Search results for: 'Can coi'
-
G-8230 HIGH-TEMPERATURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KGREFERENCE NUMBER: G-8230
HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG
DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER
MACHINE TYPE: VERTICAL CYLINDER
VAT DIAMETER: Ф600mm
CONE QUANTITY: 7 X 7 = 49 CONES
WORKING TEMPERATURE: 130C
MAX WORKING PRESSURE: 0.4MPA
BOTH RATIO: 1:7 TO 9
WITH COMPUTERIZED CONTROL SYSTEM
HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.
HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20OC TO 130OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130OC TO 80OC.
RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.
SEALING OF BOILER: RUBBER ADHESIVE
THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.
OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.
CONFIGURATION:
1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING
2. ELECTRICAL COMPONENTS: SIEMENS, OMRON
3. COMPUTER: HG COMPUTER (MADE IN CHINA)
4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE
5. PUMP: CENTRIFUGAL PUMP
6. MOTOR: WANNAN MOTOR
7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.
8. HEAT EXCHANGER: INTERNAL COIL HEATING
9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES
10. ONE CARRIER BASKET
11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS
12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT
QUANTITY: 1
Learn More -
YY-2630 SPUHL TRANSFER MACHINE, MODEL FTA-120, 40000 SPRINGS PER SHIFTYY-2630 SPUHL TRANSFER MACHINE, MODEL FTA-120, 40000 SPRINGS PER SHIFT Learn More -
TT-2215 RIETER HIGH SPEED CARDING MACHINES, YEAR 2013 TO 2015TT-2215 RIETER HIGH SPEED CARDING MACHINES, YEAR 2013 TO 2015 EXCELLENT CONDITION STILL ON MILL FLOOR AND CONNECTED TO POWER QUANTITY: 6 SETS Learn More -
C-1454 TRUETZSCHLER TC 5-1 CARDS, CAN SIZE 24” X 44”,DFK 960 DIRECT FEED, YEAR 2013REFERENCE NUMBER: C-1454 TRUETZSCHLER TC 5-1 CARDS, CAN SIZE 24” X 44”,DFK 960 DIRECT FEED, YEAR 2013 DETAILS: TRUETZSCHLER TC 5-1 CARDS YEAR : 2013 CAN CHANGER : KH & KHC600 CAN SIZE: 24 X 44” COILER POSITION : LH CCD : AVAILABLE CFD : AVAILABLE STATIONARY FLAT AT FRONT : 12 STATIONARY FLAT AT BACK : 6 SUCTION : CONTINUOUS WIRE MAKE : TRUETZSCHLER CHUTE FEED TYPE : DFK 960 DIRECT FEED QUANTITY AVAILABLE: 2 Learn More -
C-1440 TRUETZSCHLER TC 5-1 CARDS, CAN SIZE 24X44”, YEAR 2013REFERENCE NUMBER: C-1440 TRUETZSCHLER TC 5-1 CARDS, CAN SIZE 24X44”, YEAR 2013 DETAILS: YEAR : 2013 CAN CHANGER: KH & KHC600 CAN SIZE : 24 X 44” COILER POSITION: LH CCD : AVAILABLE CFD : AVAILABLE STATIONARY FLAT AT FRONT: 12 STATIONARY FLAT AT BACK: 6 SUCTION: CONTINUOUS WIRE MAKE: TRUETZSCHLER CHUTE FEED TYPE: DFK 960 DIRECT FEED QUANTITY AVAILABLE: 2 Learn More
-
E-4258 POLYESTER PACKING TAPE MACHINE (FROM RECYCLED PET SCRAP)INVENTORY NUMBER: E-4258 POLYESTER PACKING TAPE MACHINE (FROM RECYCLED PET SCRAP): XDC TSE-65/32 PET PRODUCTION CONDITION: NEW 1. ELECTRICAL VOLTAGE: 380V/3P/50HZ OR AS PER CUSTOMER 2. MATERIAL: PET SCRAP 3. MAX. EXTRUSION OUTPUT: 350KG PER HOUR NOTE：PRODUCTION CAPACITY DEPENDS ON RAW MATERIAL AND OPERATION. 4. SPECIFICATION：WIDTH OF TAPE 9 TO 24 mm, THICKNESS: 0.5 TO 1.2 mm 5. LINE SPEED：80M/MIN 6. CENTER HEIGHT OF EXTRUDER: 1000 mm 7. OPERATION DIRECTION: FROM RIGHT TO LEFT 8. POWER REQUIREMENT: 212KW（APPROX. 127KW AT CONTINUOUS USAGE） 9. COOLING RECYCLE: ≤20℃ ≥0.3MPA ～2T/H 10. AIR CONSUMPTION: 0.4 CUBIC METER PER MINUTE; PRESSURE ＞0.5MPA QUANTITY AVAILABLE: 1 Learn More -
G-2023 OPEN END SPINNING PLANTREFERENCE NUMBER: G-2023 OPEN END SPINNING PLANT FOR SALE: INCLUDING TWISTING DEPARTMENT FOR THE PRODUCTION OF COARSE COTTON YARNS (TWISTED) BLOWROOM FOR COTTON, TRUTZSCHLER, YEAR 2004 CARDING TRUTZSCHLER 2004 DRAWING TRUTZSCHLER 2004 SPINNING SCHLAFHORST TWISTING STEAMING XORELLA 2004 AIR CONDITIONING MARTEL 2004 QUANTITY AVAILABLE: 1 Learn More -
M-4250 TRUTZSCHLER CARDS MODEL TC-03 YEAR 2005 -FOR COTTONREFERENCE NUMBER: M-4250
TRUTZSCHLER CARDS MODEL TC-03 YEAR 2005 -FOR COTTON
MAKE: TRUTZSCHLER CARD
MODEL: TC-03
YEAR: 2005
WITH TRUTZSCHLER DFK CHUTE
WITH TRUTZSCHLER CAN COILER
CAN SIZE 40"x42"
AUTOMATIC CAN CHANGER
AUTOLEVELLER
3 LICKER-IN
QUANTITY: 3
Learn More -
TT-7097 NSC GV20M MACHINE, YEAR 2002TT-7097 NSC GV20M MACHINE, YEAR 2002 1. MACHINE TASK: DOUBLING/DRAFTING 2. MACHINE TYPE: DRAFTING MACHINE, PREPERATION PASSAGE 3. MACHINE MODEL: NSC-GV20M 4. YEAR: 2002 QUANTITY: 1 Learn More -
TT-6598 MTU 20V4000L64FNER TR OPEN TYPE NATURAL GAS GENSET, 2.5 MW, 50 Hz, 1500 RPM, YEAR 2024TT-6598 MTU 20V4000L64FNER TR OPEN TYPE NATURAL GAS GENSET, 2.5 MW, 50 Hz, 1500 RPM, YEAR 2024 1. MTU 20V4000L64FNER TR OPEN TYPE NATURAL GAS GENSET 2. 1 UNIT 400 V 3. 2 UNITS 6.3 KV Learn More