Search results for: 'A-250'

REFERENCE NUMBER: M-4255 (101095MAN9R) K SANTEX OVEN YEAR 1992 WIDTH 2500mm - GAS SECOND HAND SANTEX OVEN WIDTH 2500mm YEAR 1992 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5251 (1313725BK12RX) L DILO SNO 25 LOOP NEEDLE LOOM YEAR 1971 WIDTH 2500mm DILO LOOP NEEDLE LOOM MAKE: DILO TYPE: SNO 25 YEAR: 1971 WORKING WIDTH: 2500mm NEEDLES: CA. 3,000 NEEDLES NEEDLING: SINGLE BOARD DOWN LAMELLA GAUGE: 3.5mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5003 (1212FJWLHH11) L FIBER OPENING MACHINES DIFFERENT KINDS OF FIBER OPENING MACHINES – CAPACITY 220KG/H, 250KG/H, 300KG/H, 400 KG/H, 550KG/H. THE FIBER OPENING MACHINE IS ALSO CALLED AN OPENER – MAINLY SUITABLE FOR OPENING COTTON, POLYESTER STAPLE FIBER, WOOL, POLYESTER WADDING, AND SCRAP MATERIALS WITHIN 64mm. ALL THE WORK ROLLERS GO THROUGH DYNAMIC BALANCE PROCESSING, NO VIBRATION AND LOW NOISE IN THE OPERATION. TO USE THE FORCE GENERATED BY LONG FINE-TOOTH AND MULTI-TOOTH ROLLER’S REVERSE OPERATION STRENGTHENS THE LOOSENING ACTION, MAKING FIBER COTTON OR STAPLE FILAMENT OPEN TO BEST EFFECT. THE POWER DISTRIBUTION, IN ACCORDANCE WITH INTERNATIONAL ELECTRIC TECHNICAL STANDARD, COMPLIES WITH SAFETY STANDARDS OF AUSTRALIA, EU, AND NORTH AMERICA (MODEL 001) FIBER OPENING MACHINE CAPACITY: 250KG/H DIMENSION: 1350mm x 1220mm x 950mm WEIGHT: 550KG (MODEL 002) FIBER OPENING MACHINE CAPACITY: 280KG/H DIMENSION: 1800mm x 1220mm x 1050mm WEIGHT: 750KG (MODEL 003) FIBER OPENING MACHINE CAPACITY: 300KG/H DIMENSION: 3350mm x 1500mm x 1350mm WEIGHT: 1480KG (MODEL 004) FIBER OPENING MACHINE CAPACITY: 400KG/H DIMENSION: 2000mm x 1350mm x 1150mm WEIGHT: 1100KG (MODEL 005) FIBER OPENING MACHINE CAPACITY: 550KG/H DIMENSION: 2350mm x 1500mm x 1350mm WEIGHT: 1400KG QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5005 (1212WAJWHH11) L BALL FIBER MACHINE 300KG/H, 600KG/H CAN STILL CHANGE THE CAPACITY OF THIS MACHINE ACCORDING TO REQUIREMENTS OPERATION OF THE PRODUCTION LINE IS VERY SIMPLE: PUT THE FIBER OR THE COTTON ON THE OPENING MACHINE, THEN VIA THE OPENING MACHINE, CAN MAKE THE COTTON AND FIBER LOOSER (MORE OPEN) THAN BEFORE. THE BLOWER IS CONNECTED BETWEEN THE OPENING MACHINE AND THE BALL FIBER MACHINE IN ORDER TO SEND THE FIBER INTO THE BALL FIBER MACHINE. THE BALL FIBER MACHINE MAKES THE FIBER INTO FIBER BALL. ADVANTAGE OF THIS MACHINE: THIS MACHINE CAN SAVE ON THE COST OF LABOR. TWO BALL FIBER MACHINES CAN BE HANDLED BY ONE OPERATOR THAT CAN OPERATE THE OPENING MACHINE AND BALL FIBER MACHINE. THE POWER, 36.85KW/H. SMALL WORKING AREA, JUST NEED 5500mm x 3500mm x 2300mm (MODEL 002) BALL FIBER MACHINE USING RANGE: PILLOW, JACKET, QUILT PRODUCTIVITY: 160 TO 250KG/H (IF INCLUDING OPENING MACHINE, THE PRODUCTIVITY CAN BE UP TO 300KG/H) POWER: 17.75KW VOLTAGE: AS PER CUSTOMER REQUIREMENT WEIGHT: 1450KG DIMENSION OF BOX: 2500mm x 900mm x 1300mm (PACKAGING OPENING MACHINE AND DISTRIBUTION BOX) 2400mm x 1150mm x 1300mm (BALL FIBER MACHINE) TWO WOODEN CASES SHIPPING DIMENSION: 4500mm x 3500mm x 1500mm AN OPENING MACHINE, A BALL FIBER MACHINE, AND A BLOWER (MODEL 003) BALL FIBER MACHINE USING RANGE: PILLOW, JACKET, QUILT PRODUCTIVITY: 300 TO 400KG/H (PRODUCTIVITY CAN BE UP TO 600KG/H) POWER: 36.85KW VOLTAGE: AS PER CUSTOMER REQUIREMENT WEIGHT: 2300KG DIMENSION OF BOX: 2500mm x 900mm x 1300mm (OPENING MACHINE AND DISTRIBUTION MACHINE) 2400mm x 1150mm x 1300mm (BALL FIBER MACHINE) 2400mm x 1150mm x 1300mm (BALL FIBER MACHINE) THREE WOODEN CASES SHIPPING DIMENSION: 5500mm x 3500mm x 2300mm AN OPENING MACHINE, TWO BALL FIBER MACHINES, AND TWO BLOWERS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-8843 MAGETRON MITHO 2002 YEAR 2000 AUTOMATIC SEWING MACHINE MAGETRON MODEL: MITHO 2002 YEAR: 2003 DOUBLE ENTERING SINGLE ENTERING: MINIMUM WIDTH: 300mm; MAXIUM WIDTH: 1800mm MINIMUM LENGTH: 300mm; MAXIMUM LENGTH: 2500mm DOUBLE ENTERING: MINIMUM WIDTH: 300mm; MAXIMUM WIDTH: 850mm MINIMUM LENGTH: 300mm; MAXIMUM LENGTH: 2500mm NOWADAYS, THE MACHINE IS WORKING YOU CAN INSPECT THE MACHINE WHEN YOU WISH QUANTITY: 1 Learn More

REFERENCE NUMBER: M-1804 (770685GH7RX) DILO OD IV 25-FOUR BOARD DOWN STROKE NEEDLE LOOM-2500mm-YEAR 1983 MAKE: DILO MODEL: DILO OD IV 25 WORKING WIDTH 2500mm YEAR 1983 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1177 (1212139G11RF) A FAMIT ECO DYEING MACHINE, YEAR 1997, CAPACITY 250kg FAMIT ECO DYEING MACHINE YEAR 1997 CAPACITY 250KG MAX TEMP: 108˚C QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4787 (1111BGJWXX10) L BLACK CLAWSON EXTRUSION COATER LAMINATOR YEAR 1992 WEB WIDTH 1575mm BLACK CLAWSON EXTRUSION COATER LAMINATOR YEAR 1992 WEB WIDTH 1575mm (62 INCHES) L/D(S): 30:1 DRIVE SYSTEM: 250HP DC DRIVE SPEED: 305 MPM (1000 FPM) EXTRUDER(S): BLACK CLAWSON PRIME COATER: NONE SIZE(S): 4-1/2” PRIMARY UNWIND: NONE SECONDARY UNWIND: NONE REWIND: NONE DRYER TYPE: NONE EQUIPPED WITH MODEL 111 EXTRUSION COATER WITH 30” DIAMETER X 72” FACE CHILL ROLL PRESSURE ROLL ASSEMBLY WITH 12” DIAMETER, 6” DIAMETER NIP ROLL AND LEAD-IN SPREADER ROLL 11” DIAMETER SECONDARY CHILL ROLL; SLITTING STATION MODEL 400 EXTRUDER MOUNTED ON XYZ CARRIAGE WITH 250HP DC MOTOR 4-1/2” DIAMETER SCREW IS ELECTRICALLY HEATED AND WATER COOLED; VALVED ADAPTER 72” CLOEREN AUTOMATIC DYE WITH EDGE BEAD REDUCTION AND EXHAUST HOOD QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4510 (111185PKL10U) D 800 HP CLEAVER BROOK’S BOILER 1996 MODEL: CB-200-800-250 YEAR: 1996 HP: 800 2658500 BTU/HR VOLTS: 460/3/60 NATURAL GAS MAX W.P. PSI: 250 QUANTITY AVAILABLE: 1 Learn More

BRUCKNER BOPP EXTRUSION LINE, WIDTH 8200mm, THREE LAYERS, BUILT 1992, COMPLETED WITH AN ATLAS SLITTER/REWINDER, MODEL CW, WIDTH 8200mm. AND FURTHER AUXILIARIES, INCLUDING SPARE PARTS. NAMEPLATE CAPACITY 20,000 T/Y. RAW MATERIALS SECTION - 4 SILOS 250 M3 ALUMINIUM - 2 SILOS 100 M3 ALUMINIUM - 2 SILOS 50 M3 ALUMINIUM - PNEUMATIC TRANSPORT SYSTEM; COMPUTERIZED DOSING SYSTEM, HOPPERS AND SCALES FOR THE THREE EXTRUDERS EXTRUSION SECTION - MAIN EXTRUDERS: 2 MITSUBISHI CASCADE EXTRUDERS Ø 300 mm AND 250 mm - CO-EXTRUDERS: 2 BANDERA EXTRUDERS Ø 100 mm, EQUIPPED WITH MELT PIPES - DIE: SIMPLAST, WIDTH 1,140 mm, GAP 2 - 3.75 mm, 40 PUSH/PULL BOLTS - CHILL ROLL: Ø 3 M, 1,900,000 KJ/H COOLING CAPACITY - WATER BATH: 1.500.000 KJ/H CAPACITY MDO (MACHINE DIRECTION ORIENTATION) SECTION - PREHEATING INFRARED 130 KW - PREHEATING: 16 CHROMIUM PLATED ROLLS Ø 614 mm - STRETCHING: 6 CHROMIUM PLATED ROLLS Ø 180 mm, EQUIPPED WITH RUBBER NIP ROLLS Ø 150 mm - ANNEALING: 2 CHROMIUM PLATED ROLLS Ø 614 mm TDO (TRANSVERSE DIRECTION ORIENTATION) SECTION - TOTAL LENGTH: 66 METER - PREHEATING: 5 SECTIONS - STRETCHING : 5 SECTIONS - ANNEALING : 5 SECTIONS - NEUTRAL : 1 SECTION - COOLING : 2 SECTIONS - INLET 850 – 1,050 mm WIDTH - OUTLET 7,600 – 8,600 mm WIDTH PRS (PULL ROLL STAND) SECTION - EDGE TRIM CUTTERS - ESSECI FLAME TREATER, BURNER, CHROMIUM PLATE ROLL, RUBBER NIP ROLL - CORONA TREATER 1: 3 DISCHARGE BARS, SILICON ROLL, RUBBER NIP ROLL - CORONA TREATER 2: 2 DISCHARGE BARS, EDGE BAR, SILICON ROLL, RUNNER NIP ROLL MEASUREX/HONEYWELL GAUGE CONTROL SYSTEMS - 8.5 M SCANNER FOR FILM - 1.2 M SCANNER FOR CAST SHEET - MAIN THICKNESS CONTROL UNIT CONNECTED TO THE BOLT OF THE EXTRUSION DIE FOR LIP ADJUSTMENT WINDER - 2 TURRETS KAMPF WINDER - AUTOMATIC CUT / TURRET / MILL-ROLL CHANGE - WINDING CORES: 108 STEEL WINDING CORES Ø 500 mm CONTROL UNIT - THE LINE IS EQUIPPED WITH A FULLY INTEGRATED CONTROL SYSTEM SUPPLIED BY BRUCKNER MILL ROLL STAND (SEMI-FINISHED PRODUCTS WAREHOUSE) - 150 TOTAL POSITIONS, OF WHICH 50 IN HEATED CLOSED ROOM - 1 PICK-UP FOR LOADING / UNLOADING WINDER AND SLITTER - 1 MANUAL EMERGENCY PICK-UP FOR LOADING/UNLOADING WI NDER AND SLITTER AND MAINTENANCE - 1 SHUTTLE TO MOVE MILL ROLLS IN AND OUT OF THE WAREHOUSE - 1 MAIN CRANE FOR MOVING MILL ROLLS / EMPTY CORES RECYCLING - HERBOLD GRINDER FOR SCRAP RECOVERY - 4 FLUFF SILOS - 1 EREMA MACHINE FOR REGRANULATION, APPROX. 700 KG/H SLITTER - ATLAS CW MACHINE, BUILT 1992, MAJOR UPGRADE 2010 - INLET MILL-ROLLS MAX Ø 1.2 M, WIDTH 8.2 M - 16 REWINDING STATIONS, WIDTHS FROM 400 mm TO 2450 mm, MAX Ø 1,000 mm - AUTOMATIC KNIVES AND RE-WINDING ARMS POSITIONING PACKING - SEMI-AUTOMATIC BALLOTTI LINE FOR CONDITIONING OF ROLLS AND PALLETS, BUILT 2000 - CONVEYORS - SCALING - STRAPPING - STRETCHING UTILITIES - 3 COMPRESSORS 3 BARS FOR COMPRESSED AIR CIRCUIT FOR RAW MATERIALS HANDLING - 2 COMPRESSORS 6 BARS FOR COMPRESSED AIR - 2 CHILLERS FOR CHILLED WATER PRODUCTION - 2 WATER COOLING TOWERS - 1 BOILER FOR THERMAL OIL PRODUCTION - 3 TRANSFORMERS 15 KV TO 380 V ADDITIONAL EQUIPMENT - SPARE PARTS FOR ALL OF THE ABOVE - TECHNICAL CONSUMABLES - IT EQUIPMENT FOR CONTROLLING THE MANUFACTURING EQUIPMENT AND DATA TRAFFIC, SUCH AS SERVERS, SWITCHES AND CABLING - LABORATORY EQUIPMENT FOR QUALITY CONTROL PURPOSES Line was producing 20 to 40 microns , line can produce down to 10 to 12 microns Learn More