Search results for: 'Auto+8'

REFERENCE NUMBER:  G-3653

AUTOMATIC POCKET SPRING PRODUCTION LINE

 

MODEL 08PA AUTOMATIC POCKET SPRING PRODUCTION LINE

MAIN PARAMETER:

 

PART OF MACHINE: SL-08P+SL-08A

DIMENSIONS(L×W×H): 9.75×1.4×1.85M (EXCEPT THE WORKTABLE)

COIL SHAPE: CYLINDRICAL OR BARREL 

SPRING DIAMETER: TOP & BOTTOM Φ45-60Mmm CENTER Φ60-80mm

SPRING HEIGHT (INSIDE THE NON-WOVEN): 130 TO 180mm

STEEL WIRE DIAMETER: Φ1.8 TO Φ2.2Mmm

POCKETED WIDTH OF NON-WOVEN FABRIC: 410 TO 520mm

TYPE OF SEALING: ULTRASONIC

PRODUCTION: 65 PCS/MINUTE

POWER REQUIREMENT: 21 KW

COMPRESSED AIR PRESSURE: 6KGS/CM³

WEIGHT: APPROX. 3.3 TONS

Learn More

REFERENCE NUMBER: K-8416

G1 TONELLO 330 "CENTRIFUGING" INDUSTRIAL WASHING MACHINE-USED

 

G1 TONELLO 330

“CENTRIFUGING” INDUSTRIAL WASHING MACHINE

FRONTAL TYPE

FOR CHEMICAL “STONE WASH”

CAPACITY LIT. 3.300

MOD. TONELLO G1 330

GENERAL DESCRIPTION:

TONELLO G1 IS A MACHINE WITH HIGH-SPEED HYDRO-EXTRACTION (600 R.P.M.) AND IT IS EQUIPPED WITH AUTOMATIC SELF-BALANCING SYSTEM

TONELLO G1 IS SUPPLIED WITH “SETTABLE INVERTER”

ROTATION SPEED FROM 0 TO 55 R.P.M

ALSO SETTING THE CENTRIFUGING SPEED FROM 0 TO 600 R.P.M.

WITH TIME OF CENTRIFUGE PROGRAMMABLE BY INDUSTRIAL PC

THE ACCESS MAIN DOOR TO THE DRUM IS VERY WIDE, IN ORDER TO EASY GARMENTS LOADING AND UNLOADING OPERATION

OPENING AND CLOSING ARE PNEUMATIC

DOUBLE TILTING SYSTEM FOR GARMENTS LOADING AND UNLOADING

DRIVING SYSTEM IS SITUATED ON THE UPPER PART OF THE MACHINE

WITH PROPER MATERIAL AND MOTORS SUITABLE TO WORK AT LOW AND HIGH R.P.M.

1 TANK FOR THE PREPARATION OF AUXILIARY PRODUCTS WITH CAPACITY OF LITTERS 180 EQUIPPED WITH ELECTRO-PUMP AND PNEUMATIC VALVES FOR THE SENT ONE

THE DRAINAGE IN DRAIN AND AUTOMATIC RINSES N° 2 WATER INLETS COMPLETE WITH PNEUMATIC VALVE- MECHANICAL WATER-COUNTER DIRECT HEATING AND COOLING SYSTEM

AUTOMATION WITH MICROPROCESSOR

 

TECHNICAL DATA TONELLO G1 330

DRUM DIMESION                           

-DRUM HOLING SHEET                                   mm                        4

THICKNESS         

-DIAMETER                                                   MM                       1900

-DEPTH                                                        MM                       1150

-VOLUME                                                      LT.                       3300

-DOOR DIAMETER                                           MM                       1020

-MAXIMUM LOADING                                        KG.                      120/130

CAPACITY           

BASKET SPIN SPEED                                        RPM                      0-600

DIRECT STEAM CONNECTION                               Ø                        1" 1/4

WATER INLET CONNECTION                                 Ø                        2 x 2

COMPRESSED AIR INLET                                     Ø                        1/4"

CONNECTION   

STEAM IN MAXIMUM PRESSUREBAR                      BAR                       6

WATER IN MAXIMUM PRESSURE                           BAR                       4

COMPRESSED AIR IN MAXIMUM                           BAR                       8

PRESSURE          

POWER INSTALLED                                           KW                        22

3-PHASE VOLTAGE                                           VOLT/HZ                 400/50

PRODUCTS TANK Ø 240 H 400                             LT.                         80

TANK RINSING VALVE                                         Ø                         1/2"

MACHINE SIZE                  

-WIDTH                                                          MM                        2500

-WIDTH WITH ELECTRICAL PANEL                         MM                        2980

-DEPTH                                                           MM                        2710

-HEIGHT                                                          MM                        3000

Learn More

REFERENCE NUMBER: P-4328

FLAT TYPE WET WIPES

 

Model: WL-F
Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface: 8" LCD touch screen
Packing style: Double end seal & rotary type
Frequency division detection: nonwoven ,film detect respectively
Automatic correction: material EPC& film EPC
Auto splicing: raw material & film automatic splicing
Moisture type: quantitative moisture
SUS Agitate tank: 600L stainless steel agitate tank
Liquid level control: electronic detect control automatically

Specifications
Raw material: spunlaced nonwoven, airlaid paper etc.
Raw material specification: max W250mm, φ1100mm
Axis QTY setting:2  rolls raw material, auto splicing without stopping
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP CPP PET/PE PET/AL etc. heat-seal material
Packing Film specification: max W280mm, φ350mm
Axis QTY setting:2 sets film, automatic splicing without stopping machine
Diameter of ventilating shaft: 3"
Folding type: V、W fold
Wet wipes size: L60-110mm W35-80mm
Open size: L120-220mm W120-250mm
Package size: L90-180mm W40-90mm
Production speed: 300-400bags/min, design 450 bags/min
Machine space: L5500mm W1250mm H1830mm
Power: AC 380V 50/60Hz 8KW
Compressed air: 0.6-0.8Mpa 100L/min
Machine net weight : 2000kg

Option equipment: Production counting machine Coding machine

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-4323

WET WIPES PRODUCTION LINE

 

Model WL100

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface:  LCD touch screen
Packing style: end seal & reciprocating type
Frequency division detection: nonwoven, film, label detect respectively
Auto splicing: film automatic bonding, label automatic switching
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 12 fluid pipes spray independently
SUS Agitate tank: 2 sets, 600L stainless steel agitate tank
Liquid level control: electronic detection, auto control
 
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W350mm, φ1400mm
Axis QTY settings:12 rolls raw materials,12 electronic eyes detect online
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic bonding without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding  type: single extraction & interfold type
Wet wipes size:L120-220mm  W90-115mm
Open size: L120-220mm W150-330mm
Package size: L150-300mm W80-120mm H10-80mm
Design speed: 120bags/min &250cutting/min
Production speed: 50 bags/min &4000 pieces/min
Machine space: L16000mm W2500mm H2100mm
Power: AC 380V 50/60Hz 18KW
Compressed air: 0.6-0.8Mpa 250L/min
Machine net weight :10000kg

Option equipment: Coding machine Metal detector 

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-4329
CANISTER WET WIPES MACHINE

 

Model: R120
Machine Characteristic:
Control system: Programmable controller(PLC)
Drive element: servo motor
Operate interface: LCD touch screen
Roll mandrel extraction: Automatically
Nonwoven head: Automatically

Specifications:
Suitable material: nonwovens
Material weight: 15-70g/m2
Material axis: 76.2mm
Control mode: servo motor
Rewinding speed: 100m/min
Raw  material width: Max 1600mm
Raw material diameter: Max 1200mm
Perforation material: SUS circular knife
Perforation mode: synchronous  rotary-cut
Perforation distance: 100-300mm
Batching control: servo motor
Slitting control: servo motor
Small roll diameter: Max 145mm
Operate interface:8" LCD touch screen
Power: AC380V  50/60Hz   8KW
Machine space:  L3600mm  W4100mm  H2100mm
Compressed  air: 0.6-0.8Mpa   350L/min
Machine net  weight: 3000kg

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-3350

RIETER K45 RING SPINNING FRAMES LINKED WITH MURATA 21C WINDERS- YEAR 2008 TO 2009

 

RIETER COMPACT RING SPINNING FRAMES MOD. K45

YEAR: 2008/09

NUMBER OF SPINDLES: 1632

SPINDLE GAUGE: 70mm

RING TUBE LENGTH: 200mm

SPINDLE WHARVE DIAMETER: 18mm

DRAFTING SYSTEM: RIETER

RING DIAMETER: 40mm

OHTC: CHINESE

CREEL: NR. 6 ROWS

MAIN MOTOR: 80KW

SUCTION MOTOR: 15KW

SUCTION: INDIVIDUAL

WASTE COLLECTION: MANUAL

DOFFER: AUTO DOFFER LINKED

BOTTOM ROLLER: 27mm

QUANTITY: 6

 

LINKED TO:

MURATA CONE WINDERS MOD. 21C

YEAR : 2008

NUMBER OF DRUMS: 34

YARN CLEARER: USTER QUANTUM 2 WITH FOREIGN FIBER SENSOR

MEASURING HEAD: MK C15 F23

MACHINE HAND: 3 X LH, 3 X RH

SPLICER: G 2Z

WAXING: AVAILABLE

SUCTION: INDIVIDUAL

OHTC: AVAILABLE

PACKAGE CONVEYER BELT: AVAILABLE

DOFFER: AUTO

QUANTITY: 6

Learn More

REFERENCE NUMBER: M-6093
COTTON SWAB AUTOMATIC PRODUCTION AND PACKING EQUIPMENT – Q-TIPS

IT AUTOMATICALLY MAKES DOUBLE TIP OR SINGLE TIP COTTON SWABS, AND SIMULTANEOUSLY DRIES THE COTTON SWABS ON THE SYNCHRONIZED DRYING AND LINE, AND FINALLY PACKS COTTON SWABS INTO PLASTIC BAGS, ROUND BOX, OR SQUARE BOX WITH DIFFERENT QUANTITY (NORMAL 100 TO 300 PIECES PER PLASTIC BAG, ROUND BOX, OR SQUARE BOX).

MATERIAL OF STICK: PLASTIC, PAPER, WOOD, OR BAMBOO
MAKING AND PACKING SPEED: 1,000 TO 1,100 PCS PER MINUTE DEPENDING ON THE TYPE OF STICK

Learn More

C-3707 TEKMA/GDM - ADULT DIAPERS PRODUCTION LINE IFP-AD, YEAR 1997

TEKMA/GDM
ADULT DIAPERS PRODUCTION LINE
MODEL: IFP-AD
YEAR: 1997

QUANTITY: 1

Learn More

REFERENCE NUMBER: K-8816 (99035MNH8UX) RIETER RSB D35 DRAWFRAME YEAR 2002 TYPE: AUTO LEVLER YEAR: 2002 EL: 3P/400V/50HZ MODEL: RSB D35 AUTOCAN CAN CHANGER AUTO LEVELLER CAN SIZE: 20” X 42”' RUNNING CONDITION QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: V-1065 AUTOMATIC CUTTING MACHINE (NEW) HEAVY DUTY HORIZONTAL CUTTING MACHINE FOR 14 LB (225 KG/CUBIC METER) FOAM MODEL SRM-P-1200 1067mm WIDE (42 INCHES) 2032mm LONG (80 INCHES) 560mm TALL (22 INCHES) THE MATERIAL IS 225 KGS PER CUBIC METER DENSITY (14 LBS/CUBIC FOOT) QUANTITY AVAILABLE: 1 Learn More