Search results for: 'water bath'

YY-3049 PP RAFFIA TWINE MACHINE LINE 3000KG PER 24 HOURS ASK FOR MORE DETAILS! QUANTITY: 1 Learn More

YY-3048 PP RAFFIA TWINE MACHINE LINE 2000KG PER 24 HOURS ASK FOR MORE DETAILS! QUANTITY: 1 Learn More

YY-3047 PP RAFFIA TWINE MACHINE LINE 1000KG PER 24 HOURS ASK FOR MORE DETAILS! QUANTITY: 1 Learn More

TT-2433 AMERICAN KUHNE AK 200 30 AG PROFILE EXTRUSION LINE 25 HP, 2”, YEAR 2021 CONDITION: USED QUANTITY: 1 Learn More

TT-1895 ZONCO OPEN WIDTH WASHING MACHINE LL4INOX COMPLETE WITH CENTERING DEVICE BIANCO WASHING MACHINE FOR OPEN-CLOTHS «RAPID» LL-4 INOX HIGH QUALITY RESULTS AND COST REDUCTION THE DATA IN THIS PAMPHLET ARE GIVEN AS AN INDICATION, AND OUR COMPANY IS ENTITLED TO MODIFY THE DESCRIBED MACHINE AT ANY TIME, OWING TO TECHNICAL OR COMMERCIAL REASONS. QUANTITY: 1 Learn More

TT-1816 JC JENN CHONG (PLASCO) MONOFILAMENT EXTRUDER LINE, WORKING WIDTH 200mm, YEAR 2008 PLASCO JENN CHONG MONOFILAMENT EXTRUDER TYPE JC-MNP75 BRAND: PLASCO CONDITION: USED YEAR: 2008 WORKING WIDTH: 200mm QUANTITY: 1 Learn More

REFERENCE NUMBER: M-4038

BENNINGER ZELL MERCERIZER YEAR 2007 WIDTH 1800mm

 

BRAND: BENNINGER ZELL

MODEL YEAR: 2007

ROLLER WIDTH: 2000mm

WORKING WIDTH: 1800mm

TOTAL FABRIC QUANTITY: 160 METERS

SEARCH FOR PRE-WETTING AND IS LOCATED AT THE ENTRANCE TIGHTENING.

MERCERIZED PART: TWO-CHAN, ARE TIGHTENING INTERMEDIATE OUTPUT.

BENNINGER HAS BOMA CONTROL SYSTEM

STABILIZE KISMI : A CHAN , OUTPUT ARE TIGHTENING SEARCH

ELUTING FRACTION CAN OPERATE INDEPENDENTLY

THE MACHINE ONLY FOR THE PURPOSE OF DESTROYING THE AVAILABLE

ELECTRICAL PANEL HAS BEEN DESIGNED ACCORDINGLY BY BENNINGER

WASHING BOATS: FOUR PIECE, BENNINGER WASHING TECHNIQUES APPROPRIATE TO EACH, DOUBLE FABRIC PASS, SEARCH TOP SQUEEZE, INDIRECTLY HEATED, DIRECT WATER SUPPLY AND CHEMICALS SHOULD BE FED TWO BOAT.

EVERY BOAT OUT THERE IN THE FABRIC OPENING AND INTERMEDIATE CLAMPING UNITS HAVE.

THE LAST BOAT IS IN ITSELF CONSISTS OF TWO PARTS, THE BATHROOMS DO NOT MIX.

THE NEUTRALIZATION CAN BE PERFORMED IN THE LAST COMPARTMENT.

THERE ARE AUTOMATIC ACID DOSAGE UNIT.

THERE ARE 7.5 KN CLAMPING CYLINDER IN THE OUTPUT SECTION.

SEARCH SQUEEZED FABRIC FROM THE FABRIC CENTERING.

THROUGH THE WINDER UNIT IS WRAPPED IN THE DOCK

Learn More

REFERENCE NUMBER: M-3024 (7703KHDRYN6R) BRUCKNER BOPP LINE 7000mm YEAR 1986 – RECONSTRUCTED 5 LAYER 7000mm BRUCKNER BOPP LINE YEAR 1986 - YEAR OF RECONSTRUCTION: 1996/97/99/2006/12 - CAPACITY CUSTOMER ROLLS (T/A) (1): 18000 (SHD 35-40) - MAXIMUM OUTPUT (KG/HR): 3500 (3) MAXIMUM SPEED (M/MIN) - DESIGN 320 - IN PRODUCTION 270 - FILM WIDTH (TRIMMED) (mm): 7000 - POSSIBLE FILM THICKNESS (MICRON): 20-100 (8) - MAIN FILM: WHITE OPAQUE FILM 3-5 LAYERS MAIN EXTRUDER - TYPE: C - 200/250 (5) - MANUFACTURER: MITSUBISHI CO-EXTRUDER 1) TYPE: KME 75-36 - (OUTER LAYERS) - MANUFACTURER: KRAUS MAFFEI 2) TYPE: KME 75-36 - MANUFACTURER: KRAUS MAFFEI SATELITE EXTRUDER 1) TYPE: E 150 (4) - MANUFACTURER: BARMAG 2) TYPE: KME 1 - 125 (4) - MANUFACTURER: KRAUS MAFFEI DIE - TYPE: 2 X 900/3 LAYER - 1 X 960/5 LAYER - MANUFACTURER: BIG LIFT /EDI COOLING EQUIPMENT: CHILL ROLLS AD = 1800 MM AND WATER BATH (7) MDO: - PREHEATING: LHK (7) - MANUFACTURED: BRÜCKNER ST. TDO - MANUFACTURER: DORNIER - LENGTH PREHEATING (M) 18 - LENGTH STRETCHING (M) 12 - TOTAL LENGTH (M) 51 CHAIN - TYPE: DORNIER (6 ROLLEN) PULL ROLL - TREATMENT: BOTH SIDES - E-CORONA WINDER - MANUFACTURER: KAMPF YEAR OF MANUFACTURE: 2006 GRINDERS - PREFILM MILL - FILM BREAK MILL (INLINE) - 1 OFF LINE FEED MILL (1) SPECIFIC TONS (MAIN TYPE) (3) INCLUSIVE NORMAL CO-EXTRUSION (4) SINGLE SCREW EXTRUDER (5) CASCADE EXTRUDER (6) DOUBLE SCREW EXTRUDER (7) HOECHST DESIGN (8) VOIDED CAN BE SEEN RUNNING AND HAS BEEN MODIFIED A NUMBER OF TIMES SINCE ORIGINAL CONSTRUCTION QUANTITY AVAILABLE: 1 Learn More