Search results for: 'Oil we'

R-4148 CATERPILLAR 928G WHEEL LOADER, YEAR 2003, WITH 9683 HOURS

CATERPILLAR 928G WHEEL LOADER
YEAR: 2003
HOURS: 9,683
TRANSMISSION PULLS AND SHIFTS IN ALL GEARS
STRONG HYDRAULICS
NO FUEL OR OIL LEAKS

QUANTITY: 1

Learn More

R-1321 KUSTER CONTINUOUS OPEN WIDTH MERCERIZING, ROLLER SURFACE WIDTH 2000mm

DETAILS:
KUSTER CONTINUOUS OPEN WIDTH MERCERIZING
FOR THE PRETRATMENT OF WOVEN FABRICS
WIDTH OF FABRIC (WB): 960 TO 1800mm
ROLLER SURFACE WIDTH: 2000mm
DRIVE SIDE: LEFT SIDE
OPERATING SIDE: FAR SIDE
PRODUCTION SPEED: 60 M/MIN
TECHNICAL SPEED: 80 M/MIN
WATER PRESSURE: 2.0 + 0.5 BAR CONSTANT TO BE PROVIDED LOCALTY
VAPOUR PRESSURE: 3.0 + 0.5 BAR WET STEAM TO BE PROVIDED LOCALTY
AS PRESSURE (FREE OF OIL AND WATER): 7 BAR, TO BE PROVIDED LOCALTY
TYPE OF FABRICS: WOVEN FABRICS
QUALITY OF FABRICS: COTTON, BLENDS, VOISE (DRY)
FABRIC WEIGHT: 65 TO 300 G/M
HIGH-EFFICIENCY PADDER TYPE 222.50 LINE FORCB: 50 N/mm (50KP/CM)
HIGH-EFFICIENCY PADDER TYPE 824.27 LINE FORCE MAX: 50 N/mm
HIGH-EFFICIENCY PADDER TYPE 824.22 LINE FORCE MAX: 50 N/mm
MAANDER TYPE 834.43 FABRICS CONTENT: 15 m
SQUEEZER TYPE 225.65 LINE FORCB: 10 N/mm
MAANDER TYPE 834.43 FABRICS CONTENT: 15 m
SQUEEZER TYPE 225.65 LINE FORCB: 10 N/mm
STILL RUNNING IN MILLS

QUANTITY: 1

Learn More

H-1159 KUSTERS CONTINUOUS OPEN WIDTH MERCERIZING RANGE 1800mm

WIDTH OF FABRIC: 960mm TO 1800mm
ROLLER SURFACE WIDTH: 2000mm
DRIVE SIDE: LEFT SIDE
OPERATING SIDE: FAR SIDE
PRODUCTION SPEED: 60 METERS PER MINUTE
TECHNICAL SPEED: 80 METERS PER MINUTE
WATER PRESSURE: 2.0 ± 0.5 BAR CONSTANT, TO BE PROVIDED LOCALLY
VAPOR PRESSURE: 3.0 ± 0.5 BAR WET STEAM, TO BE PROVIDED LOCALLY
AIR PRESSURE (FREE OF OIL AND WATER): 7 BAR, TO BE PROVIDED LOCALLY
TYPES OF FABRICS: WOVEN
QUALITY OF FABRIC: COTTON, BLENDS, VOILE (DRY)
FABRIC WEITER: 65 TO 300 GRAMS PER SQUARE METER

HIGH-EFFICIENCY PADDER TYPE 222.50
LINE FORCE: 50 N/mm (50 kp/cm)

HIGH-EFFICIENCY PADDER TYPE 824.27
LINE FORCE (MAX.): 50 N/mm

HIGH-EFFICIENCY PADDER TYPE 824.22
LINE FORCE (MAX.): 50 N/mm

MAANDER TYPE 834.43
FABRIC CONTENT: 15 METERS

SQUEEZER TYPE 225.65
LINE FORCE: 10 N/mm

MAANDER TYPE 834.43
FABRIC CONTENT: 15 METERS

SQUEEZER TYPE 225.65
LINE FORCE: 10 N/mm

QUANTITY: 1

Learn More

P-5080 TRABATTONI ROASTER 30 KILOS

LECCO BATTONI 30 KILO ROASTER. USUALLY THE CONTROL SYSTEM IS PLACED ON THE LEFT IF YOU STAND AND LOOK AT THE FRONT. BUT YOU MAY CHOOSE TO HAVEIT PUT ON THE RIGHT SIDE. YOUR CHOICE!
THE ON-BOARD FURNACE IS LINED WITH REFRACTORY BRICK – SO HEAT STAYS IN THE COFFEE ROASTING CHAMBER AND NOT IN YOUR ROOM. CHAFF COLLECTOR, PNEUMATIC LOADER, AND MANUAL OPERATED ELECTRICAL PANEL ARE ALL INCLUDED. STONER NOT INCLUDED. SPECIAL NOTE: THE INDIRECT HEATING IS COUPLED WITH THE COOPERATION OF THE DOUBLE WALLED ROASTING DRUM. THEREFORE, THERE IS COMPLETE SEPARATION BETWEEN THE COFFEE BEANS AND FLAME OF THE HEAT GENERATING METHOD. MANUFACTURER WILL CUSTOM BUILD THE SIZE OF THE DESTONER AS WELL AS THE SUCTION AIR ADJUSTMENTS! CRATING INCLUDED IN PRICE.

FEATURES:
52 INCHES WIDE X 105 INCHES DEEP X 95 INCHES TALL ALL PIPE DUCT 8 INCHES. YOU CHOOSE ELECTRIC IN 220 VLT HEATING: 40,000 KCAL/H FROM GAS, PROPANE, OIL, OR WOOD PRODUCTION KG/H.C.A.: 90-120 KH

QUANTITY: 1

Learn More

P-5046 TRABATTONI ROASTER 10 KILOS

TRABATTONI
ROASTER
10 KILOS
BEST MACHINE FOR WHOLESALE/RETAIL WITH A "SALES" APPEAL! THE COOLING BIN ON THE FRONT IS DOUBLE SIZED TO PROVIDE ROOM FOR BOTH MIXING AND BLENDING. THIS IS A RUGGED SOLID TRADITIONAL APPROACH TO ROASTING WITH AN IMAGE. BUILT FROM CAST IRON BASE AND FOUNDATION - THIS DOUBLE WALL DRUM ROASTER CAN BE BUILT IN GAS, PROPANE OR EVEN WOOD FIRED. IF WOOD FIRED, THEN THE ELECTRICAL PANEL WILL BE MOVED. THE CHAFF COLLECTOR CONNECTS IN ANY POSITIONS TO THE REAR OF THE MACHINE. COMES IN RED COLOR UNLESS OTHERWISE SPECIFIED. CUSTOMIZED DESTONER SIZE OPTION AS WELL AS THE AIR
SUCTION ADJUSTMENTS. CRATING INCLUDED IN THE PRICE.

FEATURES:
DIMENSION: 42" WIDE X 69" DEEP X 67"TALL & 24" CHAFF NET WEIGHT: 1,450 POUNDS EXHAUST TUBE TO OUTSIDE: 6" COOLING TUBE: 6" ELECTRIC POWER REQUIRED: 1.1 KW HEATING: 14,000 KCAL/H WITH GAS, PROPANE, OIL, OR WOOD FIRED WOOD FIRED UNITS AVAILABLE - PLEASE CALL FOR PRICE. STAINLESS STEEL CHAFF COLLECTOR IN REAR- ALLOW 24" SPACE

QUANTITY: 1

Learn More

P-3516 BALEMASTER AUTO-TIE BALER WITH PAPER SHREDDER AND LOADING CONVEYOR YEAR 1989

BALEMASTER
AUTO-TIE BALER WITH PAPER SHREDDER AND LOADING CONVEYOR
YEAR: 1989
6’ WIDE x 32’ LONG INCLINED LOADING BELT CONVEYOR:
ORIGINAL INSTALLATION:
THE ENTRANCE WAS BELOW FLOOR LEVEL ALLOWING FLOOR LEVEL, PUSH-TYPE LOADING. PRODUCT THEN FALLS ONTO A SHORT SECTION OF SHREDDER FEEDING CONVEYOR
EQUIPPED WITH:
24 INCHES HIGH SIDE GUIDES
AUTO BELT TRACKING

BALEMASTER
SERIES 1350J-62 PAPER SHREDDER
62 INCHES WIDE
SPECIFICATIONS:
MOUNTED TO TOP OF BALER FEED CHUTE
WAS USED FOR MAGAZINE EDGE TRIM & NEWSPAPER, BUT CAN BE USED FOR OTHER MATERIALS

BALEMASTER
MODEL: 4025C-8
AUTO TIE BALER
YEAR: 1989
SPECIFICATIONS:
MATERIALS: NEWSPRINT, MAGAZINES, CORRUGATED CHIPBOARD, FIBERBOARD, BOXBOARD
BALESIZE: 28 INCHES W x 36-1/2 INCHES H x UP TO 84 INCHES LONG
BALE WEIGHT: 1,440 POUNDS @ 72 INCHES LONG
OPENING SIZE: 17 INCHES x 32 INCHES
BALER HEIGHT: 48 INCHES
BALER HEIGHT WITH CHUTE: 72 INCHES
CYLINDER DIAMETER: 8 INCHES
THRUST: 150,900 POUNDS @ 3,000 PSI
NUMBER OF WIRE REELS: 5 @ 100 POUNDS EACH
(10) AUTO TWISTER HOOKS, (5) CUTTERS PER SIDE

EQUIPPED WITH:
AIR COOLED HYDRAULIC OIL COOLER FOR CONTINUOUS OPERATION WITH ITS OWN MOTOR & PUMP WATER SPRAY SYSTEM
(2) 5’ LONG BALE TAKE-AWAY TABLES

MOTOR DATA: 25 HP BALER, 230/460/60/3

NOTE: INSTALLATION ASSISTANCE AVAILABLE

QUANTITY: 1

Learn More

K-3429 FOSTER AND WHEELER STEAM BOILERS A 100 T/ H AND 46.4 BAR YEAR 2005

MAKE: FOSTER AND WHEELER
YEAR 2005
2 X 100 TONS/H, 39 BAR WORKING PRESSURE AT 385C. DESIGNED PRESSURE IS 46.5 BAR
EMPTY WEIGHT 97 TONS
FURNACE VOLUME 104M3
HEATING FURNACE AREA 1125M2
ALL ACCESORIES INCLUDED
87% EFFICIENCY, FUEL OIL AND NATURAL GAS FIRED

QUANTITY: 2

Learn More

REFERENCE NUMBER: M-6042 (880699GY7RX) L
VACUUM PRESSING AND ROLLING UP MATTRESSES LINE

COMPLETE LINE FOR VACUUM PRESSING AND ROLLING UP MATTRESSES
PRODUCTION: 3 MATTRESSES PER MINUTE
CAN WORK: VISCO / POLYURETHANE / LATEX / BONNELL SPRING / POCKET SPRING / ETC.

QUANTITY: 1

Learn More

REFERENCE NUMBER: X-0007 SPECIAL SEWING MACHINE FOR CLOSING PILLOWS AND CUSHIONS THIS MACHINE IS SPECIFIC FOR THE SEWING OF ANY KIND OF SYNTHETIC FIBRES AND FOAM, RESIN OR SIMILAR IN ANY THICKNESS AND WEIGHT USED TO COVER THE WOODEN FRAME QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-0713 MONFORT STENTER MACHINE YEAR 2005 WIDTH 3200mm MONFORT STENTER MACHINE YEAR 2005 ROLLER WIDTH 3400mm WORKING WIDTH 3200mm TYPE HORIZONTAL PIN CLIP CHAIN ENTRY 3MT 8 CHAMBER HEAT OF SOURCES THERMO OIL ENTRY J SCRAY PADER MANGLE 2 BOWL MAHLO WEFTSTRAIGHTNER ENTRY AND EXIT ARTHOMET CONTROL MACHINE WITH EVAKE SYSTEM OVER FEEDING BRUSHING TWIN EAT HEAT COMBURSHAN SYSTEM MACHINE EXIT SIDE J.SCRAY FOLDER BOOK BATCHER SYSTEM QUANTITY AVAILABLE: 1 Learn More