Search results for: 'Sante'
- Related search terms
- santex
- santex sa
- santex san
- santex c
- santex D
-
M-4743 SANTEX TENSIONLESS DRYER YEAR 2003 – 5 ZONES – 3200MMREFERENCE NUMBER: M-4743 (111185AKW10U) L SANTEX TENSIONLESS DRYER YEAR 2003 – 5 ZONES – 3200MM SANTEX 5 ZONES TENSIONLESS DRYER WITH 5 MAXON BURNERS, GAS HEATED WIDTH 126” (3.2M) WIDE, HAS 5 GUIDES FOR TUBULAR FABRIC 3-PASS, YEAR 2003 ONLY USED FOR TESTING AT THE BEGINNING AND THEN THEY KEPT IT AS A BACKUP, WHICH NEVER HAPPENED QUANTITY AVAILABLE: 1 Learn More -
M-4136 SANTEX TENTER FRAME YEAR 2003-UP TO 3400mm – 3 ZONE – VERTICAL PIN – HOT OILREFERENCE NUMBER: M-4136 SANTEX TENTER FRAME YEAR 2003-UP TO 3400mm – 3 ZONE – VERTICAL PIN – HOT OIL TYPE: SANTEX TENTER FRAME YEAR: 2003 WORKING WIDTH: 800mm UP TO 3400mm SPEED: 2 UP TO 20 M/MIN CHAIN: VERTICAL PIN CHAIN DRYER: 3 COMPARTMENTS DRYER LENGTH: 6 METERS MAX. TEMP.: 230° C HEATING: DIATHERMIC OIL OIL BOILER: GARIONI NAVAL TH 500 CAPACITY: 581 KW, MAX. TEMP. 350° C, NITROGEN COVERED TOTAL LENGTH NEEDED: APPROX. 20,000mm TOTAL WIDTH OF MACHINE: 6,200mm TOTAL HEIGHT OF MACHINE: 3,100mm ENTRY COMBINATION GUIDING CHAIN FOR A-FRAMES CORRECT POSITIONING RUBBERIZED ROLLERS AS INFEED UNIT WECO IMPREGNATION UNIT, CONTROL AND TANK ROLLER WITH LOAD CELL MAHLO WEFT STRAIGHTENER, TYPE: RFMC-10A 6 MEASURING HEADS, WW 4200mm OPERATION PEDESTAL OPERATION PANEL, MONITOR 1 UPPER INFEED ROLLER + 1 BENDED ROLLER E+L FABRIC INFEED VERTICAL PIN CHAIN 3 SECTIONAL DRYER (6 M) COOLING UNIT AT EXIT 2 CAMERAS VIDEO CONTROL STRETCH WORK: 2 PRESSING ROLLERS 3 HEATED DRAG ROLLERS WITH SINGLE DRIVE TEMPERATURE 80° C TO 250° C ON-WINDING UNIT FOR A-FRAMES ELECTRICAL CABINET QUANTITY AVAILABLE: 1 Learn More
-
L-4742 SANTEX 4 ROLL THERMOBONDING CALANDER, WIDTH 2800mm, YEAR 2002SANTEX 4 ROLL THERMOBONDING CALANDER, WIDTH 2800mm, YEAR 2002
YEAR: 2002
WIDTH: 2800mm
4 ROLL
NO HEATING INCLUDED
WAS USED AS A COOLING CALANDER
ABLE TO CONNECT TO A HEATING UNIT (WITH 2 HEATED ROLLERS)
Learn More -
L-5097 SANTEX OPEN WIDTH COMPACTOR, WIDTH 2600mm, STEAM HEATED, YEAR 2010REFERENCE NUMBER: L-5097
SANTEX OPEN WIDTH COMPACTOR, WIDTH 2600mm, STEAM HEATED, YEAR 2010
QUANTITY: 1
Learn More -
M-6248 SANTEX DRYER YEAR 1997 WIDTH 2400mmM-6248 SANTEX DRYER YEAR 1997 WIDTH 2400mm
DRYING MACHINE
MAKE: SANTEX
WORKING WIDTH: 2400mm
YEAR: 1997
DOUBLE FOULARD
GAS-HEATED
NUMBER OF ROOMS: 5MACHINE IS IN VERY GOOD CONDITION
QUANTITY: 1
Learn More -
C-4395 SANTEX DOUBLE CYLINDER THERMOBONDING CALENDER, WORKING WIDTH 2800mm, YEAR 2002C-4395 SANTEX DOUBLE CYLINDER THERMOBONDING CALENDER, WORKING WIDTH 2800mm, YEAR 2002
THERMOBONDING CALENDER
DOUBLE CYLINDER
MAKE: SANTEX
YEAR: 2002
WORKING WIDTH: 2800mmQUANTITY: 1
Learn More -
V-1360 SANTEX THERMOBONDING COMPRESSION OVEN FOR NONWOVENS ON ROLL, 80 TO 400 G/M, YEAR 1986V-1360 SANTEX THERMOBONDING COMPRESSION OVEN FOR NONWOVENS ON ROLL, 80 TO 400 G/M, YEAR 1986
WORKING WIDTH: 2500mm
ROLL FACE WIDTH: WORKING WIDTH + 50mm
MATERIAL FIBERS: NONWOVEN WEB OF POLYESTER OR DIFFERENT FIBERS MIXED WITH 10 TO 25% POLYESTER BI-COMPONENT BINDER FIBERS OR DIFFERENT BINDER FIBERS
MACHINE SPEED: 1 TO 20 M/MIN. (OTHERS UPON REQUEST)
COMPOSITION OVEN: 2 HEATING ZONES OF 2 M EACH + 1 COOLING SECTIONQUANTITY: 1
Learn More -
C-3854 SANTEX DRYER SANTASHRINK YEAR 2003REFERENCE NUMBER: C-3854
SANTEX DRYER
MODEL: SANTASHRINK
3 CHAMBERS GAS HEATED
YEAR: 2003
QUANTITY: 1
Learn More -
C-3853 SANTEX DRYER SANTASHRINK YEAR 2001REFERENCE NUMBER: C-3853
SANTEX DRYER
MODEL: SANTASHRINK
3 CHAMBERS GAS HEATED
YEAR: 2001
QUANTITY: 1
Learn More -
A-1291 SANTEX SANTA SOFT 200 SOFTENING MACHINE – YEAR 2000 – WIDTH 2000 MMREFERENCE NUMBER: A-1291 (01013JGHB12UM) A SANTEX SANTA SOFT 200 SOFTENING MACHINE – YEAR 2000 – WIDTH 2000 MM YEAR: 2000 ROLLER WIDTH 2000mm GAS AND STEAM HEAT PLAVA MOISTURE CONTROLS ENTRY SCRAY WITH GUIDERS TWO ROLL PADDER TWO SECTION CONTINUOUS TUMBLER EL SPREADING AND CENTERING DEVISE PLAITER QUANTITY AVAILABLE: 1 Learn More