Search results for: 'NEEDLE+L'

REFERENCE NUMBER: V-1848 BARUDAN EMBROIDERY MACHINE, LOCKSTITCH, BENSMEZN - A20, 20 HEAD, YEAR 1998 9 NEEDLES PER HEAD (COLORED THREADS HOOPS-HAT HOOPS (EXTRA PARTS) 3 PHASE YEAR: 1998 LOCKSTITCH STITCHING FIELD: 11.5 X 11.5 VERY GOOD CONDITION Learn More

REFERENCE NUMBER: T-6973 LAFER GRV-90 DUPLEX ITALY- DOUBLE DRUM RAISING MACHINE, WORKING WIDTH 1800mm LAFER GRV-90 DUPLEX ITALY- DOUBLE DRUM RAISING MACHINE CONDITION IS LIKE NEW WITH LOW WORKING HOURS/NEEDLES JUST NEWLY CHANGES 24 + 24 RAISING CYLINDERS WORKING WIDTH: 1800mm AC MOTORIZATION: 380V 50Hz + INVERTERS FOLDER AT EXIT BOTH MACHINES ARE STILL MANUFACTURING ON THE MILL FLOOR Learn More

MAINLY USED FOR VISUAL FIELD TESTING OF MASKS AND RESPIRATORS, WHICH IS USEFUL FOR MASK AND RESPIRATOR MANUFACTURERS, QUALITY SUPERVISORS, SCIENTIFIC RESEARCH, AND FOR TESTING PRIOR TO SELLING MASKS.

FEATURES:
1. THE EQUIPMENT IS COMPOSED OF A SEMI-ARC BOW, RECORDING DEVICE, SEAT FRAME AND TEST HEAD DIE.
2. SEMI-ARC BOW: THE RADIUS IS 300 TO 340 mm
CAN BE ROTATED AROUND THE HORIZONTAL RADIUS PLANE PASSING THROUGH THE POINT 0°, AND A SCALE EXTENDING TO THE 90° ARC BOW EVERY 5° FROM 0° ON BOTH SIDES, EQUIPPED WITH SLIDING WHITE VISUAL STANDARD.
3. RECORDING DEVICE: THE RECORDING NEEDLE IS CONNECTED WITH THE VISUAL STANDARD THROUGH COMPONENTS SUCH AS AXLE WHEEL, AND THE DIRECTION AND ANGLE OF THE VISUAL STANDARD ARE RECORDED ON THE VISUAL FIELD DRAWING CORRESPONDINGLY.
4. SEAT FRAME: USED TO SUPPORT SEMI-CIRCULAR ARC BOW AND FIXED RECORDING DEVICE.
5. TEST THE HEAD MOLD: A STANDARD HEAD MOLD, THE TWO EYE HOLES OF THE HEAD MOLD ARE EQUIPPED WITH SMALL LIGHT BULBS, THE POSITION OF THE BULB AND THE POSITION OF THE HEAD MOLD ARE ACCORDING TO THE REQUIREMENTS OF GB 2890. THE TEST HEAD DIE MUST BE INSTALLED ON THE WORKBENCH IN SUCH A WAY THAT THE LEFT AND RIGHT EYES ARE PLACED AT THE CENTER OF THE SEMICIRCULAR ARCH AND THE "0" POINT IS DIRECTLY SEEN.

MAIN INDICATORS
1. SEMI-CIRCULAR ARC RADIUS: 335mm.
2. LEFT AND RIGHT FIELD OF VIEW: ≤120°.
3. BULB DISTANCE: THE VERTEX OF THE BULB IS CONNECTED AFTER THE TWO EYE POINTS (7±0.5).
APPLICABLE STANDARDS: GB/T 32610-2016, GB 2626-2019, GB2890-2009

Learn More

COMPLETE CUT PRESSSER PLANT

 

14 MACHINES ARE 168”

3 MACHINES ARE 84”

ALL MACHINES ARE 14 GAUGE

ALL BEAM SHAFTS ARE 4.5” = 114mm

UNOFFICIALLY, WE HAVE SEVERAL BOOKS OF DESIGNS WE PRODUCED OVER THE YEARS

THERE ARE ABOUT 30-40 CHAINS MADE UP ALREADY

4 MACHINES FIT IN ONE CONTAINER

THE WHOLE PLANT CAN FIT IN FIVE FORTY FOOT (40’) CONTAINERS

 

EXCESS OF 10,000 LINKS (COULD BE 20-25,000)

MANY MADE UP PATTERN CHAINS

CUT PRESS CUTTER

SEVERAL BLANK 168” PRESSES

2-3 EXTRA 84” MACHINES FOR PARTS

ANYTHING ELSE IN PLANT PERTINENT TO CUT PRESS

 

ALL MACHINES ARE SPRING BEARD NEEDLE, SO TO CHANGE THE GAUGE YOU WOULD NEED:

(THIS CHANGE IS NOT INCLUDED)

• INSERTS (10 PER 168” MACHINE)
• ADDITIONAL NEEDLES
• SINKERS
• GUIDES
• SLAY POINTS
• CORRECT GAUGE LINKS

 

QUANTITY: 1 PLANT CONSISTING OF 17 MACHINES

 

 

 

 

PLANT IS OFFERED LOADED ON CONTAINERS, IT IS NOW ON THE MILL FLOOR

ALL THE MACHINES WILL BE COMPLETE AND CHECKED OUT BEFORE LOADING

Learn More

REFERENCE NUMBER: R-6814 

LIROPOL TOWEL KNITTING MACHINES, RIUS WARPER, CREELS

 

(2) X LIROPOL TOWEL KNITTING MACHINES – RUNNING,

MODEL 114133 – YEAR 1994

MACHINE WIDTH 2500mm

GAUGE 12  (NEEDLES PER INCH) 

(1) X RIUS WARPER MODEL A-3 30/30

 

(1) X CREEL WITH STOP MOTION 260 POSITIONS – FOR COTTON

 

(1) X CREEL FOR WARPER 260 POSITIONS, FOR POLYESTER YARN, WITH HYDRAULIC TENSION CONTROL

 

(60) X ALUMINUM WARP BEAMS FOR COTTON 21 x 30

 

(30) X WARP BEAMS, 21 x 21 FOR POLYESTER

 

(1) X MOTORIZED PLATFORM FOR RIUS WARPER

Learn More

A-2100 MURATA VORTEX SPINNING MVS870, YEAR 2001, 96 SPINDLES, 50 HZ

MODEL: MVS870
YEAR: 2011
VOLTAGE: 380V / 50 Hz
96 SPINDLES
(1) LEFT HAND WITH PACKAGE CONVEYOR
RIGHT TO LEFT, WITH PACKAGE LIFTER
(1) RIGHT HAND WITH PACKAGE CONVEYOR
LEFT TO RIGHT, WITH PACKAGE LIFTER
YARN CLEARER
MSC-F (WITH FOREIGN FIBERS DETECTION
PACKAGE: 6” PARALLEL
WAXING DEVICE
1 SET OF ORIENT NOZZLES – Z TWIST/MACHINE
1 SET OF ORIENT NEEDLE HOLDERS/MACHINE
1 SET OF ORIENT MIDDLE SPINDLES/MACHINE
1 SET OF ORIENT FINE SPINDLES/MACHINE
3 SPLICING CARRIAGES/MACHINE
1 AUTODOFFER/MACHINE
AUTOMATIC WASTE FIBER EXTRACTION
OVERHEAD BLOW CLEANER/MACHINE

QUANTITY: 2

Learn More

REFERENCE NUMBER: M-4822 (11115FRFM10R) L FEHRER PRENEEDLE LOOM 4000mm PRE NEEDLE LOOM FEHRER 4000mm WIDE WITH 3 BOARDS + 3 SPARE BOARDS TOTAL 9,000 NEEDLES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-7999 LONATI SOCK MACHINE YEAR 2004 MAKER: LONATI MODEL: G615 S2000 YEAR 2004 SINGLE CYLINDER 14 GAUGE DIAMETER: 3 3/4 GG: 14 NEEDLES: 4 MACHINES: 144, 3 MACHINES: 156 EXCELLENT CONDITION QUANTITY AVAILABLE: 7 Learn More

REFERENCE NUMBER: M-0902 LONATI MONO CYLINDER HOISERY MACHINES LONATI MONO CYLINDER DIAM. NEEDLES YEAR N. 30 L 454 J EURO 3.000 EACH 4” 108 1992/1993 N. 20 L 454 JR EURO 5.500 EACH 4” 120 1997 N. 10 L 454 P EURO 5.000 EACH 4” 108 1999 N. 5 L 454 J EURO 6.000 EACH 4” 108 1999 /2000 N. 8 L 454 J EURO 6.500 EACH 4” 168 / 216 2000/ 2001 N. 10 L 454 P EURO 5.000 EACH 4” 200 / 240 2000/ 2001 QUANTITY AVAILABLE: 6 Learn More

REFERENCE NUMBER: M-4755 (111195DBJ10RL) L BABCOCK STENTER YEAR 1991 WIDTH 2000mm – 8 CHAMBERS (1) X BABCOCK STENTER – 5000 – 5800 TYPE YEAR 1991 8 CHAMBERS (TOTAL LENGTH OF THE DRYING TUNNEL MT. 24 WORKING WIDTH 2000mm BLOWERS MODEL JET-STAR WITH AIR CIRCUIT CIRCULATION TYPE ECON-AIR POSSIBILITY TO ADJUST AIR FLOW INDEPENDENTLY UPPER AND BELOW GAS HEATING SYSTEM HORIZONTAL PIN CHAIN CONICAL INPUT FIELD LENGTH MT. 3.5 TOTAL OVERFEEDING FOR NEEDLE CHAIN (+50%) ENTRY WITH E+L CONICAL FIELD REGULATOR MODEL KR-40 WITH FR1501 PHOTOCELL FEELER GROUP BIG ROLL ARM DEVICE FOR FABRIC OUTPUT ON A-FRAME TROLLEYS SPEED ADJUSTABLE FROM 7.5 TO 150 MT/MIN MACHINE IS PROVIDED OF: (1) X BABCOCK IMPREGNATING/SQUEEZING PADDER – 5805 TYPE 2 CYLINDERS WITH ROLLER WIDTH 2000mm (WORKING WIDTH 1850mm) STAINLESS STEEL IMPREGNATING THROUGH - 2 STAINLESS STEEL EXTERNAL TANKS WITH MIXER D.C. DRIVE WITH SYNCHRONIZATION (1) X MAHLO WEFT STRAIGHTENER RFMC TYPE – 4 OPTICAL HEADS (1) X VACUUM EXTRACTOR WITH FILTER AND WATER RECOVERY – VACUUM PUMP WITH 30HP POWER – TO EXTRACT WATER FROM DELICATE FABRIC BYPASSING THE SQUEEZING PADDER QUANTITY AVAILABLE: 1 Learn More