Search results for: 'Open+e'
- Related search terms
- Open+end+SE10
- Open+end+spi
- Open+en
- Open+end+spinni
- open+end+spin
-
R-3269 ANTIQUE WOOD FIRED PROBAT ROASTER PROJECT - 60 KILOSR-3269 ANTIQUE WOOD FIRED PROBAT ROASTER PROJECT - 60 KILOS
HERE IS A RARE PROJECT - AS WE HAVE UN-EARTH A CLASSIC WOOD FIRED PROBAT ROASTER. MOST LIKELY FROM THE 30'S THAT IS CAST IRON CONSTRUCTION- LIKE TOTAL CAST IRON FROM THE OLD WORLD. THIS IS A 60 KILOS AND IT IS COMPLETE AND BEEN OUT IN A BARN FOR MANY YEARS. THE BELTS ARE SHOT - OBVIOUSLY, BUT WE OPENED EACH SLIDE GATE AND EACH DOOR WITHOUT DIFFICULTY - AND WITHOUT MOVING THE STUFF PILED UP ON THE SIDE - I BELIEVE IT TO BE TOTALLY COMPLETE. NOW, WE HAVE A CREW THAT CAN BE SENT IN TO PUT IT ALL INTO A PROTECTIVE BOX/CRATE AND GET IT SHIPPED. AS I DON'T KNOW IT THIS SHOULD GO INTO A MUSEUM OR INTO A REAL VISIBLE ROASTING OPERATION - AS IT COULD BE RESTORED AND UPGRADED - EVEN ADD A GAS BURNER IF NEEDED - BUT FOR SURE, IT IS A PROJECT.
THERE IS LITTLE TO NOTHING TECHNICAL - JUST HAVE TO PUT IT TOGETHER AS EACH PIECE IS OBVIOUS AS TO WHERE IT GOES. THE BOLT PATTERNS WILL NOT ALLOW FOR SOMETHING TO BE PUT IN THE WRONG SPACE. FIGURE A FOOT PRINT OF 5' WIDE BY; 9' DEEP AND 7 FOOT TALL.
QUANTITY: 1
Learn More -
R-4395 SQUARE (RECTANGLE) BUBBLE GUM PRODUCTION LINE, CAPACITY 80 KG/HOURREFERENCE NUMBER: R-4395
SQUARE (RECTANGLE) BUBBLE GUM PRODUCTION LINE, CAPACITY 80 KG/HOUR
MAIN TECHNICAL PARAMETERS:
PROFILES:
THIS LINE IS USED TO PRODUCE CANDIES IN VARIOUS COLORS AND DESIGNS, ESPECIALLY BUBBLE GUM IN X SHAPE, CUBIC, CORRUGATED, CHANNEL STYLE, AND OTHER KINDS.
IT IS DESIGNED TO FACILITATE THE OPERATION WITH RELIABLE PERFORMANCE AND CHANGEABLE CANDY STYLE.
A CORRUGATION-STYLE WRAPPING MACHINE OR A CUTTING/WRAPPING MACHINE CAN BE SUPPLIED IF REQUIRED.
ADVANTAGES:
1) RELIABILITY, EASY CLEANING AND MAINTENANCE
2) ACCURATE CUTTING AND SIMPLE CHANGEOVER
3) EASY OPERATION
4) AUTOMATIC BELT TENSIONING
REFERENCE NUMBER: R-4395
SQUARE (RECTANGLE) BUBBLE GUM PRODUCTION LINE, CAPACITY 80 KG/HOUR
MAIN TECHNICAL PARAMETERS:
PROFILES:
THIS LINE IS USED TO PRODUCE CANDIES IN VARIOUS COLORS AND DESIGNS, ESPECIALLY BUBBLE GUM IN X SHAPE, CUBIC, CORRUGATED, CHANNEL STYLE, AND OTHER KINDS.
IT IS DESIGNED TO FACILITATE THE OPERATION WITH RELIABLE PERFORMANCE AND CHANGEABLE CANDY STYLE.
A CORRUGATION-STYLE WRAPPING MACHINE OR A CUTTING/WRAPPING MACHINE CAN BE SUPPLIED IF REQUIRED.
ADVANTAGES:
1) RELIABILITY, EASY CLEANING AND MAINTENANCE
2) ACCURATE CUTTING AND SIMPLE CHANGEOVER
3) EASY OPERATION
4) AUTOMATIC BELT TENSIONING
Learn More -
H-1159 KUSTERS CONTINUOUS OPEN WIDTH MERCERIZING RANGE 1800mmH-1159 KUSTERS CONTINUOUS OPEN WIDTH MERCERIZING RANGE 1800mm
WIDTH OF FABRIC: 960mm TO 1800mm
ROLLER SURFACE WIDTH: 2000mm
DRIVE SIDE: LEFT SIDE
OPERATING SIDE: FAR SIDE
PRODUCTION SPEED: 60 METERS PER MINUTE
TECHNICAL SPEED: 80 METERS PER MINUTE
WATER PRESSURE: 2.0 ± 0.5 BAR CONSTANT, TO BE PROVIDED LOCALLY
VAPOR PRESSURE: 3.0 ± 0.5 BAR WET STEAM, TO BE PROVIDED LOCALLY
AIR PRESSURE (FREE OF OIL AND WATER): 7 BAR, TO BE PROVIDED LOCALLY
TYPES OF FABRICS: WOVEN
QUALITY OF FABRIC: COTTON, BLENDS, VOILE (DRY)
FABRIC WEITER: 65 TO 300 GRAMS PER SQUARE METERHIGH-EFFICIENCY PADDER TYPE 222.50
LINE FORCE: 50 N/mm (50 kp/cm)HIGH-EFFICIENCY PADDER TYPE 824.27
LINE FORCE (MAX.): 50 N/mmHIGH-EFFICIENCY PADDER TYPE 824.22
LINE FORCE (MAX.): 50 N/mmMAANDER TYPE 834.43
FABRIC CONTENT: 15 METERSSQUEEZER TYPE 225.65
LINE FORCE: 10 N/mmMAANDER TYPE 834.43
FABRIC CONTENT: 15 METERSSQUEEZER TYPE 225.65
LINE FORCE: 10 N/mmQUANTITY: 1
Learn More -
P-4326 BABY WET WIPES PRODUCTION LINEREFERENCE NUMBER: P-4326
BABY WET WIPES PRODUCTION LINE
Model L80
Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface: 10" LCD touch screen
Cutting: synchronous flail knife
Packing style: automatic distribute,2 sets packing machine can respective online
Unwinding structure: 80 electronic eyes detect online (auto splicing machine: 32 sets)
Frequency division detection: 80 electronic eyes detect online
Frequency division pulling: 4 sets dry wipes pulling , 2 sets wet wipes pulling
Auto splicing: film automatic splicing, label automatic switching
Frequency division detection: nonwoven ,film, label detect respectively
Metal detect: online metal detector
Inferior eliminate: aluminizing paste connector rejected online
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 80 fluid pipes spray independently
SUS Agitate tank: 2 sets, 1000L stainless steel agitate tank
Liquid level control: electronic detection, auto control
Specifications
Raw material: spunlaced nonwoven, therbond etc. nonwovens
Raw material specification: max W220mm, φ1400mm, max W1050mm, φ1000mm
Axis QTY settings:80 rolls raw materials (auto splicing type 32 rolls)
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic bonding without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding type: single extraction & interfold type
Wet wipes size:L120-250mm W90-110mm
Open size: L120-250mm W150-220mm
Package size: L150-350mm W80-120mm H20-100mm
Design speed: 120bags/min &250cutting/min
Production speed: 100 bags/min &200 cutting/min
Machine space: L54000mm W3500mm H2100mm, L57000mm W4600mm H2100mm(auto splicing machine)
Power: AC 380V 50/60Hz 35KW(auto splicing machine:40KW)
Compressed air: 0.6-0.8Mpa 500L/min
Machine net weight :30000kg(auto splicing machine 35000Kg)
Option equipment: Coding machine Big roll material automatic splicingQUANTITY: 1
Learn More -
G-8448 COMPUTERIZED AUTOMATIC FEATHER FILLING MACHINECONSISTING OF: 1) COMPUTERIZED AUTOMATIC FILLING MACHINE, WHICH INCLUDES: STAINLESS STEEL MAIN FRAME PLC TOUCH SCREEN WEIGHING SCALE WEIGHING SENSOR QUANTITATIVE BARREL AIR AMPLIFIER FEATHER FILLING NOZZLE FOOT PEDAL SWITCH RELAY AIR BLOWER FEATHER PIPES 2) INCLUDES: STAINLESS STEEL FRAME INNER CONTAINER FILTER SCREEN SPEED-ADJUSTABLE BEATER FEATHER SUCKER AIR NOZZLE AND VALVES 3. AIR COMPRESSOR (SELF-PREPARED) Learn More -
TT-8484 MS LARIO SINGLE PASS DIGITAL PRINTING MACHINE, WIDTH 1600mm, 7 COLORS, YEAR 2011TT-8484 MS LARIO SINGLE PASS DIGITAL PRINTING MACHINE, WIDTH 1600mm, 7 COLORS, YEAR 2011 1. MS LARIO SINGLE PASS DIGITAL PRINTING MACHINE 2. MAX. PRINTING WIDTH: 1600mm 3. NO. OF COLORS: 7 4. 5 BARS WITH EACH 15 PRINTHEADS 5. 2 BARS WITH EACH 30 PRINTHEADS QUANTITY: 1 Learn More -
TT-8352 NAGEMA EL9, 400 TO 450 PIECES PER MINTT-8352 NAGEMA EL9, 400 TO 450 PIECES PER MIN 1. BRAND: NAGEMA 2. MODEL: EL9 3. CONDITION: REFURBISHED QUANTITY: 1 Learn More -
TT-8282 BEAM WINDER OF BEAM DYEING MACHINE, WIDTH 3660mm, WITH PAD FOULARDTT-8282 BEAM WINDER OF BEAM DYEING MACHINE, WIDTH 3660mm, WITH PAD FOULARD 1. WINDER OF BEAM DYEING MACHINE IS SUITABLE FOR RAW MATERIALS OF FABRIC SPOOLS OR A-SHAPED FRAMES. 2. IT UNDERGOES WIDENING FOR DE-CREASING WRINKLES, LASER ALIGNMENT, WATER TANK IMMERSION, WATER REMOVAL BY ROLLING, TENSION CONTROL, AND THE WINDING IS DONE ON THE AXIAL WINDING DRUM OR THE DEDICATED EQUIPMENT OF THE A-SHAPED FRAME. 3. MAIN PARAMETERS: 4. MATERIAL: STAINLESS STEEL 304 5. WIDTH OF FABRIC: 3660mm QUANTITY: 1 SET Learn More -
TT-7999 BLISS INDUSTRIES E-4815 “ELIMINATOR” HAMMER MILL, 75 HPTT-7999 BLISS INDUSTRIES E-4815 “ELIMINATOR” HAMMER MILL, 75 HP 1. BRAND BLISS INDUSTRIES 2. CONDITION USED 3. POWER 75 KW QUANTITY: 1 Learn More -
TT-7967 KATO/WAUKESHA GENERATOR SETS, 4.3 MW, 60 Hz, YEAR 2001TT-7967 KATO/WAUKESHA GENERATOR SETS, 4.3 MW, 60 Hz, YEAR 2001 1. NATURAL GAS 2. NEW AND NEVER INSTALLED Learn More