOUT 80 SETS OF WEIGHT VALUE WHICH IS SUITABLE FOR VERY COMPLICATED PRODUCT DESIGN WITHIN ONE PIECE

•              THE AVERAGE MATERIAL MEASURING TIME IS 4 TO 6 SECONDS. THE FILLING TIME CAN BE ADJUSTED AS DESIRED SO THAT TWO FILLERS CAN BE HANDLED BY ONE OPERATOR.

•              OUR PROFESSIONAL R&D GROUP CAN DESIGN THE INDIVIDUAL FILLINGS ACCORDING TO YOUR REQUIREMENTS

 

EQUIPMENT INCLUDED:

•              FEEDING SYSTEM: 2400 x 1500 x 3300MM          1PCS

•              WEIGHING SYSTEM: 800 x 1000 x 1200MM         2PCS

•              PLC CONTROL SYSTEM & CONTROL PANEL:           1 SETS

•              BLOWER:                                                                             4PCS

•              PIPE:                                                                                      1SET

•              AUTOMATIC WORKING TABLE:                                   2SETS

•              ENGLISH EDITION ARTICLE AND VIDEO FOR OPERATION DESCRIPTION

 

Learn More

M-6054 EXTRUSION PLANT FOR FOAMED PET, WORKING WIDTH SHEETS 610mm x 240mm

OFFER 001
EXTRUSION PLANT
FOR FOAMED PET
WORKING WIDTH: SHEETS 610mm x 240mm
THICKNESS: 5mm TO 60mm
DENSITY: 80 TO 250 KG/M3
CAPACITY: UP TO 500 KG PER HOUR

OFFER 002
SILO FOR VIRGIN MATERIAL

OFFER 003
DRYING SYSTEM (SUITABLE FOR 500 KG PER HOUR)

OFFER 004
GRAVIMETRIC FEEDING SYSTEM

OFFER 005
GAS STOCKING SYSTEM

OFFER 006
GAS FEEDING SYSTEM

OFFER 007
EXTRUDER

OFFER 008
SCREEN CHANGER

OFFER 009
STRAND DYE WITH ELEMENTS FOR EXTRUSION

OFFER 010
PNEUMATIC SHAPER FOR SHAPING THE BOARD BY ADJUSTING THE LOAD

OFFER 011
HAUL OFF UNIT

OFFER 012
ROLLERS FOR BOARDS CONVEYING

OFFER 013
PULLER HAUL OFF

OFFER 014
TRANSVERSAL CUTTING UNIT

OFFER 015
FINISHING EQUIPMENT

OFFER 016
BLOCK WELDING MACHINE

OFFER 017
FINISHING PLATFORM

OFFER 018
HORIZONTAL CUTTING MACHINE

OFFER 019
SHEETS WELDING MACHINE

OFFER 020
SCRAPS RECYCLING SYSTEM

OFFER 021
GRINDER TO MILL THE PIECES OF MATERIAL

OFFER 022
COMPACTING UNIT

OFFER 023
STORING SILOS FOR DENSIFIED FOAM PET

OFFER 024
PROCESS ELECTRIC SYSTEM OF EXISTING MACHINES ACCORDING TO THE ACTUAL LAYOUT

OFFER 025
CABLES AND CABLING MATERIALS

OFFER 026
PIPING

QUANTITY: 1 PLANT

Learn More

REFERENCE NUMBER: K-4726 VACUUM MATTRESS PACKING MACHINE CONTROL PANEL MACHINE COMPLETE WITH MONITOR TOUCH SCREEN WITH ABILITY TO CUSTOMIZE FEATURES FOR PRODUCTION CONTROL, TIMER, SET RROGRAM, ETC. HYDRAULIC PRESS POWER PRESS: 100 TONS INCREASE WORKING HEIGHT: 2200mm X 2200mm X 405mm 600mm ELECTRIC HOIST FOR LOADING ROLLS WITH A CAPACITY OF 250 KGS OR 500 KGS TRANSFER 220 D: BLOCK PLACED AFTER THE HYDRAULIC PRESS TO MAKE A PACKAGE OF DOUBLE MATTRESS WITH 2 COILS ADDITIONAL POSSIBLE TO INSERT PIECES OF POLYETHYLENE PACKAGING OTHER THAN THE FIRST. REEL DIAMETER VARIABLE CASTLE OUTPUT FROM 280mm TO 500mm. VARIABLE DIAMETER REEL WITH PLUS-FUNCTION AUTOMATIC: DUAL EXHAUST, SIDE OR REAR, WITH AUTOMATIC MATTRESS PACKAGING AND UNLOADING TRUCKS. MODEM PROVIDES FOR FULL CONTROL BY TELECARE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: E-9990 COMPUTERIZED PILLOW FILLING MACHINE - NEW MODEL: 003-PF WITH OPENING SECTION DIMENSIONS: 5000 X 5000 X 1400mm (16.4 FEET X 16.4 FEET X 55 INCHES) EQUIPMENT: FIBER OPENER 1 PCS; FAN 1 PCS; FILLING LOT 2 SET; PLC CONTROL SYSTEM 1 PCS VOLTAGE: AS PER CUSTOMER'S REQUEST CAPACITY: 150-180KG/H (300 TO 400 LBS/HR) FIBER OPENING RATE: MORE THAN 98% AND NOT BE DAMAGED WEIGHT: 690KG (1500 LBS) PLC (COMPUTER) CONTROL SYSTEM QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-9001 COMPUTERIZED DOWN AND FEATHER FILLING MACHINE DIMENSION: APPROX. 6400 x 2500 x 3000mm VOLTAGE: AS PER CUSTOMER'S NEEDS POWER: 6kw AIR PRESSURE: 0.5-0.8mpa QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5222 (131332SBNK12UF) L EH-WHA PLATINUM OIL STENTER YEAR 2008 WIDTH 3400mm USED EH-WHA OIL STENTER YEAR 2008 MODEL PLATINUM 10 CHAMBERS QUANTITY AVAILABLE: 1 Learn More

•ITEM NO.: F-2 •DIMENSION: APPROX. 11000*2500*3000MM •VOLTAGE: 380V 50HZ 3PHASE •POWER: 11KW •FILLING RANGE: 2-100 G, DEPENDING ON THE MATERIAL •ACCURACY: ±1G •AIR PRESSURE: 0.5-0.8MPA •THERE ARE 4 WEIGHING SYSTEM AND 2 WORKING TABLE ASSEMBLED TO THE DOWN FEATHER FILLING LINE •IT IS MAINLY USED TO MAKE DOWN FEATHER QUILTING Learn More

(1) MARSHALL AND WILLIAMS TENTER FRAME-100” FABRIC-4 ZONES-CLIP (1) KUSTER PAD (1) MAHLO WEFT STRAIGHTENER (1) SALVAGE EDGE TRIMMER MACHINE (HOME MADE-NO BRAND) (1) A-FRAME WINDER Learn More