Search results for: 'Roll e'

REFERENCE NUMBER: M-1484 (66025GYT5U) KLIEVERIK TRANSFER PRINTING CALENDER MODEL TC131 YEAR 1995 – 126” BELT KLIEVERIK TRANSFER PRINTING CALENDER 126" BELT 1995 YR MODEL TC131 30" DIA. X 138" FACE CYLINDER WITH 126" BLANKET (NOMEX) ONBOARD ENCLOSED HEATING SYSTEM INCLUDES SCRAY, HIGH ENTRY WITH E&L KF-2040 GUIDER OPERATOR PLATFORM E&L WIDTH MONITOR 4-ROLL ACCUMULATOR 136" WITH 12 YD CAPACITY 2-ROLL SURFACE TAKE-UP WITH EDGE GUIDING AND YARDAGE COUNTERS OPERATING SPEED OF 2-20MTR/MIN THIS MACHINE EMPLOYS A VAPOR PHASE PROCESS TO TRANSFER DYESTUFF FROM THE PAPER TO THE CLOTH UNDER THE INFLUENCE OF HEAT AND PRESSURE THE CALENDER DRUM IS HEATED BY ELECTRICAL ELEMENTS PLACED IN AN OIL BATH DIA. OF TRANSFER PAPER ROLL - 14" MACHINE SPEED - MIN. - 2 METERS/MINUTE MAX. - 20 METERS PER MINUTE MAX DRUM TEMPERATURE - 220C (464 F) DIA. HEATED DRUM - 760mm - 30.4" BLANKET WIDTH - 3500mm - 140" OAD OF CALENDER: 112.6" L. X 182.4" W. X 89" T. WEIGHT - 7,400KG (16,314 LBS). QUANTITY AVAILABLE: 1 Learn More

KNITTING, DYEING, FINISHING MILL #1 Learn More

REFERENCE NUMBER: M-4136 SANTEX TENTER FRAME YEAR 2003-UP TO 3400mm – 3 ZONE – VERTICAL PIN – HOT OIL TYPE: SANTEX TENTER FRAME YEAR: 2003 WORKING WIDTH: 800mm UP TO 3400mm SPEED: 2 UP TO 20 M/MIN CHAIN: VERTICAL PIN CHAIN DRYER: 3 COMPARTMENTS DRYER LENGTH: 6 METERS MAX. TEMP.: 230° C HEATING: DIATHERMIC OIL OIL BOILER: GARIONI NAVAL TH 500 CAPACITY: 581 KW, MAX. TEMP. 350° C, NITROGEN COVERED TOTAL LENGTH NEEDED: APPROX. 20,000mm TOTAL WIDTH OF MACHINE: 6,200mm TOTAL HEIGHT OF MACHINE: 3,100mm ENTRY COMBINATION GUIDING CHAIN FOR A-FRAMES CORRECT POSITIONING RUBBERIZED ROLLERS AS INFEED UNIT WECO IMPREGNATION UNIT, CONTROL AND TANK ROLLER WITH LOAD CELL MAHLO WEFT STRAIGHTENER, TYPE: RFMC-10A 6 MEASURING HEADS, WW 4200mm OPERATION PEDESTAL OPERATION PANEL, MONITOR 1 UPPER INFEED ROLLER + 1 BENDED ROLLER E+L FABRIC INFEED VERTICAL PIN CHAIN 3 SECTIONAL DRYER (6 M) COOLING UNIT AT EXIT 2 CAMERAS VIDEO CONTROL STRETCH WORK: 2 PRESSING ROLLERS 3 HEATED DRAG ROLLERS WITH SINGLE DRIVE TEMPERATURE 80° C TO 250° C ON-WINDING UNIT FOR A-FRAMES ELECTRICAL CABINET QUANTITY AVAILABLE: 1 Learn More

SUCKER SIZING MACHINE MODEL ZTWL WIDTH 2300mm, YEAR 1984 (COMPLETE RECONDITIONED IN YEAR 2002) HEAD MACHINE MOD. WL - WORKING WIDTH 2300mm = 90 INCHES (SERIAL N.121510119). 2 SIZING BOX MOD. LC - FIRST SIZING BOX AT LOW PRESSURE (800 KG). SECOND SIZING BOX FITTED WITH BENNINGER-ZELL PRESSURE ROLLERS AT MEDIUM PRESSURE (3.000 KG) - WORKING WIDTH 1800 mm (SERIAL N.1270119). FOUR PRESSURE ROLLERS FOR EACH SIZING BOX (TWO LATERAL AND TWO UP ROLLERS). 7 DRYING CYLINDERS MOD. ZT + 2 DRYING CYLINDERS FITTED BETWEEN THE TWO SIZING BOXES FOR PRELIMINARY DRYING (SERIAL N.122510119). 1 SECTIONAL BEAM UNWINDING BREAKER. UNWINDING CONTROL MOD. AB. MOISTURE CONTROL BY MAHLO (TEXTOMETER RMS + ELOTEX DMA). DUST SUCTION APPARATUS (NOT ORIGINAL SUCKER). VOLTAGE 380 V - PREPARATION SIZING KITCHEN . MOD. TK (600 LT) - (SERIAL N.1270131) 2 TANKS (800 LT). - MAJOR SPARE PARTS (ORIGINAL SUCKER). 1 HEAD ROLLER 2700 MM 2 PRESSURE ROLLERS MOD. DYCO 1 PRESSURE ROLLER 1 LATERAL PRESSURE ROLLER 1 SIZING PUMP 15 WARPING BEAMS WORKING WIDTH 1800 MM. IN AUGUST 2002 THE ENTIRE MACHINE HAS UNDERGONE A COMPLETE INTENSIVE REVISION AND RECONDITIONED. MANY MECHANICAL AND ELECTRICAL PARTS HAVE BEEN CHANGED WITH NEW PARTS PROVIDED DIRECTLY BY SUCKER AND FITTED WITH THE ASSISTANCE OF A TECHNICIAN FROM SUCKER MULLER COMPANY. THE ENTIRE ELECTRICAL CABINET HAS BEEN CHANGED. AIR JUNCTIONS AND TRANSMISSION WERE COMPLETELY CHANGED WITH NEW ONE. Learn More

REFERENCE NUMBER: M-4061 (990985DC8U) L DUSENBERY MODEL 835 DUPLEX CENTER SLITTER YEAR 1997 DUSENBERY MODEL 835 WEB WIDTH OF 72” THE 835 IS DESIGNED TO RUN MATERIALS SUCH AS .0005 PVCD THOROUGH 25 MIL RIDGE FILMS AND PAPER. MANUFACTURED DATE OF 1997 QUANTITY: 1 Learn More

REFERENCE NUMBER: M-1083

ROSIQUE MODEL AP 2082 CARDING MACHINES YEAR 1993

 

CARDING MACHINES

ROSIQUE

MODEL AP 2082

YEAR 1993

AUTOLEVELLER USTER

EXIT CAN 14” x 42”

CHUTE FEED ROSIQUE FROM NEU PROJECT

MACHINE WITH 8 TOP ROLLS (4 WORKER ROLLS AND 4 STRIPPING ROLLS)

REVOLVING FLAT WHIT 106 FLATS

380 VOLTS

50 HZ

 

QUANTITY: 7

Learn More

REFERENCE NUMBER: G-5886 CHICKEN SLAUGHTER LINE 6000 PER HOUR QUANTITY AVAILABLE: 1 Learn More

YY-2091 EDGE TRIM OPENERS, WORKING WIDTH 250 OR 500mm THE SPEED OF THE FEEDING UNIT AND WORKING ROLLERS IS CONTROLLED BY FREQUENCY INVERTER TO SYNCHRONIZE THE SPEED OF THE MACHINE TO THE LINE OR TO ADAPT TO THE PROCESSED RAW MATERIAL. THE MAIN ADAVANTAGES OF OUR EDGE TRIM OPENERS ARE A SOLID COMPACT DESIGN AND THE SAVINGS OF POST-PRODUCTION WASTES THAT CAN BE RECYCLED AND RE-USED. QUANTITY: 1 Learn More

J-3004 FIBRILLATED RAFFIA TAPE EXTRUSION LINE – NEW, 120mm PP FIBRILLATED YARN EXTRUDER LINE MODEL: NOVASTAR-120 EXTRUSION LINE FOR PRODUCTION OF PP FIBRILLATED YARN RAW MATERIAL: PP GRANULE FINISHED PRODUCTS: NON-TWISTED TAPE YARN, FIBRILLATED YARN FOR TWINE RANGE OF PRODUCT: 10,000 TO 30,000 DENIER 10000 DENIER APPROXIMATELY 17 TO 19 YARN 16000 DENIER APPROXIMATELY 11 TO 12 YARN 22000 DENIER APPROXIMATELY 8 TO 9 YARN 28000 DENIER APPROXIMATELY 6 TO 7 YARN 32000 DENIER APPROXIMATELY 5 TO 6 YARN EXTRUSION THROUGHPUT: 300 KG PER HOUR EXTRUSION CAPACITY: 180 TO 250 KG PER HOUR (PRODUCT CAPACITY DEPEND ON FILAMENT SIZE) EXTRUDER SCREW DIAMETER: Ø 120mm T-DIE WIDTH: 1300mm TAKE-OFF ROLLER WIDTH: 1200mm TAKE-OFF LINE SPEED: 160 METERS PER MINUTE (MAXIMUM) OPERATION SIDE: RIGHT TO LEFT, OR LEFT TO RIGHT Learn More

REFERENCE NUMBER: M-5271 (131341JKA12RL) L SOMET SUPER EXCEL JACQUARD LOOM YEAR 2003-2005 WIDTH 3400mm-3600mm SUPER EXCEL STAUBLI JACQUARD LX1600, 2400 HOOKS JC 5 CONTROLLER 4 WEFT ACCUMULATORS 9,000 DROPPERS 1.5 BEAM & CLOTH ROLLER QUANTITY AVAILABLE: 6 Learn More