Search results for: 'Add'

T-9752 KARL MAYER CARBON MACHINES BIAXIAL AND MULTIAXIAL PROPERTIES: SINCE ALL FIBERS POINT IN ONE DIRECTION, THE SCRIM CAN BE IDEALLY DRAPED GOOD SOAKABILITY WITH LITTLE RESIN CONSUMPTION CAN BE DRAPED VERY WELL AROUND CURVES AND EDGES EASY TO CUT ELECTRICALLY CONDUCTIVE, INFUSIBLE HIGH STRENGTH AND RIGIDITY DUE TO GRAPHITE-LIKE FIBER STRUCTURE BIOCOMPATIBLE TRANSPARENT TO X-RAYS LOW SPECIFIC WEIGHT IDEAL FOR SURFACE USE (LITTLE FIBER IMPRINTS) IDEAL FOR PROCESSING WITH EPOXY RESIN! TEXTILE SEMI-FINISHED PRODUCTS MADE OF PRE-SPREAD AND PLANE-PARALLEL LAID FIBERS FORM THE GROUP OF UNIDIRECTIONAL FABRICS. THE FIBERS ARE USUALLY LAID AT 0°, MORE RARELY AT 90°. BY LAYING THE UD FABRICS ALONG THE LINES OF FORCE ACTING IN THE COMPONENT, THE LIGHTWEIGHT POTENTIAL OF THE CARBON FIBER IS OPTIMALLY EXPLOITED. UD FABRICS CONSIST OF ONE OR MORE SUPERIMPOSED FIBER LAYERS FIXED WITH AN EPOXY-COMPATIBLE BINDER THREAD. THE SPECIAL SPREADING TECHNIQUE PRODUCES FABRICS WITH HIGH FIBER PARALLELISM, WITHOUT KNOTS AND FIBER TWIST. SPREAD FIBERS ABSORB THE RESIN BETTER, RESULTING IN HIGHEST LAMINATE STRENGTHS. QUANTITY: 3 LINES Learn More

T-9600 XENON ARC LIGHT FASTNESS TESTER KEY SPECIFICATION: CHAMBER TEMPERATURE: 25-55℃; RESOLUTION: 0.1℃ CHAMBER HUMIDITY: LIGHT CYCLE: 10-70%RH; RESOLUTION: 0.1RH% DARK CYCLE: 30-95%RH; RESOLUTION: 0.1RH% BST: 40-85℃; ACCURACY: ±1℃; RESOLUTION: 0.1℃ BPT (OPTION): 40-80℃, ACCURACY: ±2℃; RESOLUTION: 0.1℃ TIME CONTROL RANGE: ≤10000H IRRADIANCE CONTROL RANGE: 0.80-1.20W/M²@420NM (OPTION: 340NM, 420NM, 300-400NM OR 280-800NM) ACCURACY: ±0.02W/M²@420NM. DIGITAL SETTING, CLOSED-LOOP AUTOMATIC COMPENSATION XENON ARC LAMP RATED POWER: 2500W SAMPLE HOLDER ROTATION SPEED: 2-7 RPM SAMPLE HOLDERS CAPACITY: ISO: 145 × 45mm 12PCS OR AATCC: 145 × 70mm 6PCS TIMING OF EACH SAMPLE HOLDER, RESPECTIVELY: ≤10000H LIGHT PERIOD: ≤1000H SPRAY PERIOD: ≤1000H POWER: AC220V ±10% 50Hz 6.5KW RATED POWER: 3.3KW DIMENSION: 920 × 650 × 1680mm WEIGHT: 180KG Learn More

T-9660 COMCO FLEXO LABEL PRESS, 11 COLORS, 22”, YEAR 1999 NOTES: INCLUDES GAS FIRED DRYING SYSTEM IN P/S 1-10, CHAMBERED DR. BLADE ASSEMBLIES, UV LAMINATION IN P/S 11, FORWARD/REVERSE PRINT IN P/S 1, KTI LS BUTT SPLICER ON UNWIND, KTI MR TWO-SPINDLE TURRET REWIND, KTI LAM UNWIND W/WEB GUIDE, 2012 ENERCON COMPAK 2000 CORONA TREATER AND 2006 CARRIER AQUA-SNAP 22-TON CHILLER. COMPLETE PRESS REBUILD IN 2012. 1. IN ADDITION WATER BASED LAMINATION CAPABILITIES IN STATION 11 WITH RUN SPEEDS UP TO 425 FPM DEPENDING ON STRUCTURE. 2. ENERCON TREATER REBUILT ON 6/5/2020. 3. COATING SLEEVE CYLINDER AND SLEEVE CHANGE OUT AIR STAND FOR GLUE STATION. 4. EXTENSIVE PLATE CYLINDER LIBRARY 5. ADDITIONAL DOCTOR BLADE CHAMBERS Learn More

T-9532 DMT BOPP LINE, WIDTH 4200mm, YEAR 1995 QUANTITY: 1 Learn More

T-9642 DILO NEEDLE LOOM WITH DILO FEEDING SYSTEM, WORKING WIDTH 2500mm, YEAR 1986 TO 1989 YEAR OF CONSTRUCTION: 1986 (NEEDLE LOOM), 1989 (FEEDING SYSTEM) ADDITIONAL: FEEDING SYSTEM REBUILT / UPGRADED IN 2020 QUANTITY: 1 COMPLETE LINE Learn More

V-2004 FECKEN AND KIRFEL AUTOMATIC VERTICAL FOAM CUTTING SLITTER BAND SAW IN RUNNING CONDITION QUANTITY: 1 Learn More

YY-1792 ROLL WINDING MACHINE (AUTOMAT FOR FILM AND PAPER), WIDTH 1.200mm, YEAR 2006 FILM THICKNESS: FROM 5 MICRONS TO 4 X 100 MICRONS MINIMUM WINDING WIDTH: 600mm / 23.3 IN MAXIMUM WINDING WIDTH: 1200mm / 47,2 IN MAXIMUM FILM SPEED: 220 M/MIN (720 FT/MIN) MAXIMUM ROLL CHANGES: 16/MIN MAXIMUM ROLL DIAMETER: 250mm / 9.8 IN CORES: WITH OR WITHOUT CORES PAPER CORE DIAMETER: FROM 38mm (1.5 IN) NUMBER OF LANES: 1 PERFORMANCE: MAXIMUM FILM SPEED: 220 M/MIN (720 FT/MIN) MAXIMUM ROLL CHANGES: 16/MIN QUANTITY: 1 Learn More

J-4128 AUTOMATIC VACUUM PACKING MACHINE, 6 TO 8 PIECES PER MINUTE AUTOMATIC VACUUM PACKING MACHINE CAPACITY: 6 TO 8 PIECES PER MINUTE WORKING AREA: 800 x 800mm SEALING LENGTH: 800mm POWER: 1.5 KW QUANTITY: 1 Learn More

YY-1485-D MATTRESS CONVEYOR LINE WITH SPRAY BRIDGE FOR LAMINATING OR APPLYING GLUE QUANTITY: 1 Learn More

YY-1357 HORIZONTAL CONTINUOUS FOAMING MACHINE, 21000 KG PER HOUR MAIN TECHNICAL SPECIFICATION: 1.TOTAL LENGTH: 35000mm × WIDTH 4500mm × HEIGHT 3000mm 2. FOAMING WIDTH 1000mm TO APPROXIMATELY 2300mm 3.FOAMING HEIGHT: 1200mm 4.FOAMING DENSITY: 8 KG PER m3 TO APPROXIMATELY 80 KG PER m3 5.FOAMING SPEED: 0 TO 6.8 METERS PER MINUTE 6.MAX TOTAL OUTPUT: 80 LITERS TO 350 LITERS PER MINUTE 7.MATERIAL SPRAYING METHOD: TROUGH 8.ALL KINDS OF VALVES, PIPES AND SPARE PARTS 9.THE MEMBRANE AUTOMATICALLY RECEIVES THE VOLUME INSTALLMENT (TO USE THE NEWEST INSTALLMENT, TO GUARANTEE THAT IT RECEIVES VOLUME SIDE PAPER SMOOTHLY); 10.USES ENVIRONMENTALLY-FRIENDLY EQUIPMENT TO PURIFY EXHAUST GAS, NO POLLUTION PRESENT 11. RESPONSIBLE FOR ELECTRICAL, MECHANICAL MAINTENANCE PERSONNEL TRAINING 12.THE BLOCK CUTTER MACHINE CUTS THE BUN LENGTH USING ROTARY ENCODER AND THICKNESS GAUGE TO SETUP AND CONTROL 13. MIXING HEAD FRAME PLUS OVERHAUL STAND, LADDER AND BARRICADE 14.MIXING HEAD IS GERMAN PRECISION TECHNOLOGY 15.FOAMING OVEN, DECLINING BOARD AND OVEN INNER CONVEYOR MACHINE PARTS 16. MIXING HEAD SIZE: Φ100mm 18.MIXING HEAD MOTOR: 30 KW 19.TOTAL POWER: ABOUT 80 KW Learn More