Search results for: 'controls'

REFERENCE NUMBER: M-4918 (111175RS10U) L BRAUN 400# DYER/EXTRACTORS WITH TILT TO LOAD/UNLOAD YEAR 1993 400# BRAUN DYER/ EXTRACTORS WITH TILT TO LOAD/UNLOAD ALL YEAR 1993 480 VOLTS/3 PHASE/60HZ EACH UNIT HAS TWO SMALL STAINLESS STEEL DYE TANKS WITH MIXERS PLUS PUMP AND CONTROLS LOCATED ON THE BACK OF THE BRAUN TO SEND THE DYE LIQUID TO THE BRAUN AT THE PROPER STAGE OF THE DYE CYCLE AVAILABLE WITH THE BRAUNS IS A LARGE OVERHEAD GRAVITY-FED MONORAIL SYSTEM THAT MOVES SLINGS OF RUGS TO DYEING, EXTRACTION, DRYING, AND INSPECTION THEY DO NOT HAVE STANDARD BRAUN CONTROLLERS QUANTITY AVAILABLE: 20 Learn More

TRANSFER PRINTING RANGE, CONSISTING OF; A. JACK STAND AND STAINLESS J-SCRAY WITH EDGE SENSORS B. OPERATOR PLATFORM C. SINGER(?) TRANSFER MACHINE WITH 36" DIA. X 149" FACE WIDTH HOT-OIL CYLINDER INTERNALLY HEATED OIL BATH BY CHROMALOX ELECTRIC HEATING RODS, 126" FACE NOMEX BLANKET, CONTROLS. D. DSI A-FRAME WINDER, DIRECT COUPLING TO SPLINE SHAFT, 7.5-HP Learn More

REFERENCE NUMBER: A-1115 BRAZZOLI H.T. DYEING MACHINES TERRY TOWEL YEAR 2002 Brazzoli H.T. Dyeing machines, for terry towel fabrics. Type Saturno Luft HTF. Year 2002 Capacity 400kg each machine, these machines can also be operated coupled to dye one lot of 800kg. Supplied with main motor and pump, automatic valves for steam and water functions. Add tank + dosing pump. Electrical panel with Microprocessor controls. QUANTITY AVAILABLE: 2 Learn More

KNITTING, DYEING, FINISHING MILL #1 Learn More

SANFORIZING RANGE Learn More

REFERENCE NUMBER: M-1954 (770194EAS6RC) ARTOS BABCOCK STENTER FRAME YEAR 1990 WIDTH 3200mm ARTOS BABCOCK STENTER FRAME YEAR: 1990 WORKING WIDTH: 3200mm 9 CHAMBERS, GAS HEATED COMPOSED OF: HIGH FEEDING FRAME WITH FABRIC TENSIONER SS GUIDE ROLLER E&L PNEUMATIC CLOTH GUIDER TYPE KF20 3 BOWLS BETA FINISHING PADDER WITH IMPREGNATION BECK, YEAR 1997, TYPE FPC 3400 MAHLO WEFT STRAIGHTNER, WITH 6 READING SENSORS OPERATORS PLATFORM OVERHEAD INFORMATION BRIDGE WITH TEMPERTAURE CONTROLS AND MONITORS FOR QUALITY CHECK FABRIC ENTRY TO CHAIN WITH E&L EDGE GUIDING SYSTEM HORIZONTAL CLIP CHAIN 9 CHAMBERS SETTING AND DRYING OVEN FABRIC COMPENSATOR AT EXIT OF CHAMBERS MAHLO WEFT STRAIGHTNER AT EXIT WITH 4 SENSORS E&L ELSMART AT EXIT YEAR 1997 EXIT WITH BATCHER 380V, 50HZ QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-9834 GIUDICI RG-30TA AIR TEXTURIZER YEAR 1998 - 24 POSITIONS CAN PROCESS FDY, POY, ETC. AIR TEXTURIZER MANUFACTURER: GIUDICI ITALY MODEL: RG-30TA YEAR: 1998 INSTALLED IN 1999 WITH VERY LOW WORKING HOURS 24 POSITIONS SPEED UP TO 1,000 METERS PER MINUTE FOR SINGLE, PARALLEL, CORE EFFECT YARNS FOR POY OR FDY YARNS FOR POLYESTER, NYLON, OR POLYPROPYLENE FOR DENIERS 150 UP TO 3,000 WITH APPROPRIATE JETS HEAVY DUTY CREEL FOR UP TO 80 RUNNING ENDS SUPPLY PACKAGES UP TO 30 POUNDS PNEUMATIC THREADING YARN CUTTERS FOR ONE AND TWO ENDS ELECTRONIC YARN SENSORS ON THE CREEL FIRST SET OF HEATED GODETS 105mmɸ WITH SEPARATOR ROLLS SECOND SET OF HEATED GODETS 105mmɸ WITH SEPARATOR ROLLS STAINLESS STELL AIR JET BOX SOUND PROOF AND WATER PROOF WITH PLEXIGLASS COVERS WETTING NOZZLES 24 NEW JETS BY INTERNATIONAL MACHINERY SALES IMF WATER SUPPLY PIPING AND INDIVIDUAL SOLENOID VALVES WATER AND SPRAY EXHAUST SYSTEM THIRD GODET HEATED TO CONTROL SHRINKAGE AND OVERFEED TAKE UP YARN OILING SYSTEM BY KISS ROLL TAKE UP PACKAGE 250mm TRAVERSE BY 290mm DIAMETER INDIVUDAL AUTOMATIC DOFFING SYSTEM COMPUTERIZED CONTROLS TO OVERSEE: -MACHINE AND SHAFT SPEED -DRAW RATIOS INFINITELY -TAKE UP SPEED -TRAVERSE SPEED AND RIBBON BREAKING -WINDING ANGLE -WEIGHT OF EACH INDIVIDUAL TAKE UP PACKAGE -TEMPERATURE OF EACH GODET -ELECTRONIC YARN SENSORS STATUS MACHINE DIMENSIONS: LENGTH 7880mm, WIDTH 5305mm, HEIGHT 3350mm ELECTRICAL: 480/380/3/60-50 KW TOTAL DRIVE: 50.25 KW HEATING: 50.25 IN EXCELLENT CONDITION MACHINE WILL BE RECONDITIONED AND TESTED QUANTITY AVAILABLE: 1 Learn More

WEAVING MACHINES BENNINGER BEN DIRECT WARPER YEAR 2006 BEAM DIAMETER 1000mm, WIDTH 2200mm V-CREEL – 1024 ENDS, AUTOMATIC CUTTING AT CREEL CHANGE ELECTRICAL STOP MOTION, MECHANICAL TENSIONER MICROPROCESSOR CONTROL SUCKER MOENUS SIZING MACHINE YEAR 2006 SIZING MACHINE SUCKER MOENUS Z 14, WIDTH 3400mm 1000mm FLANG DIAMETER, 14 DRYING CYLINDERS 2 SOW BOXES, 2 DIP AND 2 NIP, 24 WARP BEAMS CREEL, FULLY AUTOMATIC PLC CONTROL SIZE MIXING COOLER, 1200 LITERS SIZE STORAGE VESSEL, 1200 LITERS STAUBLI DELTA AUTO DRAWING IN MACHINE YEAR 2006 AUTO DRAWING IN MACHINE, STAUBLI DELTA 110 3400mm, YARN MODULE (HM5), HEALD MODULE (HM2) REED MODULE (HM6), DROP WIRE MODULE (HM3) AND CONTROL MODULE JAYTEX WARP TYING MACHINE YEAR 2005 WARP TYEING MACHINE JAYTEX TROLLEY WITH TRANSFORMER WITH 2 NOS. TYING FRAMES SETIA KIJJI REED CLEANING MACHINE YEAR 2006 SETIA KIJJI – ULTRA SONIC CLEANING MACHINE REED CLEANER CONSISTS OF RINSING UNIT ULTRASONIC UNIT DRYING UNIT, SEMI AUTOMATIC PROCESS USING PLC. (18 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 EACH – 16 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI ELECTRONIC DOBBY 16 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (48 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 – 10 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 10 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (24 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 2E+06 – 6 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 6 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (2 UNITS) GREY INSPECTION MACHINE YEAR 2006 INSPECTION TABLE IS LAMINATED, PUSH BUTTON CONTROLS ARE GIVEN ON THE DRIVE BOX ON THE RIGHT HAND SIDE, CLOTH CAN RUN IN FORWARD AS WELL AS IN REVERSE DIRECTION FABRIC RUNS FACE IN/FACE OUT SPECIAL JOGGING OR INCHING DEVICE FABRIC FOLDING MACHINE YEAR 2006 SWINGING MOTION IS MINIMIZED TO ENSURE HIGH MACHINE CAPACITY AND INCREASE OUTPUT FOLDING BLADES ARE MOUNTED ON A CARRIAGE WHICH HAS A TO AND FRO MOVEMENT ACHIEVED BY SPECIAL STEEL ROLLER CHAIRS BALE PRESS YEAR 2001 BATH BEI HYDRAULIC BALE PRESS MACHINE FABRIC PROCESSING SINGEING MACHINE YAMUNA SINGEING MACHINE WIDER WIDTH – YEAR 2006 (2 UNITS) HYDRAULIC JIGGER KUSTER CALICO YEAR 2006 3E+06 VERTICAL DRYING RANGE YEAR 2006 CONTINUOUS DYEING RANGE – KUSTER CALICO KUSTER CALICO COLD PAD BATCH YEAR 2006 HARISH STENTER – SUPRA 5 DLXI ALMAC FINISH INSPECTION MACHINE YEAR 2006 SHRI NARAYAN COTEX FINISH PLAITING MACHINE YEAR 2006 Learn More