Search results for: 'control panel''

REFERENCE NUMBER: F-1428

FEATHER FILLING MACHINE MODEL SR-2

PRODUCT FEATURES

•             FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•             AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•             FILLING TIME IS 2 TO 5 SECONDS

•             NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•             CE CERTIFICATE

 

•             ITEM NO.: SR-2

•             DIMENSION: APPROX. 11000 x 2500 x 3000MM

•             VOLTAGE: 200/380415V 50/60HZ 3PHASE

•             POWER: 13KW

•             FILLING RANGE: 2 TO 100 G, DEPENDING ON THE MATERIAL

•             ACCURACY: ±1G

•             AIR PRESSURE: 0.5-0.8MPA

•             THERE ARE 4 WEIGHING SYSTEMS AND ONE WORKING TABLE FOR DOWN FEATHER

•             IT IS MAINLY USED TO MAKE DOWN FEATHER QUILT

•             IT INCLUDES TWO AUTOMATIC FILLING TABLES, THE WORKING TABLE INCLUDES PNEUMATIC CLAMPING DEVICE FOR TWO FILLING PIPES, COMPOUND SHOE CLAMPING DEVICE, RING CLAMPING DEVICE AIR SUCTION, COMPRESSED AIR RING INJECTOR

•             THE FEATHER DOWN FILLING USES VACUUM METHOD STYLE FUNCTION THAT HELPS TO KEEP THE MATERIAL SOFT, ELASTIC AND HAND FEELING AND AVOIDS THE FEATHER BEING DAMAGED DURING THE FILLING PROCEDURE

•             WEIGHING ACCURACY CAN BE CONTROLLED WITHIN 1 GRAM WHICH CAN BE ADJUSTED BY SINGLE SET OR SINGLE PIECE ACCORDING TO DIFFERENT REQUIREMENT OF DIFFERENT PRODUCTS.

THIS HELPS QUALITY CONTROLLING AND AVOIDS MATERIAL WASTE ALSO

 

 

 

•             SIMPLE OPERATION THAT SAVES LABOR COST AND THE WHOLE SET CAN BE HANDLED BY ONE OPERATOR.

•             WORKING SURROUNDINGS ARE KEPT CLEAN BECAUSE ALL FILLING MATERIALS ARE KEPT INSIDE OF THE HOPPER

•             ADVANCED TECHNOLOGY LEVEL; THE WHOLE SET IS CONTROLLED BY PLC SYSTEM WITH AN ENGLISH OPERATION MENU WHEREIN 100 RECIPES CAN BE SET UP, EACH RECIPE CAN BE SET UP WITH ABOUT 80 SETS OF WEIGHT VALUE WHICH IS SUITABLE FOR VERY COMPLICATED PRODUCT DESIGN WITHIN ONE PIECE

•             HIGH WORKING CAPACITY; THE AVERAGE MATERIAL MEASURING TIME IS 4 TO 6 SECONDS. THE FILLING TIME CAN BE ADJUSTED AS DESIRED SO THAT TWO FILLERS CAN BE HANDLED BY ONLY ONE OPERATOR.

•             WITH OUR PROFESSIONAL R&D GROUP WE CAN DESIGN THE INDIVIDUAL FILLINGS ACCORDING TO YOUR REQUIREMENTS

 

EQUIPMENT INCLUDED:

 

•             MATERIAL HOPPER: DIA.1700 x 2500        1PCS

•             WEIGHING SYSTEM: 800 x 1000 x 1200MM           2PCS

•             PLC CONTROL SYSTEM & CONTROL PANEL:           1 SETS

•             MATERIAL CHANGING HOPPER: 1200 x 1200 x 2500MM  1PCS

•             AIR HOPPER: 1200 x 1200 x 2500MM        1PCS

•             MATERIAL FEEDER: 1200 x 1200 x 1200MM            1PCS

•             BLOWER:             4PCS

•             PIPE:      1SET

•             AUTOMATIC WORKING TABLE:  2SETS

•             ENGLISH EDITION ARTICLE AND VIDEO FOR OPERATION DESCRIPTION

Learn More

REFERENCE NUMBER: M-4010

10 MW BIOGAS TO STEAM CONGENERATION PLANT – 10 MEGAWATTS

 

10 MW BIOGAS-FIRED COGENERATION PLANT

   LATE MODEL, EXCELLENT CONDITION

    INCLUDES BOILER, STEAM TURBINE, GENERATOR AND CONDENSER

    CAPABLE OF CONVERTING METHANE, LANDFILL GAS, BIOGAS OR NATURAL GAS INTO ELECTRICITY

    COMPLETE WITH ALL SUPPORT EQUIPMENT, INCLUDING PUMPS, WATER SYSTEMS, BLOWERS, ETC.

    COMPLETE CONTROL ROOM AVAILABLE WITH OPERATIONAL CONTROL PANELS FEATURING CONTROLS BY PANALARM, FOXBORO, BENTLY NEVADA AND BASLER

    STARTERS AND SWITCH GEAR BY SIEMENS

    BOILER:

        125,000 LBS/HR @ 725 PSI DELTAK FIRE TUBE STEAM BOILER

        16,189 SQ. FT. HEATING SURFACE

    STEAM TURBINE:

        101,000 LBS/HR @ 600 PSI TERRY MULTI-STAGE CONDENSING STEAM TURBINE

        INCLUDES WOODWARD GOVERNOR AND TACKE GEAR REDUCER

    GENERATOR:

        10,200 KW IDEAL ELECTRIC

        1,800 RPM, 60 HZ

        INCLUDES BRUSHLESS EXCITER

    CONDENSER:

        7,809 SQ. FT. GRAHAM SHELL AND TUBE HEAT EXCHANGER

        CS AND ADMIRALTY BRASS CONSTRUCTION

        88,100 LBS/HR EXHAUST

        86 MM BTU/HR DUTY

Learn More

REFERENCE NUMBER: C-4330
FARREL 4LMSD COMPOUNDING LINE, 500 VOLT, CAPACITY 1500 LB/HOUR

FARREL SIZE 4LMSD CONTINUOUS MIXER
1750 RPM DC MOTOR THRU A LUFKIN MODEL S64CH GEARBOX
LUWA MAAG VACOREX MODEL 90/90 GEAR PUMP
FARREL UP-150 HOT OIL HEATED DIE FACE PELLETIZER
BERINGER
GALA SPIN DRYER
GALA 60 GPM WATER SYSTEM
GALA
STERLCO HOT OIL TEMPERATURE CONTROL UNIT
K-TRON WEIGH BELT FEEDER
K-TRON T35 FEEDER
K-TRON S200 FEEDER
(1) 220 KVA
(1) 75 KVA
(1) 63 KVA TRANSFORMERS
AND (2) CONTROL PANELS
PLATFORM
CAPACITY: 1500 LB/HOUR
ABLE TO DO FILLER COMPOUNDING
MASTERBATCH COMPOUDING

QUANTITY: 1 LINE

Learn More

C-4227 EREMA RM120TVE FILM/FIBER PELLETIZING LINE, EXTRUDER 120mm, YEAR 2000 - NEW

EREMA PELLETIZING LINE NEW
MODEL: RM120TVE FILM/FIBER
YEAR: 2000
LINE CONSISTS OF THE FOLLOWING:
EREMA MODEL RM120TVE
120mm EXTRUDER WITH 36/1 L/D DOUBLE VENTED BARREL
EXTRUDER IS DRIVEN BY A 160KW AC MOTOR WITH INVERTER
DOUBLE VENT INCLUDES A STAINLESS STEEL DEKER VACUUM PUMP
APPROXIMATELY 50 CUBIC FOOT STAINLESS STEEL CUTTER/COMPACTOR MOUNTED AT FEED SECTION
AND FED BY A 35″ WIDE X 20′ LONG INCLINED BELT CONVEYOR
CUTTER COMPACTOR DRIVEN BY A 105 KW
480 VOLT AC MOTOR

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: M-6097
AUTOMATIC ELASTIC BANDAGE ROLLING EQUIPMENT

FOR AUTOMATIC ROLLING AND METERING OF ELASTIC BANDAGE LIKE ELASTIC CONFORMING BANDAGE, COMPRESSION BANDAGE, ELASTIC CREPE BANDAGES, COTTON CREPE BANDAGE, AND ETC.

IT HAS 2 PRODUCTION TRACKS. EACH TRACK CAN HANDLE THE MAXIMUM INPUT WIDTH OF 20CM.
PRODUCTION CAPACITY IS 15 TO 30 METERS PER MINUTE (ADJUSTABLE).

Learn More

M-6060 BEMATIC T-MAX WEB FORMING LINE, WORKING WIDTH 1500mm TO 2600mm, YEAR 2014

OFFER 001
BEMATIC WEB FORMING LINE
MAKE: BEMATIC
YEAR: 2014
CAPACITY: 500 KG PER HOUR

OFFER 002
BALE OPENER
WORKING WIDTH: 2000mm

OFFER 003
PIN ROLL OPENER
WORKING WIDTH: 1800mm

OFFER 004
FINE OPENER
WORKING WIDTH: 1500mm

OFFER 005
BEMABLOW
WORKING WIDTH: 2500mm

OFFER 006
T-VALVE + FANS

OFFER 007
T-MAX FORMER
WORKING WIDTH: 2600mm

OFFER 008
BEMAMULTISCALE
WORKING WIDTH: 2600mm

OFFER 009
ELECTRICAL CONTROL PANEL AND OPERATOR CONTROL BOARD

OFFER 010
FILTER WITH FOUR BAGS

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: P-1232 NOWO BLOW FIBRE FILLING LINES YEAR 2004/2006 CYCLONE WITH 2 DUST BAGS NOWO BLOW FIBRE FILLING LINES YEAR: 2004 CYCLONE WITH 2 DUST BAGS SILO IMS500 SPRAY 50 BALL FIBRE MACHINE EXCLUDING CONTROL PLC AND SCREEN – AVAILABLE FOR EXTRA COST LINE 1 SILO 500-3 YEAR 2004 WEIGHING UNIT YEAR 2004 BLOW FILLING STATION WITH TABLE LINE 2 SUITABLE FOR FEATHER AND FIBRE SILO IMS 1000 YEAR 2006 WEIGHING UNIT YEAR 2004 BLOWING STATION WITH TABLE BLENDING MACHINE MIXING CHAMBER BS 8 FOR FEATHER and POLYESTER YEAR 2006 FIRE RETARDANT APPLICATOR * THE BALL FIBRE MACHINE (ROTOR AND CYCLONE) INCLUDES THE PANEL BUT EXCLUDES THE TOUCH SCREEN AND PLC AS THESE CONTROL ANOTHER ROTOR WHICH THE CUSTOMER IS RETAINING. WE CAN SUPPLY A NEW PLC AND SCREEN (EXTRA PRICE) OR YOU CAN DO IT IN-HOUSE IT DOES NOT INCLUDE A BALE OPENER OR PRE-OPENER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-2459 FEHRER AIRLAY NONWOVEN LINE, WIDTH 2200mm, YEAR 1992 SPECIFICATIONS: 1 PC. AIRLAY NONWOVEN LINE FEHRER V 21 K 12 2200 MM WORKING WIDTH, YEAR OF CONSTRUCTION 1992, SECOND-HAND THE LINE IS CONSISTING OF: 1 PC. CHUTE FEEDER TEMAFA WITH CONDENSER. 1 PC. WEIGHTING UNIT KUKLA WITH CONTINUOUS BELT. 1 PC. FEEDING UNIT, CONTINUOUS BELT TYPE FEHRER - FEEDING V 21. 1 PC. WEB FORMING UNIT FEHRER V 21. 2200 mm WORKING WIDTH. 1 PC. AERODYNAMIC CARD FEHRER K 12, 2200 mm WORKING WIDTH. 1 PC. NEEDLE LOOM FEHRER NL 9 S, 2200 mm WORKING WIDTH. SINGLE BOARD DOWN STROKE MACHINE, 3000 NEEDLES/M. MAX. 1500 STROKES/MIN. WITH OUTLET ROLLERS. 1 PC. WINDER WITH LONGITUDINAL CUTTER. (NO CROSS CUTTER AVAILABLE.) 1 PC. COMPLETE DUST COLLECTION UNIT. THE V 21 K 12 LINE IS SUITABLE FOR A WEIGHT RANGE OF APPROX. 400 TO 2000 GR/SWM AND A CAPACITY OF UP TO 600 KG/H, DEPENDING ON FIBERS. THE CONTROL PANELS, FILTERS ETC. ARE IN A GOOD CONDITION. 1 PC. RANDOM CARDING MACHINE FEHRER K 12 (REF. NO. 2133817). 2300 mm WORKING WIDTH, YEAR OF CONSTRUCTION UNFORTUNATELY NOT KNOWN. WITH OPENING MACHINE K 12. WITH ONE ASSELIN NEEDLE LOOM MODEL 169, STROKE HEIGHT 0-30 MM. 2.800 mm WORKING WIDTH. WITH ONE FEHRER NEEDLE LOOM NL 12, 1200 STROKES/MIN. 60 mm STROKE HEIGHT, 2.400 mm WORKING WIDTH. INCL. CUTTING AND ROLLING SECTION. THE LINE CONSISTS OF K 12 SECTION ONLY. V 21 SECTION IS NOT INCLUDED. PREVIOUSLY USED FOR 200 TO 2000 GR/SQM. THE MINIMUM IS 200 GR/SQM. MAINLY USED TO PRODUCE HIGH QUALITY MATTRESS MATERIAL IN A SQM-RANGE OF 300-1200 G/SQM MADE FROM JUTE FIBRES. IN GENERAL ALMOST ALL TYPES OF FIBERS CAN BE PROCESSED. IT IS A GOOD MACHINE FOR NATURAL FIBERS. 1 PC. AIRLAY LINE ROLANDO / FEHRER V21/K12 (REF. NO. 2226950). 4400 MM WORKING WIDTH. THE LINE IS CONSISTING OF: - HOPPER FEEDER ROLANDO, CASTING IRON. - CHEMINEE FEEDER WITH AUTOMATIC REGULATED FEEDING ROLANDO. - SQUARE METER MEASURING UNIT AND CONTROL SYSTEM MADE BY FEHRER TYPE E-PW. - OPENER FEHRER V 21, 4400 MM WORKING WIDTH. - RANDOM CARDING MACHINE FEHRER K 12, 4400 MM WORKING WIDTH. THE LINE HAS WORKED ON 1000 GR / SQM AND UP. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8016 FALCON DOUBLE NEEDLE CONTINUOUS QUILTING MACHINE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-4611 LINE VACUUM FOR PILLOWS AND QUILTS SMALL PLANT FOR BAGGING, VACUUM PRESS AND ROLL PILLOWS. IN THE LINE YOU INSERT CUSHIONS FIBER, LATEX AND POLYURETHANE OF VARIOUS DENSITIES, SHAPES AND SIZES, AS WELL AS DUVETS, QUILTS, ETC. WITH VOLUME REDUCTION UP TO MINUS (NEGATIVE) 70 PERCENT. QUANTITY AVAILABLE: 1 Learn More