Search results for: 'Panel+c''

REFERENCE NUMBER: P-1232 NOWO BLOW FIBRE FILLING LINES YEAR 2004/2006 CYCLONE WITH 2 DUST BAGS NOWO BLOW FIBRE FILLING LINES YEAR: 2004 CYCLONE WITH 2 DUST BAGS SILO IMS500 SPRAY 50 BALL FIBRE MACHINE EXCLUDING CONTROL PLC AND SCREEN – AVAILABLE FOR EXTRA COST LINE 1 SILO 500-3 YEAR 2004 WEIGHING UNIT YEAR 2004 BLOW FILLING STATION WITH TABLE LINE 2 SUITABLE FOR FEATHER AND FIBRE SILO IMS 1000 YEAR 2006 WEIGHING UNIT YEAR 2004 BLOWING STATION WITH TABLE BLENDING MACHINE MIXING CHAMBER BS 8 FOR FEATHER and POLYESTER YEAR 2006 FIRE RETARDANT APPLICATOR * THE BALL FIBRE MACHINE (ROTOR AND CYCLONE) INCLUDES THE PANEL BUT EXCLUDES THE TOUCH SCREEN AND PLC AS THESE CONTROL ANOTHER ROTOR WHICH THE CUSTOMER IS RETAINING. WE CAN SUPPLY A NEW PLC AND SCREEN (EXTRA PRICE) OR YOU CAN DO IT IN-HOUSE IT DOES NOT INCLUDE A BALE OPENER OR PRE-OPENER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-1813 DORNIER ATVF6 AIRJET LOOM FOR TERRY FABRICS CX 880, WIDTH 3200mm, YEAR 2002, STAUBLI JACQUARD, 6 COLORS DETAILS: YEAR: 2002 WORKING WIDTH: 3200mm PANEL AT-2 STAUBLI JACQUARD MODEL: CX 880 WITH 2688 HOOKS CONTROLLER JC5 6 COLORS 6 WEFTFEEDERS TYPE ELECTROTEX SUPER ELF 7 WARPBEAMS 800mm 9 PILEBEAMS 1000mm QUANTITY AVAILABLE: 5 Learn More

REFERENCE NUMBER: C-2230 DORNIER RAPIER LOOM FOR TECHNICAL FABRICS HTVD M/E10, WIDTH 2500mm, YEAR 2001, CAM DETAILS: MAKER: DORNIER TYPE: HTVD M/E10 YEAR: 2001 WIDTH: 2500mm STAUBLI 1761 CAM DEVICE FOR 10 LEVERS WITH ELECTR. WEFT MIX- PICK FINDING NEGATIVE GRIPPER AND READY FOR INVERTER WITH DIALOG PANEL 2 1.5 WARPER BEAMS 1.5 CLOTH ROLLER 2 WEFT FEEDER 6 HELD FRAMES CA. 8.000 HEALD AND DROP WIRES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-1146 MAK CARDING LINE , WIDTH 1850MM, WITH 8 X 8 GOOD ENDS. SPECIFICATIONS: CARDING LINE MAK 1850 MM WORKING WIDTH. THE LINE IS CONSISTING OF: 1 AUTOMATIC FEEDER WITH AUTOMATIC WEIGHING DEVICE. 1 TAKER-IN. 1 FIRST ROLLER. 1 DUESBERG BOSSON CLEANER 1 CONTINUOUS SLIVER ROLLER (SOFT ENDS) 8 X 8 GOOD ENDS. 1 EDGE CLEANER. 1 DRIVING MOTOR BLOC, WITH CONTROL PANEL OR SWITCH BOARD. 1 VÖGEL GREASER. THE COMPLETE LINE IS IN STORAGE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-1148 CARDING LINE MAK, WIDTH 1850MM, WITH ROSINK COILERS SPECIFICATIONS: CARDING LINE MAK 1850 MM WORKING WIDTH. THE LINE IS CONSISTING OF: 1 AUTOMATIC FEEDER WITH AUTOMATIC WEIGHING DEVICE. 1 TAKER-IN. 1 FIRST ROLLER AND 1 SECOND ROLLER. 1 DUESBERG BOSSON CLEANER. 1 SLIVER CONVEYOR SPREADER BELT. 1 EDGE CLEANER. 2 DRIVING MOTOR BLOCS, WITH CONTROL PANEL/SWITCH BOARD. 1 VÖGEL GREASER. 10 ROSINK COILERS (DRIVEN FROM THE LIN WITH 2 SMALL MOTORS. FOR WARPING PER 5 COILERS THE COMPLETE LINE IS IN OPERATION. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4038

BENNINGER ZELL MERCERIZER YEAR 2007 WIDTH 1800mm

 

BRAND: BENNINGER ZELL

MODEL YEAR: 2007

ROLLER WIDTH: 2000mm

WORKING WIDTH: 1800mm

TOTAL FABRIC QUANTITY: 160 METERS

SEARCH FOR PRE-WETTING AND IS LOCATED AT THE ENTRANCE TIGHTENING.

MERCERIZED PART: TWO-CHAN, ARE TIGHTENING INTERMEDIATE OUTPUT.

BENNINGER HAS BOMA CONTROL SYSTEM

STABILIZE KISMI : A CHAN , OUTPUT ARE TIGHTENING SEARCH

ELUTING FRACTION CAN OPERATE INDEPENDENTLY

THE MACHINE ONLY FOR THE PURPOSE OF DESTROYING THE AVAILABLE

ELECTRICAL PANEL HAS BEEN DESIGNED ACCORDINGLY BY BENNINGER

WASHING BOATS: FOUR PIECE, BENNINGER WASHING TECHNIQUES APPROPRIATE TO EACH, DOUBLE FABRIC PASS, SEARCH TOP SQUEEZE, INDIRECTLY HEATED, DIRECT WATER SUPPLY AND CHEMICALS SHOULD BE FED TWO BOAT.

EVERY BOAT OUT THERE IN THE FABRIC OPENING AND INTERMEDIATE CLAMPING UNITS HAVE.

THE LAST BOAT IS IN ITSELF CONSISTS OF TWO PARTS, THE BATHROOMS DO NOT MIX.

THE NEUTRALIZATION CAN BE PERFORMED IN THE LAST COMPARTMENT.

THERE ARE AUTOMATIC ACID DOSAGE UNIT.

THERE ARE 7.5 KN CLAMPING CYLINDER IN THE OUTPUT SECTION.

SEARCH SQUEEZED FABRIC FROM THE FABRIC CENTERING.

THROUGH THE WINDER UNIT IS WRAPPED IN THE DOCK

Learn More

REFERENCE NUMBER: C-1169 BRUCKNER STENTER , WORKING WIDTH 2400MM,YEAR 1995 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-9488 NONWOVEN LINES FOR GEOTEXTILES 3200mm TO 5000mm A) NEEDLING LINE FOR GEOTEXTILE B) NEEDLING LINE FOR GEOTEXTILE QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: A-1224 (0101GHBXX12) A GALVANIN DRYER FOR BOBBINS YEAR 2002 GALVANIN DRYER FOR BOBBINS YEAR: 2002 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1221 (0101GHBXX12) A GALVANIN BOBBINS HYDRO EXTRACTOR CRA 800 YEAR 1993 GALVANIN BOBBINS HYDRO EXTRACTOR CRA 800 YEAR: 1993 1230 RPM 42 KG. WITH ELECTRIC PANEL QUANTITY AVAILABLE: 1 Learn More