Search results for: 'heat+press''

PS-90P POCKET SPRING MACHINE COMPUTERIZED OPERATION SYSTEM REMOVABLE INDEPENDENT HEAT TREATMENT DEVICE CHANGEABLE VERTICAL SPRING TRANSFER STRUCTURE VARIOUS CUSTOMIZED ULTRASONIC WELDING SEAM LOW AND EASY MAINTENANCE, ECONOMICAL INVESTMENT PERFORMANCE: 48 SPRINGS/MIN SPRING TYPE: BARREL/CYLINDRICAL AIR CONSUMPTION: APPROXIMATELY 30M3/H AIR PRESSURE: 0.6 TO 0.7 MPA POWER CONSUMPTION IN TOTAL APPROXIMATELY 10KW VOLTAGE: 3AC, 380V – FREQUENCY: 50/60HZ POWER REQUIREMENTS: INPUT FUSE: 25A – CABLE SECTION: 4 X 10mm2 WORKING TEMPERATURE: +5°C +45°C WEIGHT APPROXIMATELY 1800KG NON-WOVEN FABRIC CONSUMPTION MATERIAL DATA FABRIC DENSITY: 45~90G/M2 FABRIC WIDTH: 450 TO 600mm INNER DIAMETER OF FABRIC ROLL MINIMUM 60mm OUTSIDE DIAMETER OF FABRIC ROLL MAXIMUM 600mm STEEL WIRE CONSUMPTION MATERIAL DATA WIRE GAUGE: 1.6 TO 2.2mm INNER DIAMETER OF WIRE ROLL MINIMUM 320mm OUTSIDE DIAMETER OF WIRE ROLL MAXIMUM 1000mm ACCEPTABLE WEIGHT OF WIRE ROLL MAXIMUM 800KG WORKING RANGE STANDARD OPTION 1 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 80~140 STANDARD OPTION 2 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 100~160 STANDARD OPTION 3 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 120~180 STANDARD OPTION 4 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 140~200 STANDARD OPTION 5 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 80~140 STANDARD OPTION 6 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 100~160 STANDARD OPTION 7 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 120~180 STANDARD OPTION 8 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 140~200 SPECIAL OPTION 1 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 200~240 SPECIAL OPTION 2 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 240~260 Learn More

REFERENCE NUMBER: M-4136 SANTEX TENTER FRAME YEAR 2003-UP TO 3400mm – 3 ZONE – VERTICAL PIN – HOT OIL TYPE: SANTEX TENTER FRAME YEAR: 2003 WORKING WIDTH: 800mm UP TO 3400mm SPEED: 2 UP TO 20 M/MIN CHAIN: VERTICAL PIN CHAIN DRYER: 3 COMPARTMENTS DRYER LENGTH: 6 METERS MAX. TEMP.: 230° C HEATING: DIATHERMIC OIL OIL BOILER: GARIONI NAVAL TH 500 CAPACITY: 581 KW, MAX. TEMP. 350° C, NITROGEN COVERED TOTAL LENGTH NEEDED: APPROX. 20,000mm TOTAL WIDTH OF MACHINE: 6,200mm TOTAL HEIGHT OF MACHINE: 3,100mm ENTRY COMBINATION GUIDING CHAIN FOR A-FRAMES CORRECT POSITIONING RUBBERIZED ROLLERS AS INFEED UNIT WECO IMPREGNATION UNIT, CONTROL AND TANK ROLLER WITH LOAD CELL MAHLO WEFT STRAIGHTENER, TYPE: RFMC-10A 6 MEASURING HEADS, WW 4200mm OPERATION PEDESTAL OPERATION PANEL, MONITOR 1 UPPER INFEED ROLLER + 1 BENDED ROLLER E+L FABRIC INFEED VERTICAL PIN CHAIN 3 SECTIONAL DRYER (6 M) COOLING UNIT AT EXIT 2 CAMERAS VIDEO CONTROL STRETCH WORK: 2 PRESSING ROLLERS 3 HEATED DRAG ROLLERS WITH SINGLE DRIVE TEMPERATURE 80° C TO 250° C ON-WINDING UNIT FOR A-FRAMES ELECTRICAL CABINET QUANTITY AVAILABLE: 1 Learn More

MACHINE FEATURES: - WITH NC SERVICE ROLLER, AUTOMATIC ADDING OIL DEVICE, BACKING YARN STORAGE DEVICE, DEVICE YARN NEEDLE, YARN COLLECTING PLAT AND AUTO STOP DEVICE. -THE MAIN MOTOR IS CONTROLLED BY INVERTER AND PLC. -THE CREEL IS CONTROLLED BY PNEUMATIC, AND ITS POSITION IS ACCURACY CONTROLLED BY PHOTOELECTRIC SENSOR AND THE PLC AUTOMATICALLY. -THE MAIN BRAKE ADEPTS PNEUMATIC BUTTERFLY BRAKE. THE BREAKING TRAY WITH MIDDLE UNOCCUPIED HAS A NICE HEAT-DISSIPATED FUNCTION. ON THE OTHER HAND, THE USING OF BREAK PINCER WITH AUTO-COMPENSATION AND THE HOOFED PIECE MAKES THE BUTTERFLY BRAKE STABLE AND LAST A LONG LIFE. -THE BRAKE OF POSITIVE ROLLER AND SPEED ROLLER CAN MAKE DIFFERENT BRAKE PRESSURES ACCORDING TO DIFFERENT SPEEDS (MORE THAN 200 M/MIN). THESE DIFFERENT PRESSURES, TOGETHER WITH THE MAIN BEAM BREAK, GUARANTEES THE YARN TENSION IN THE BREAKING TIME IS THE SAME AS THE TENSION UNDER THE CONSTANT SPEED. -WITH TOUCH SCREEN. ALL THE ELECTRICAL TROUBLES AND WRONG OPERATION INFORMATION ARE DISPLAYED ON THE SCREEN. THE PNEUMATIC PART, AORTIC, IS MADE IN TAIWAN. -THE POSITIVE ROLLER IS COVERED BY HIGH-HARDNESS COATING, SO THE SMOOTH SURFACE IMPROVES THE ABSORPTION TO THE YARN. THE AC HIGH-SPEED SERVO SYSTEM PROVIDES A POWER TO THE ABOVE ROLLER, MATCHING WITH THE PLC, BOTH OF WHICH SERVICE FOR THE MAIN WINDING SYSTEM, TO ENSURE THE CONSTANT TENSION OF YARN. -WITH REMOTE DEBUGGING TO MONITOR THE CURRENT WORKING CONDITIONS. CONSISTS OF: (1) COMPUTER CONTROLLED COPY WARPING MACHINE FOR 30”X42” INCH AND 21”X42” BEAM (2) ROTATION OPEN CREEL WITH 1400 POSITIONS AND KFD OIL HYDRAULIC TENSIONER (1) COMPUTER CONTROLLED COPY WARPING MACHINE FOR 30”X42” INCH AND 21”X42” BEAM TECHNICAL DATA: LINE SPEED 0 TO 1000M/MIN MAX. TENSION OF LINE 1000N BRAKE TORQUE 3200NM UP AND DOWN OF BEAM PNEUMATIC CONTROL TIGHT AND RELEASE OF BEAM PNEUMATIC CONTROL DIAMETER OF SPEED ROLLER Ø120mm POWER OF MAIN MOTOR 15KW CONTROL TYPE OF MAIN MOTOR INVERTER CONTROL MONITORING WAY IMMEDIATE MONITOR BY MICROCOMPUTER CONTROLLED TOUCH SCREEN CONTROL TYPE OF POSITIVE YARN-SEND ROLLER AC HIGH-SPEED SERVO CONTROL SYSTEM OF MITSUBISHI DIAMETER OF POSITIVE YARN-SEND ROLLER Ø100mm PRESSURE OF PNEUMATIC SOURCE 6 BAR MAIN PARTS： MAIN MOTOR SIEMENS OF GERMANGY HIGH-SPEED SERVO SYSTEM MITSUBISHI OF JAPAN CONVERTER EMERSON OF USA TEST COMPONENTS A AUTONICS OF SOUTH KOREA TEST COMPONENTS B KOYO OF JAPAN PNEUMATIC COMPONENTS AIRTAC OF TAIWAN PLC OMRON OF JAPAN TOUCH SCREEN MCGS OF BEIJING OPERATING COMPONENTS SCHNEIDER OF FRANCE TERMINAL COMPONENTS PHOENIXCONTACT OF GERMANGY BEARING NSK OF JAPAN (2) ROTATION OPEN CREEL WITH 1400 POSITIONS AND KFD OIL HYDRAULIC TENSIONER MAJOR PARTS: 1. MOTOR 2. ROLLER SPEED DETECTOR 3. CONTROL PANEL 4. REED 5. SIZING PARTS 6. LUBRICATING DEVICE 7. YARN STORAGE 8. TENSION ROLLER 9. STATIC ELIMINATOR 10. NEEDLES 11. YARN COLLECTING BOARD DELIVERY TIME: 37-45 DAYS Learn More