Search results for: 'heat+press''

See all pictures: https://ibb.co/album/gpK9bF

#1 GRIBETZ MPLUS PATTERN LINK 90 TACK AND JUMP 3 BAR WITH PANEL CUTTER 4 POS CREEL

#2 GRIBETZ GI4300 TACK AND JUMP 90" 3 BAR WITH PANEL CUTTER 3 POS CREEL

# 3 EMCO 2 BAR 1X3 WITH PANEL CUTTER, YEAR 2001 (FOR PARTS)

#4 EMCO COMPUSTITCH 3 BAR
WITH JAMES CASH K-10 PANEL CUTTER

#5 GRIBETZ GI2300 90" SET UP FOR BORDERS 4 POS CREEL

#6 EMCO 9000 COMPUSTITCH 1X3X6 BUT RUNNING 1X6
WITH BORDER CUTTER JAMES CASH K-10 1997

#7 EMCO 9000 COMPUSTITCH 3 BAR 1 POSITION CREEL
WITH BORDER CUTTER JAMES CASH K-10

#8 GRIBETZ 3 BAR 92"
WITH JAMES CASH K-12

#9 TAPE EDGE WITH SINGER 300UX6 STEEL TABLE 55 X 81

#10 ATLANTA ATTACHEMENT TAPE EDGE WITH SINGER 300UX5 WITH STAINLESS STEEL TABLE 60 X 80

#11 ATLANTA ATTACHEMENT TAPE EDGE WITH SINGER 300UX5 WITH STAINLESS STEEL TABLE 60 X 80

#12 ATLANTA ATTACHEMENT TAPE EDGE WITH PFAFF 5625 WITH STAINLESS STEEL TABLE 60 X 80

#13 ATLANTA ATTACHEMENT TAPE EDGE WITH SINGER 300UX6 WITH STAINLESS STEEL TABLE 60 X 80

#14 PORTER TAPE EDGE PFAFF DISSASSEMBLED HEAD TABLE SIZE 60 X 82

#15 ATLANTA ATTACHMENT TAPE EDGE WITH PFAFF 5625 STAINLESS STEEL TABLE 59 X 79

#16 ATLANTA ATTACHEMENT TAPE EDGE WITH SINGERS 300UX5 STAINLESS STEEL TABLE 60 X 80 16"H

#17 BUILD UP TABLES MOSTLY 60 X 80 OF WHICH 15 ARE GLOBAL SYSTEMS AND 2 ARE HOME MADE

#19 ? SMALL BALER CONSOLIDATED MODEL STDS-2 36' WIDE X 18" FRONT TO BACK X 50"H

#20 SCREW UNBALER ATLANTA ATTACHMENT FOR 18 INNERSPRING CAPACITY

#21 PIQUA BALER 58 X 31 X 54" TALL 220 VOLT

#22 SCREW UNBALER WBSCO

#23 CART FOR INNERSPRING BALE

#24 GRIBETZ PANEL CUTTER ( I HAVE ALL THE INFO ALREADY)

#25 LAMINATOR GRIBETZ STRATA WITH HOT ROLL AND FELT BLANDET FOR LAMINATING WITH WEB SUBSTRATE (ROTARY HEAT PRESS) MODEL GLM011 220 VOLT , 2 POS CREEL

#26 HORIZONTAL FOAM CUTTER ESCO MODEL HTX 51-88 PU+
88" WIDE , X 118" LONG , KNIFE GRINDERS , SUCTION TABLE
TOUCH SCREEN PANEL , ELECTRICAL CONTROL PANEL
AUTOMATIC LUBRICATION BINKS MODEL 80-600 SG2 PLUS

#27 VERTICAL FOAM CUTTER MODEL EL-4
112" WIDE
OUTSIDE TABLE 73"
INSIDE TABLE 74"
FENCE 8" PLUS 16 " EXTENSION
68" THROAT
112" OVERALL HEIGHT
194" TOTAL RAIL WIDTH

#28 PORTER SERGER FLANGER MODEL 4000 WITH AIR FLOTATION TABLE
220 VOLT

#29 ATLANTA ATTACHMENT JUKI SERGER FLANGER MODEL MO6916G BELT DRIVE WITH AIR FLOTATION TABLE

#30 ATLANTA ATTACHEMENT JUKI SERGER FLANGER MODEL MO6916G BELT DRIVE WITH AIR FLOTATION TABLE

#31 SINGER LONG ARM REPAIR 25"

#32 ATLANTA ATTACHEMENT RUFFLER
MODEL 13XXMF

#33 ATLANTA ATTATCHMENT 9 NEEDLE SEWING MACHINE (MULTINEEDLE) MODEL 4000D

#34 SINGLE NEEDLE SIT DOWN MACHINES OF WHICH 3 ARE PORTER

#35 AVANCE EMBROIDERY MACHINE

#36 GALKIN "X" SEWING MACHINE FOR HANDLES
GAP5OBT-3 , JUKI MODEL LK1900CV

#37 ATLANTA ATTACHMENT DOUBLE BORDER SERGER 25" OPENING , PEGASUS HEAD
MODEL E521-130 AND EX5203-M03

#38 ATLANTA ATTACHMENT BINDER FOR HANDLE MAKING

#39 ANDERSON MULTISLITTER 10 BLADES 92" WIDE

#40 ANDERSON STAND ALONE PANEL CUTTER 103"WIDE WITH 2 EDGE SLITTERS AND ONE CROSS CUTTER
WITH 1049 HOURS ON THE CLOCK

#41 CONVEYOR FOR SEW DEPARTMENTE 34" WIDE OVER 100 FEET LONG

#42 TOYOTA FORKLIFTS 6270 LBS CAPACITY MODEL 71CCUT5 (TWO)
ONE NISSAN FORKLIFT
ONE CATERPILLAR FORKLIFT

#43 ONE GLUE STATION 4 GUNS , SABA GUNS , NOT THERE (BELONG TO SABA)

#44 240 FEET LONG CONVEYOR FEEDING MATTRESS WRAPPING DEPARTMENT

#45 TWO MERELLO WRAPPERS 20 INCH MAX HEIGHT X 88 " WIDE, YEAR 2016

#46 TECNOMAC (ITALY) MATTRESS ROLL AND PACK MACHINE MODEL TK381 YEAR 2015
400 VOLT X 50HZ X 30 KW
8 BAR AIR PRESSURE

TILE FACTORY DESIGNED BY SACMI / ITALY
YEAR ESTABLISHED 2014 TO 2016
THIS PLANT IS AN ENVIRONMENTALLY FRIENDLY ENTERPRISE, WHEN IT RECYCLES 100% OF ITS EFFLUENTS AND PERFORMS HEAT RECOVERY, THEREBY SAVING ENERGY

See all pictures:
https://www.flickr.com/photos/183869481@N08/albums/72157710649767958

THE PLANT:
COVERS AN AREA OF 22 THOUSAND SQUARE METERS
THE PRODUCTION CAPACITY IS 7 MILLION SQUARE METERS / YEAR
CERAMIC FLOOR TILES
CERAMIC WALL TILES
BMR POLISHING LINE
BMR SQUARING & CHANFERING LINE
THE MAIN RAW MATERIALS ARE CLAY (DB-4) - 31 %, ALBITE (STD5) - 60 %
NEPHAIIN (PN9595) - 2.5 %, KAOLIN (RHB1) - 6.5 %
ON TOP OF IT THEY ARE USING GLAZE MATERIALS AND PAINTS
•FROM THE MOMENT THE MATERIAL IS PREPARED IT IS BEING DRIED PRESSED ON ONE OF FOUR (4) PRODUCTION LINES.
•TWO (2) LINES ARE WITH SACMI PRESSES OF PH 7,500 TON EACH AND HORIZONTAL DRYERS SACMI
•TWO LINES ARE WITH SACMI PRESSES OF PH 3,590 TON EACH AND VERTICAL DRYERS SACMI
•ALL FOUR (4) LINES HAVE THEIR OWN DIGITAL PRINTING MACHINE INCORPORATED
•ALL PRODUCTS ARE BEING GLAZED AND FIRED ON 1200 DEGREES IN ONE OF THE TWO (2) KILNS, SACMI
FOUR (4) SORTING, PACKING AND PALLETIZING LINES
GLAZE PREPARATION LINE
COMPLETE INSTALLATION FOR SMALL PRODUCTION CAPACITIES
COMPLETE FOILING LINE
COMPLETE ELECTRIC INSTALLATION
POWER GENERATOR UNIT
COMPRESSED AIR INSTALLATION

MACHINES ARE MADE BY:
SACMI: ITALY
NUOVA ERA / ROBOBOX: ITALY
BMR: ITALY
IN.TE.SA: ITALY
CUCCOLINI: ITALY
SYSTEM CERAMICS: ITALY
TGMAC SR.L: ITALY
DURST: GERMANY
ROTOCOLOR MAG: ITALY
NUOVA FIMA: ITALY
OMS: ITALY
MARPAK OMS: ITALY
MESSERSI PACK: ITALY

TILE SIZES
THE FACTORY MANUFACTURES TILES OF VARIOUS SIZES FROM 300 X 300 TO 1200 X 1200mm IN VARIOUS TEXTURES AND DESIGNS USING DIGITAL PRINTING MACHINES
PRODUCTION CAPACITY IS 7 MILLION SQUARE METERS / YEAR
THE FACTORY IS FULLY AUTOMATED AND USING ADVANCED CONTROL SYSTEMS!

HUGE AMOUNT OF ORIGINAL SPARE PARTS AVAILABLE WITH THIS PLANT
THIS PLANT IS AVAILABLE WITH THE COMPLETE ELECTRIC, AIR, GAS, RECYCLING INSTALLATION

THIS PLANT CAN BE SOLD: WITH 4 LINES OR 2 AND 2 LINES

SILICON COATED NOMEX FELT (ITB BRAND – ITALIAN)
BLANKET THICKNESS: 8mm
PNEUMATICALLY ADJUSTABLE FELT PRESSURE
MAXIMUM WORKING WIDTH: 2100mm (82.6”)
EVA HOT MELT FILM, FILM ROLL MIMIMUM 500 METERS, MAXIMUM 1000 METERS
36 KW HEATER RESISTANCE
MAIN DRUM DIAMETER: 500mm
TEFLON COATED MAIN CYLINDER
PNEUMATIC BLANKET EDGE CONTROL BY PHOTOCELL
WORKING SPEED: 5 TO 10 METERS PER MINUTE, DEPENDING ON FABRIC THICKNESS (THICK FABRIC IS SLOWER, NORMAL FABRIC IS FASTER)
PLC CONTROLLER WITH TOUCH SCREEN OPERATOR PANEL
PROGRAMMABLE HEATING UP AND COOLING DOWN
ROLL TO ROLL WORKING SYSTEM
SLITTING UNIT WITH 3 PIECE PNEUMATIC CUTTER AND DUAL CENTER REWINDING UNIT (OPTIONAL)
440 V 3-PHASE, 60 Hz, 55 AMP

LEAD TIME: 6 TO 8 WEEKS AFTER RECEIPT OF DEPOSIT

L-6683 DOUBLE BELT COMPRESSION THERMOBONDING OVEN SYSTEM 6000mm X 3300mm WIDE

INCLUDING:

THERMOBONDING OVEN
- DOUBLE COMPRESSION CONVEYORS SYSTEM SINGLE PASS
- DOUBLE BELT SOFT & HARD WADDING OVEN (6000mm LONG)
WORKING WIDTH: 3300mm
LENGTH OF HEATING CHAMBER: 6000mm
PANELS ARE 100mm THICK
TEMPERATURE INSIDE: UP TO 220 C
GAS BURNER 25 CUBIC METER PER HOUR DEPENDING ON MATERIAL THICKNESS
TWO GAS BURNERS ONE ON EACH SIDE 80 START AND 25 RUN CBM/H WITH MAINLINE 2 INCH
REDUCED TO 1” AT BURNER, PRESSURE 10 TO 15 KPascal
TWO HOT AIR FANS 22 KW EACH
ONE EXHAUST FAN 5.5 KW
WORKING SPEED: 1 TO 8 METERS PER MINUTE
DOUBLE TEFLON BELT WITH SINGLE PASS, WEAVE IS 2mm X 2mm
SUCTION HOOD AT THE ENTRANCE
THICKNESS OF FINAL PRODUCT 20 TO 150mm DEPENDING

COOLING UNIT
- FOUR COOLING PRESS ROLLERS 200mm diameter , 10mm shell thickness, with chiller
12,000 watt output power , input power 5700 watt , capacity 65 liter per minute
WORKING WIDTH: 3300mm
- LENGTHWISE CUTTER – 7 KNIVES ,pneumatically activated , BLADE DIAMETER 650mm
-SINGLE MOTOR
- MOVABLE SIDEWAYS
- CROSS CUTTER 2.2 KW MOTOR . UP TO 4 CUTS PER MINUTE
MAXIMUM LENGTH 2000mm
WORKING WIDTH: 2800mm
PVC CONVEYOR AT THE EXIT

ELECTRICAL CONTROL SYSTEM
-ELECTRICAL CABINET UL COMPONENTS

QUANTITY: 1

ELECTRICAL HEATED WIRE STITCHING MACHINE, 800 RPM, 1 TO 6 HEADS

REFERENCE NUMBER: R-7904

DEINKING PLANT, CAPACITY 150 TPD

QUANTITY: 1

REFERENCE NUMBER: L-4955
BRAND: BENNINGER
MODEL: SIZETEC
TYPE: BB-S/ZT4/4TKD
YEAR: 1994

R-3249 GIESEN COFFEE ROASTER W15A SELKIRK OXIDIZER - 15 KILOS

AN EXCEPTIONAL OPPORTUNITY FOR READY TO BE DELIVERED/INSTALLED EQUIPMENT CREATED BY A CHANGED BUSINESS MODEL.
NATURAL GAS
240V/60 HZ
BLACK/SILVER

SELKIRK SPECIALIZES IN THERMAL AFTERBURNERS FOR COFFEE ROASTING MACHINES FROM 10 TO 120 KGS PER BATCH. AFTERBURNERS ARE DESIGNED OF QUALITY MATERIALS FOR LONG SERVICE LIFE. INTEGRATED EFFICIENT GAS BURNERS WHICH REDUCE OPERATING COSTS. BURNER CONFORMS TO UL 295 STANDARD FOR COMMERCIAL/INDUSTRIAL GAS BURNERS. AFTERBURNER DESIGN PROVIDES LONG RETENTION TIMES TO ELIMINATE SMOKE AND ODORS FROM THE ROASTING PROCESS. STANDARD AFTERBURNER OPERATING TEMPERATURE IS 1250 F, BUT CAN EASILY BE ADJUSTED TO MEET LOCAL AIR QUALITY REQUIREMENTS. GAS BURNER IS COMPLETELY SELF MODULATING, AND OPERATOR CONTROLS ARE DESIGNED FOR EASE OF USE.

OXIDIZER SPECIFICATIONS:
TO-2CS321 THERMAL OXIDIZER WITH THE FOLLOWING DESIGN FEATURES:
WAYNE COMBUSTION LC 1500 BURNER WITH 1.5 MILLION BTU PER HOUR MAXIMUM INPUT.
DUNGS MULTIBLOC SAFETY VALVE MBC VEF 2500.
DUNGS LOW AND HIGH GAS PRESSURE SWITCHES.
SIEMENS LME SERIES FLAME SAFETY CONTROLLER.
FLAME SENSING ROD FOR FLAME VERIFICATION.
FULLY MODULATING TO MODULATE AT PRE-SET OPERATING TEMPERATURE;
BURNER AND CONTROLS CONFORM TO UL 295 STANDARD FOR COMMERCIAL INDUSTRIAL GAS HEATING EQUIPMENT.
OPERATOR FRIENDLY CONTROL SYSTEM.
TO-2CS321 DIMENSIONS:
OUTSIDE DIAMETER: 36"
OVERALL HEIGHT FROM FLOOR: 82"
INLET DIAMETER: 6"
OUTLET DIAMETER: 10"
EXTERIOR TO BE POWDERCOATED CARBON STEEL MATTE BLACK (OPTIONAL COLORS AVAILABLE).
4" OF HIGH DENSITY CERAMIC INSULATION BETWEEN INTERIOR AND EXTERIOR SURFACES.

QUANTITY: 1

S-1220 KUSTERS CALANDER AND EMBOSSING CALENDER, WORKING WIDTH 3400mm, YEAR 2002

KUSTERS CALANDER AND EMBOSSING CALENDER
MAKE: KUSTERS
YEAR: 2002
TYPE: 213.40/3400
WORKING WIDTH: 3400mm
3 CYLINDERS
COTTON – STEEL – RACOLAN
HYDRAULIC PRESSURE MAXIMUM 40 TONES
COMPLET ENTRY WITH METAL DETECTOR AND SEWING DETECTOR
5 DIFFERENT STEEL EMBOSSING CYLINDERS
PREPARED FOR OIL HEATING WITH PUMP AND VALVES
EXIT WITH SALVADE AXIAL A-FRAME ROLLING DEVICE
INCLUDING TWO MANUAL HAND CRANES
WITH FRAME TO CHANGE THE CYLINDERS

MACHINES ARE STILL RUNNING

QUANTITY: 1

S-1167 SEALING AND SHRINKING MACHINE, WIDTH 850mm

SEALING AND SHRINKING MACHINE
SHRINKING CANS, BEERS, PURE WATER ETC
SHRUNK BY PE FILM, PVC, POF ETC.
CONVEYING BELT CAN BE MADE OF ROLLERS
OR TEFLON MESH BELT
OR S/S MESH BELT
STAINLESS STEEL HEATER
LARGE POWER FAN SYSTEM
AND SUPER COOLING SYSTEM TO ENSURE
THE EXCELLENT SHRINKING
ITEM 001
MAX PACKING SIZE (MM): L500 X W300 X H350
MIN PACKING SIZE (MM): 280 X 100 X 100
PACKING SPEED: 6 TO 10PCS/MINUTE
VOLTAGE: 220V/50HZ
RATED POWER: 1.8KW
SEALING TIME/SHRINK TIME/TEMPERATURE: 0.5-1.5S/0-0.6S/0 -250 °C
WIDTH/THICKNESS OF THE FILM: 600mm/0.04 -0.12mm
DIMENSION: L1030 X W850 X H970mm
GROSS WEIGHT: 350 KGS
AIR PRESSURE OF WORKING: 4 TO 8MPA
SHRINK FILM: PE POF PVC

QUANTITY: 1

ITEM 002
MAX PACKING SIZE (MM): W600*H400*L
PACKING SPEED: 15M/MIN
VOLTAGE: 380V/50HZ
RATED POWER: 20KW
DIMENSION: L3200 × W850 × H1580mm
GROSS WEIGHT: 380 KGS
SHRINK FILM: PE POF PVC

QUANTITY: 1